Mullite macro-needles for reinforcement of refractory castables
AUTOR(ES)
Mocciaro, A.; Cimas, A.; Rendtorff, N. M.; Scian, A. N.
FONTE
Cerâmica
DATA DE PUBLICAÇÃO
2022
RESUMO
Abstract Ceramic macro-needles incorporation as reinforcement in commercial refractory castable was studied. Ceramic macro-needles (Ø2x20 mm) were made from kaolinite clay and gibbsite to obtain mullite as the main crystalline phase. Specimens with the ceramic reinforcement were evaluated by compression after being treated at two temperatures (815 and 1400 °C). The results were compared with those obtained using the same commercial concrete but reinforced with steel fibers and without reinforcement. Compression values presented by specimens with ceramic macro-needles were 74% and 50% higher than specimens with steel fibers after exposition to 815 and 1400 °C, respectively. Based on these results, it was established that ceramic macro-needles are a feasible solution to improve the mechanical resistance of castables exposed to high temperatures.
Documentos Relacionados
- High-alumina spinel refractory castables
- Effect of Specimen Size on the Resistance to Thermal Shock of Refractory Castables Containing Eutectic Aggregates
- Advanced high carbon-containing refractory castables
- Mecanismos de controle da hidratação da magnésia visando sua utilização em concretos refratários
- Physical and mechanical properties of low, ultralow and no cement refractory castables containing MgO nanoparticles developed in situ by means of polymeric resins