Mullite
Mostrando 1-12 de 41 artigos, teses e dissertações.
-
1. Microstructural characteristics, properties, synthesis and applications of mullite: a review
Abstract Mullite, an intermediate phase of the binary alumina-silica system, is one of the most important phases of ceramic products containing alumina and silica in the initial composition. Its stoichiometry ranges from 3Al2O3.2SiO2 (3:2) to 2Al2O3.SiO2 (2:1) and its crystalline structure is orthorhombic, characterized by the presence of octahedral chains o
Cerâmica. Publicado em: 2022
-
2. Mullite macro-needles for reinforcement of refractory castables
Abstract Ceramic macro-needles incorporation as reinforcement in commercial refractory castable was studied. Ceramic macro-needles (Ø2x20 mm) were made from kaolinite clay and gibbsite to obtain mullite as the main crystalline phase. Specimens with the ceramic reinforcement were evaluated by compression after being treated at two temperatures (815 and 1400
Cerâmica. Publicado em: 2022
-
3. Evaluation of the use of silica-alumina refractory waste as a supplementary cementitious material
Abstract The use of supplementary cementitious materials (SMCs) is one of the three essential factors for the sustainability of the cement industry. To reduce CO2 emissions, several studies have introduced new methods for the utilization of industrial wastes such as the addition into cementitious materials. The objectives of this study were to chemically and
Cerâmica. Publicado em: 2021-06
-
4. QUANTIFICAÇÃO DE MULLITA PROVENIENTE DE RESÍDUOS DE CAULIM DA REGIÃO AMAZÔNICA: USO DO MÉTODO DE RIETVELD
Mullite is used to obtain a refractory material, there are several factors that influence the synthesis process of mullite: the preparation of the mixture, the precipitation and the reaction of SiO2 and Al2O3. For the synthesis of mullite, samples of kaolin processing residues were used as precursor material, because it presents SiO2 and Al2O3 in its composi
Quím. Nova. Publicado em: 2021-04
-
5. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
6. CATALYTIC OXIDATION OF ISOPROPYL ALCOHOL OVER PLATINUM BASED CATALYST: A STUDY OF THE EFFECT OF METHYL CELLULOSE ON Pt PARTICLES DISPERSION OVER MULLITE
Abstract Isopropyl alcohol (IPA) catalytic oxidation remains one of the most popular techniques to remove volatile organic compounds from indoor places. In our study, catalytic oxidation of IPA was investigated on catalysts based on platinum deposited on mullite (Al6Si2O13), known for its excellent thermal stability. Pt/Al6Si2O13 catalysts were prepared by i
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
7. Influência do tipo de solvente na síntese de mulita pelo método Pechini
Resumo Mulita é um aluminossilicato com grande importância na tecnologia cerâmica. Sua síntese através de métodos químicos tem sido extensivamente estudada, no entanto, não se observam estudos da sua obtenção pelo método Pechini. Assim, este estudo teve por objetivo a síntese de mulita por meio deste método. Foi avaliada a influência de diverso
Cerâmica. Publicado em: 15/08/2019
-
8. Mineralogy and preliminary assessment of the potential uses of alluvial clays from Batouri (Eastern-Cameroon)
Resumo Este estudo teve como objetivo avaliar os usos potenciais de materiais argilosos aluviais de Batouri. Suas características mineralógicas, químicas e algumas físico-mecânicas são apresentadas, bem como algumas características de tijolos queimados em 900, 950, 1000, 1050 e 1100 °C. As matérias-primas consistiram de caulinita, quartzo, feldspato
Cerâmica. Publicado em: 15/08/2019
-
9. Development of hollow fiber membranes with alumina and waste of quartzite
The development of ceramic membranes with different geometries and compositions extends the possibilities of industrial applications, inducing advantages in terms of increased permeability, membrane area by volume module and chemical, thermal and mechanical resistance. The use of low-cost raw materials is a trend that has grown in scientific research. The ai
Mat. Res.. Publicado em: 12/08/2019
-
10. Thermal behavior (TG-DTA-TMA), sintering and properties of a kaolinitic clay from Buenos Aires Province, Argentina
Resumo As propriedades tecnológicas de um caulim local, considerado um potencial material industrial, foram correlacionadas com o comportamento térmico e processos de sinterização realizados por meio de uma série de análises termoquímicas. A caracterização química e mineralógica do material foi realizada, juntamente com uma simples caracterizaçã
Cerâmica. Publicado em: 06/06/2019
-
11. Influence of Processing Variables on Clay-Based Ceramic Formulations
The properties of ceramic materials and microstructural changes are dependent on the raw materials from which they are made and on the manner in which they are processed, from the composition to the established thermal treatment, heating rate, and firing temperature. In this study, the influence of some processing parameters (formulation, maturation time, an
Mat. Res.. Publicado em: 11/03/2019
-
12. Dielectric and electrical properties of a mullite/glass composite from a kaolinite clay/mica-rich kaolin waste mixture
Resumo Um compósito mulita/fase vítrea foi preparado por sinterização reativa de uma mistura argila caulinítica/resíduo de caulim rico em mica com 25% em massa de resíduo. A composição de fase, microestrutura, propriedades dielétricas e elétricas do compósito sinterizado a 1400 °C foram avaliadas por difração de raios X, microscopia eletrônic
Cerâmica. Publicado em: 2019-01