Aging Heat
Mostrando 1-12 de 91 artigos, teses e dissertações.
-
1. Effect of Sigma Phase Precipitated at 850 °C on Corrosion Behaviour of UNS S82441 Duplex Stainless Steel
ABSTRACT Duplex stainless steels (DSS) are alloys with binary microstructure consisting of ferrite (δ) and austenite (γ), combining high mechanical properties and corrosion resistance by pitting and stress corrosion, due to the two phases austenite/ferrite. However, the formation of secondary and intermetallic phases, during solidification processes, heat
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Estudo do envelhecimento e do tratamento térmico de rejuvenescimento da superliga GTD111
RESUMO A superliga de níquel GTD111 é comumente utilizada na fabricação de pás de turbinas a gás, destinadas a geração de energia e aplicações aeronáuticas. O presente estudo investiga o comportamento desta superliga “como fornecida” pelo fabricante e previamente tratada termicamente à fim de diminuir o tamanho de γ’ e transformá-lo de mo
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Microstructural Adjustments and Tensile Properties of a Hot-Forged Ti−22Al−23Nb−3V−Y Alloy
Microstructures and tensile properties of a hot forged Ti−22Al−23Nb−3V−Y alloy were investigated systematically. Different heat treatments were performed to adjust the wrought microstructure to optimize tensile properties. It was found that features of O phase precipitates and its volume fraction was rather sensitive to the cooling rate after the sol
Mat. Res.. Publicado em: 19/08/2019
-
4. Mechanical Properties Analysis of Al2024 alloy Submitted to Different Aging Time and different Cold Plastic Deformation degree
Brazilian aeronautical industries report that, due to the high mechanical properties presented commercially, AA2024-T351 alloy presents fissures and non-homogeneous deformations during the mechanical processing. This work proposes a manufacturing process capable of increasing the ductility of the material to withstand tensions during processing and a subsequ
Mat. Res.. Publicado em: 10/07/2019
-
5. Effect of Extrusion and Heat Treatment on Microstructure and Mechanical Properties of Hypereutectic A390-0.3wt%Nd Alloy
An hypereutectic aluminium alloy with a composition of 16-18wt%Si, 4-5wt%Cu, 0.45-0.65wt%Mg, 0.3wt%Nd and Al balance (A390-0.3wt%Nd alloy) was processed by extrusion and aging at 200ºC for 10 hours. The effect of the thermomechanical processing and heat treatment on microstructure and mechanical properties was investigated for A390-0.3wt%Nd alloy. It was sh
Mat. Res.. Publicado em: 10/06/2019
-
6. Influência da porosidade em algumas propriedades mecânicas da liga de Al-6,5%Si-0,6%Mg fundida e tratada termicamente
RESUMO As ligas de Al-Si-Mg são atualmente as mais utilizadas para obtenção de peças fundidas comerciais, isto porque as propriedades mecânicas desses materiais podem ser melhoradas através de tratamentos térmicos. No entanto, cabe salientar que nas peças fundidas de ligas de alumínio, a porosidade é o defeito que ocorre mais frequentemente. Esse d
Matéria (Rio J.). Publicado em: 20/05/2019
-
7. Effect of Aging Heat Treatment H950 and H1000 on Mechanical and Pitting Corrosion Properties of UNS S46500 Stainless Steel
The effect of aging temperature on mechanical and pitting corrosion properties of UNS S46500 was investigated. Tensile and Hardness tests were carried out and the microstructure was analyzed by optical microscopy, scanning electron microscopy and X-ray diffraction; Thermo-Calc simulations helped in the phase identification. Pitting corrosion properties were
Mat. Res.. Publicado em: 08/11/2018
-
8. Heat Treatment Effects on ASTM A890/A 890M GR 5A Super Duplex Stainless Steel Passivity
Heat treatment can modify the corrosion resistance of stainless steels. Thus, the corrosion behavior of ASTM A890/A 890M GR 5A super duplex stainless steels (SDSS) has been investigated in aqueous 60,000 ppm NaCl solution by several electrochemical tests. The specimens were aged for 2, 10, 50 and 100 hours at 475 ºC. Potentiodynamic polarization studies sho
Mat. Res.. Publicado em: 22/01/2018
-
9. The Effect of Heat Treatment on Dynamic Strain Aging Behaviour of AISI H10 Hot Work Tool Steel
Dynamic strain aging (DSA) behaviour of hot work tool steel (H10) was investigated under as- received (AR) and as-quenched (AQ) conditions. Hot tensile test was carried out in the temperatures of 25°C-700°C at a strain rate of 1x10-3s-1. The tensile properties indicated that AQ samples showed an increase in yield strength (YS) and ultimate tensile strength
Mat. Res.. Publicado em: 18/12/2017
-
10. Effect of Ferrite on the Precipitation of σ Phase in Cast Austenitic Stainless Steel Used for Primary Coolant Pipes of Nuclear Power Plants
The effect of ferrite phase on the precipitation of σ phase in a Z3CN20.09M cast austenitic stainless steel (CASS) used for primary coolant pipes of pressurized water reactor (PWR) nuclear power plants was investigated by using isothermal heat-treatment, optical microscopy (OM), transmission electron microscopy (TEM) and electron probe microanalysis (EPMA)
Mat. Res.. Publicado em: 28/09/2017
-
11. Embrittlement and Corrosion Decay of a Cast Duplex Stainless Steel
Duplex stainless steels (DSS) are Fe-Cr-Ni-Mo alloys, with low carbon content, which have a favorable combination of mechanical properties and corrosion resistance. These characteristics are mainly attributed to a dual phase and refined microstructure, typical of these alloys, consisting of similar amounts of ferrite and austenite. For this reason, DSS are w
Mat. Res.. Publicado em: 20/07/2017
-
12. Factors Affecting Kinetics of Strain Aging in S275JRC Steel
The materials parameter i.e. microstructure as well as the processing factors i.e. aging time and temperature, the amount of plastic deformation, and residual stresses affecting the kinetic of strain ageing in the S275JRC steel were investigated in detail. For this purpose, 5 % pre-strained steel was aged at 160ºC for different intervals. The ageing behavio
Mat. Res.. Publicado em: 19/12/2016