Manufacturing Process
Mostrando 25-36 de 552 artigos, teses e dissertações.
-
25. Effect of the motivational factor on lean manufacturing performance: the case of a multinational consumer goods company
Resumo Este estudo visou avaliar os impactos do fator motivacional nos resultados obtidos ao final da implementação de um sistema de manufatura enxuta, em uma empresa multinacional fabricante de bens de consumo. Foram coletados dados dos principais indicadores de desempenho de três linhas de produção, em períodos antes e após a implementação da manu
Gest. Prod.. Publicado em: 08/08/2019
-
26. Mechanical Properties Analysis of Al2024 alloy Submitted to Different Aging Time and different Cold Plastic Deformation degree
Brazilian aeronautical industries report that, due to the high mechanical properties presented commercially, AA2024-T351 alloy presents fissures and non-homogeneous deformations during the mechanical processing. This work proposes a manufacturing process capable of increasing the ductility of the material to withstand tensions during processing and a subsequ
Mat. Res.. Publicado em: 10/07/2019
-
27. Corrosion Behavior of AA7075-T73 Aluminum Alloy During Machining of Aeronautical Components
Corrosion of AA7075-T73 aluminum alloy during machining process was studied. An experimental device was proposed in order to simulate machining procedure. A design of experiments - DOE was used in order to evaluate what process parameter is significant. Some electrochemical tests based on open-circuit potential vs time measurements and potentiodynamic polari
Mat. Res.. Publicado em: 01/07/2019
-
28. A New Conductive Ink for Microstrip Antenna and Bioinspired FSS Designs on Glass and Fiberglass Substrates
Abstract This paper describes an investigation of the possibility of using a new conductive ink, insted of copper clad laminates, in the manufacturing of microstrip patch antennas on glass and fiberglass substrates and of bioinspired frequency selective surfaces (FSSs) on fiberglass substrates for wireless communication systems. The new conductive ink is dev
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
29. A desindustrialização na região Sul
Resumo Este estudo objetiva analisar a evolução da indústria de transformação no Brasil com ênfase na região Sul no período 2002-2014, de modo que seja possível observar a contribuição sulista no processo de desindustrialização do País. Para isso, serão utilizados como forma de análise os indicadores clássicos da desindustrialização. Com e
Cad. Metrop.. Publicado em: 03/06/2019
-
30. Effect of the Chemical Homogeneity of a Quenched and Tempered C-Mn Steel Pipe on the Mechanical Properties and Phase Transformations
Seamless steel pipes for application in the oil and gas industries are manufactured from quenched and tempered steel. Aiming to meet the required characteristics, it is necessary that the microstructure and the mechanical properties are homogeneous along the wall thickness of the pipes, which is even more critical for thick wall pipes. Considering the seamle
Mat. Res.. Publicado em: 03/06/2019
-
31. Implementation of a Flexible Manufacturing System in a production cell of the automotive industry: decision and choice
Abstract Paper aims The purpose is to decide on the technology for the implementation of an FMS in a manufacturing cell that produces the coil for starting engines in a company of the Brazilian automotive industry. Originality The mixed use of structured methods to support a semi-structured decision-making problem. Research method The qualitative-quantita
Prod.. Publicado em: 30/05/2019
-
32. As relações de gênero na produção capitalista do espaço de trabalho
Resumo Este artigo discute o contexto social que originou o espaço de trabalho, ou o espaço exclusivo para o desempenho de atividades produtivistas. O objetivo é demonstrar a dependência que a esfera da produção tem do universo da reprodução e, notadamente, como essa dependência é obliterada e reforçada pelas relações patriarcais. Investigo como
Cad. Pagu. Publicado em: 30/05/2019
-
33. Performance of the INCONEL 625 alloy weld overlay obtained by FCAW process
ABSTRACT Nickel-based weld overlays (cladding) are commonly used in oil & gas industry to extend the life of equipment under corrosive environment, as it improves the corrosion resistance without a significant increase in the manufacturing cost, when compared to a full nickel-based alloy equipment. Although there are extensive literature involving overlays a
Matéria (Rio J.). Publicado em: 20/05/2019
-
34. Influência da composição do gás de proteção nas tensões residuais de juntas de aço DP600 soldadas pelo processo GMAW
RESUMO A indústria automobilística vem investindo em novos processos de fabricação que melhoram a produtividade sem perda da qualidade. Entretanto, a presença de tensões residuais, geradas em todos os processos de fabricação, constitui um dos grandes problemas encontrados na indústria metal mecânica, pois estas podem se somar às tensões de carreg
Matéria (Rio J.). Publicado em: 20/05/2019
-
35. CEP ONLINE: A WEB-ORIENTED EXPERT SYSTEM FOR STATISTICAL PROCESS CONTROL
ABSTRACT In this paper, a new software for Statistical Process Control (SPC) is proposed. The system, the so-called CEP Online, was developed based on statistical computing resources of well-known free softwares, such as HTML, PHP, R and MySQL under an online server with operating system Linux Ubuntu. The main uni and multivariate SPC tools are available for
Pesqui. Oper.. Publicado em: 09/05/2019
-
36. Produção e emprego industrial nos estados brasileiros: evidências de desindustrialização
Resumo Este artigo investiga a hipótese de desindustrialização nos estados brasileiros no período 1996-2014 e se o processo está atrelado às políticas econômicas (taxa de juros e abertura comercial) implementadas no país e ao contexto cambial e de preços favoráveis aos produtos primários. Para isso, analisa indicadores de produção e de emprego
Nova econ.. Publicado em: 09/05/2019