Mullite
Mostrando 13-24 de 41 artigos, teses e dissertações.
-
13. Size Effects on Fracture Parameters of High Alumina Refractories
The randomness of phase compositions and their distribution as well as the micro cracks and pores in refractories result in the dependence of mechanical properties on the sample size. In this work, the size effects on fracture parameters including bending strength, elastic modulus and fracture toughness of high alumina bricks were investigated by testing sam
Mat. Res.. Publicado em: 10/07/2018
-
14. Preparation and Characterization of Mullite-Alumina Structures Formed "In Situ" from Calcined Alumina and Different Grades of Synthetic Amorphous Silica
The in situ reaction between alumina and silica to obtain mullite (Al6Si4O13) can be significantly affected by using synthetic amorphous silica (SAS) sources instead of crystalline ones (quartz and cristobalite). For instance, SASs promote early mullite formation (below 1300°C) and greater densification during sintering. This paper reports the "in situ" for
Mat. Res.. Publicado em: 12/03/2018
-
15. Cellular Ceramics Produced from Ceramic Shell: Processing and Characterization
In this work, ceramic shell (mullite source), an industrial solid waste from the lost-wax casting process, after crushing and milling steps, was used and evaluated as an alternative raw material source for the production of cellular ceramics for high temperature applications (> 1400 °C). The obtained ceramic shell powder, with particle size distribution (d5
Mat. Res.. Publicado em: 09/11/2017
-
16. Characterization of Mullite Ceramic Membranes and their Application in the Removal Escherichia Coli
This paper aims the morphological and structural characterization of ceramic membranes of mullite and their application in the removal of Escherichia coli. A complex irregular structure presented by the pores of the membrane was verified by scanning electron microscopy (SEM). The average pore size and distribution were determined by mercury intrusion porosim
Mat. Res.. Publicado em: 05/04/2016
-
17. Experience on a Low Cost Way to Obtainal-Ti Ceramic Foams
An experience on a simple process for producing alumina-rutile-mullite ceramic foams by using aqueous particulate slurries is proposed. The sintering process is achieved in one unique thermal process at 1200 ºC in air. The description of the process, physical properties and morphological studies are reported. Microstructure is studied by using confocal opti
Mat. Res.. Publicado em: 2015-08
-
18. Evaluation of the Influence of MgO and La2O3 on the Fast Sintering of Mullite
The influence of MgO and La2O3 on the fast sintering of mullite was evaluated in this work. High-purity mullite was doped with MgO and La2O3, conventionally sintered, fast sintered, and microwave-sintered in rapid sintering cycles. The results showed that MgO and La2O3 strongly affected the densification of fast sintered samples; and only doped bodies reache
Mat. Res.. Publicado em: 2015-02
-
19. Microwave sintering of mullite-Al2O3 from kaolin precursor
In the present work the effect of the microwave hybrid fast sintering of mullite-Al2O3 with non-stoichiometric mullite composition was investigated. Samples were fast sintered using a range of microwave power from 1.2 to 2.1 kW. The mullitization process of the silica-rich composition was faster than that of the alumina-rich composition. Alumina-rich mullite
Mat. Res.. Publicado em: 2014-12
-
20. Influence of Ethylene Glycol on the Mullite Crystallization Processes Analyzed by Rietveld Refinement
ABSTRACT: Mullite is an excellent structural material due to its high temperature stability, high electrical insulation capabilities and creep resistance. This material has a number of technological applications, such as rocket nozzles used in the aerospace industry. In this work, mullite was obtained by sol-gel process, using silicic sol, aluminum nitrate a
J. Aerosp. Technol. Manag.. Publicado em: 2013-12
-
21. Incorporação de resíduos de placas de circuitos impressos (RPCI) em massas cerâmicas triaxiais utilizando experimentos com misturas / Incorporation of waste printed circuit boards (WPCB) in triaxial ceramic bodies using experiments with mixtures
The aim of this work is evaluate the effect of incorporation of waste printed circuit boards (WPCB) in physical and mechanical properties of triaxial ceramics for coating. Through the technique of experiment with mixtures seven formulations were developed with clay (40, 53, 60 e 80%); phyllite (20, 33, 40 e 60%) and waste (0, 14, 20 e 40%). The WPCB was char
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/02/2012
-
22. EFEITO DA MOAGEM DE ALTA ENERGIA NA SÍNTESE DE MULITA
Dentre os materiais cerâmicos, pode-se destacar a mulita, cujas características são de grande interesse industrial. Este material formado por sílica e alumina apresenta elevada resistência mecânica, alta refratariedade e inércia química, além de baixos coeficientes de expansão e condutividade térmica, o que torna a síntese desse material a partir
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/09/2011
-
23. âInfluÃncia da adiÃÃo de cargas inorgÃnicas no desempenho de produtos refratÃrios obtidos a partir de borras de alumÃnioâ / âInfluence of addition of inorganic fillers on the performance of refractory products made from aluminum sludgeâ
ABSTRACT White dross is a reject generated during aluminium production. It contains several oxides that can be useful to the refractories and cement industries. However, white dross can be hazardous both to human health and the environment. In this work, white dross was evaluated as a prospective raw material for the production of refractories. For this purp
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/11/2010
-
24. Statistical design for recycling kaolin processing waste in the manufacturing of mullite-based ceramics
Mineral extraction and processing industries have been cited as sources of environmental contamination and pollution. However, waste recycling represents an alternative recovery option, which is interesting from an environmental and economic standpoint. In this work, recycling of kaolin processing waste in the manufacture of mullite-based ceramics was invest
Materials Research. Publicado em: 2009-06