Slag
Mostrando 13-24 de 161 artigos, teses e dissertações.
-
13. Analysis of the chloride diffusion coefficients by different test methods in concrete mixtures containing metakaolin and high-slag blast-furnace cement
ABSTRACT This study aims to evaluate the chloride diffusion coefficient and the service life (SL) of concretes containing metakaolin and high-slag blast-furnace cement (HSBFC). Accelerated methods of chloride ion diffusion and migration (RCPT, RMT, BDT and multiregime test method) were used. To produce the specimens, HSBFC resistant to sulphates (CPIII 40 RS
Matéria (Rio J.). Publicado em: 25/11/2019
-
14. Análise da redução da alcalinidade de compósitos cimento-madeira em função da substituição parcial do cimento Portland por pozolanas
RESUMO O objetivo desta pesquisa foi avaliar a redução da alcalinidade de compósitos cimento-madeira, produzido com cimento Portland e partículas residuais de Pinus spp., em função da substituição gradual do cimento Portland pelas pozolanas sílica ativa (SA) metacaulim (MK), cinza volante (CV), escória de alto-forno (EAF), cinza de casca de arroz (
Matéria (Rio J.). Publicado em: 25/11/2019
-
15. Fundente para Recargue por Soldadura con Arco Sumergido a Partir de Ferrocromo-manganeso y Escoria de la Reducción Simultánea de Cromita y Pirolusita
Abstract The obtaining of a flux for hardfacing by Submerged Arc Welding (SAW), using ferrochrome-manganese and slag obtained from the simultaneous carbothermal reduction of chromite and pyrolusite is addressed. The ferrochrome-manganese and the slag were obtained, conceiving that both products satisfy the requirements of the components (alloy system and ma
Soldag. insp.. Publicado em: 24/10/2019
-
16. Effect of Curing Temperature, Activator Solution Composition and Particle Size in Brazilian Fly-Ash Based Geopolymer Production
The geopolymer binder is a relatively new class of inorganic binding material of elevated mechanical strength and good chemical properties. This can be produced using clay minerals or byproducts of the industrial processes, such as metakaolin, fly-ash and blast furnace slag. In this work, geopolymers were produced by alkaline activation of a Brazilian fly-as
Mat. Res.. Publicado em: 22/08/2019
-
17. Pervious concrete made with electric furnace slag (FEA): mechanical and hydraulic properties
Resumo O objetivo deste trabalho é viabilizar o uso de escória de forno elétrico (FEA) em substituição ao agregado graúdo convencional na fabricação de concreto permeável (CoPe), atingindo os parâmetros mínimos exigidos pela norma NBR16416/2015. Esta substituição minimizaria a utilização de agregados naturais, além de aproveitar um resíduo q
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
18. Experimental Investigation on the Evolution of Hydrogen in Steel during the Electroslag Remelting Process
Hydrogen, which is a harmful element, has a great effect on the mechanical properties of steel, should be removed during the steel manufacture process. The evolution of hydrogen content in steel during electroslag remelting process is experimentally investigated. The results show that during the electroslag remelting process, the hydrogen content in steel fi
Mat. Res.. Publicado em: 13/06/2019
-
19. Copper slag from different dumps in the Atacama Region used in mortars as partial replacement of cement
ABSTRACT The use of copper slag as a partial substitute for cement in mortar preparation was studied. Copper slag samples were collected from three dumps in the Atacama Region (Northern Chile). Mortars of 40x40x160 mm (width, height, length) and curing times of 7, 28 and 90 days were used in mechanical testing. Tests were performed with 0% (control mortar),
Matéria (Rio J.). Publicado em: 10/06/2019
-
20. Investigación de diseños de mezcla para producir Ultra High Performance Fiber Reinforced Concrete (UHPFRC) usando ANOVA
ABSTRACT An experimental study is presented to produce Ultra High Performance Fiber Reinforced Concrete (UHPFRC) including industrial waste in the mix, and determine the average compressive strength. The study includes factor arrangements to perform analysis of variance using ANOVA. The controllable factors were: (i) age of the sample; (ii) granulometry of t
Matéria (Rio J.). Publicado em: 10/06/2019
-
21. Alkaline activation of high-calcium ash and iron ore tailings and their recycling potential in building materials
Resumo Materiais álcali ativados são aglomerantes obtidos a partir da ativação alcalina de precursores ricos em alumínio e silício. Os precursores mais comuns utilizados para ativação são as cinzas com baixo teor de cálcio, as escórias de alto forno e o metacaulim. Contudo, a cinza de cavaco de eucalipto (CCE) e o rejeito de minério de ferro (RMF
Ambient. constr.. Publicado em: 10/06/2019
-
22. Concretos com agregados reciclados de resíduos de construção e demolição e adições minerais: uma análise bibliográfica
RESUMO Os impactos ambientais causados pela produção do concreto precisam ser reduzidos para torná-lo um material mais sustentável. O uso de agregados reciclados em substituição aos agregados naturais e das adições minerais em substituição parcial ao cimento são alternativas que podem tornar o concreto um material com menor carga de poluentes asso
Matéria (Rio J.). Publicado em: 10/06/2019
-
23. Cenizas de cascarilla de arroz para la activación alcalina de cementantes binarios (ceniza volante/escoria de alto horno)
ABSTRACT Alkali activated mortars made of class F fly ash and blast furnace slag were cast, in order to study the effect of an alternative source of silica on its properties of fluidity and compressive strength. Rice husk ash and sodium silicate solution, mixed with sodium hydroxide, were used for activation of mortars. The mineralogical and structural infor
Matéria (Rio J.). Publicado em: 20/05/2019
-
24. Steel slag and phosphate nutrition of corn inoculated with arbuscular mycorrhizal fungi
Resumo: O objetivo deste trabalho foi avaliar o efeito do uso de escória de siderurgia como corretivo da acidez do solo e de fungos micorrízicos associados à adubação fosfatada em plantas de milho. O trabalho foi conduzido em casa de vegetação, tendo-se utilizado vasos com 3 kg de Latossolo Vermelho distrófico, em arranjo fatorial 4x5x2, com quatro t
Pesq. agropec. bras.. Publicado em: 06/05/2019