Heat Affected Zone
Mostrando 1-12 de 84 artigos, teses e dissertações.
-
1. The Investigation of the Relationship Between HSP-27 Release and Oxidative DNA Damage in Broiler Chickens with Tibial Dyschondroplasia by Using Histopathological and Immunohistochemical Methods
ABSTRACT Tibial dyschondroplasia (TD) is a skeletal disorder that occurs in the proximal metaphyses of tibiotarsus and sometimes tarsometatarsus, resulting in the development of avascularized and non-mineralized abnormal cartilage and causing significant economic loss. In this study, we aimed to show the histopathological changes and the relationship between
Braz. J. Poult. Sci.. Publicado em: 05/12/2019
-
2. Caracterização Mecânica da Região Soldada de Tailor Welded Blanks (TWB) a Partir do Perfil de Microdureza
Resumo No Tailor Welded Blank (TWB) são soldadas chapas de especificações distintas, antes da conformação. Sua caracterização, na região soldada, por métodos convencionais de tração, pode ser dificultada pelo estreito comprimento da solda. Novas metodologias e alternativas são analisadas. Este trabalho visou caracterizar mecanicamente a região s
Soldag. insp.. Publicado em: 02/12/2019
-
3. Resistência à Corrosão de Juntas Dissimilares dos Aços AISI 316L e da Liga Inconel 718
Resumo A soldagem dissimilar (Dissimilar Metal Welds – DMWs), união de dois diferentes materiais metálicos, tem muitas aplicações industriais, com destaque para trocadores de calor nas usinas nucleares. Portanto, devem resistir à corrosão e a esforços mecânicos, entre outros requisitos. Neste trabalho foi abordada a susceptibilidade à corrosão d
Soldag. insp.. Publicado em: 21/10/2019
-
4. Influence of Nb Content on Sensitization and Pitting Corrosion of Welded AISI 430 Ferritic Stainless Steel
Resumo Neste trabalho, o efeito da adição de Nb na sensitização e corrosão por pite de aço inoxidável ferrítico AISI 430 submetido à soldagem TIG foi investigado por caracterização microestrutural e técnicas eletroquímicas. As três regiões distintas do processo de soldagem, zona fundida, zona termicamente afetada e metal de base do aço AISI
Soldag. insp.. Publicado em: 07/10/2019
-
5. Efeito do metal de adição na resistência ao desgaste por deslizamento de um aço estrutural soldado por GMAW
RESUMO O objetivo do presente trabalho foi avaliar o efeito do metal de adição na soldagem, e das microestruturas resultantes, na resistência ao desgaste de juntas soldadas de um aço estrutural ASTM A242, que possui resistência à corrosão atmosférica e é utilizado na fabricação de vagões destinados ao transporte de minério. As amostras foram sol
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Behaviors of Embrittlement and Softening in Heat Affected Zone of High Strength X90 Pipeline Steels
Abstract The embrittlement and softening behaviors in heat affected zone of X90 pipeline steel were studied, and the influence of weld thermal cycle on microstructure and mechanical properties were discussed by combining the effect of peak temperature on the phase transition point (Ar3). Results show that there are embrittlement and softening zones existed i
Soldag. insp.. Publicado em: 15/08/2019
-
7. Microstructural Evolution Due to One Thermal Cycle in a Superduplex Stainless Steel ASTM A890/A890M - Grade 6A in the As-Weld and Post-Weld Heat Treatment Conditions
During welding of the superduplex stainless steels are exposed to thermal cycles, allowing precipitation of deleterious phases as well as unbalance as the ferrite and austenite phases. This work analyzed the microstructural changes taking place on a plate ASTM A890/A890M - grade 6A steel submitted to arc welding one welding of pass conducted on a flat surfac
Mat. Res.. Publicado em: 08/08/2019
-
8. Nitretação a plasma da junta soldada do aço inoxidável super duplex SAF 2507
RESUMO Os aços inoxidáveis superduplex (AISD) apresentam em sua microestrutura as fases ferrita e austenita, de modo a conciliar boas propriedades mecânicas e de resistência à corrosão. Estes materiais possuem grande aplicação na indústria de extração de petróleo e na petroquímica. Quando estão sujeitos a estas aplicações, os dutos de AISD so
Matéria (Rio J.). Publicado em: 20/05/2019
-
9. Influência do Ciclo Térmico de Soldagem no Crescimento de Grão, nas Transformações Microestruturais e na Formação de MA na GGZAC de aço TMCP
Resumo A soldagem com elevado aporte térmico é uma das alternativas adotadas pelos estaleiros e fabricantes de torres eólicas para aumento da produtividade. No entanto, os ciclos térmicos gerados no processo podem provocar transformações microestruturais prejudiciais à tenacidade na zona afetada pelo calor, especialmente na região de grãos grosseiro
Soldag. insp.. Publicado em: 09/05/2019
-
10. Characterization of Phase Transformations and Microstructural Changes in an API 5CT L80 Steel Grade During Ni Alloy Laser Cladding
The superficial coatings in micro-alloyed steel pipes has been a pointed way to decrease the corrosion problems in oil and gas industry. However, little emphasis has been given to the substrate. The effects of the deposition method on the steel microstructure and properties are still not well described. In this context, this work studied the effect of Ni sup
Mat. Res.. Publicado em: 26/07/2018
-
11. Comportamiento frente a la corrosión de uniones soldadas por fricción agitación de AA7075-T651: Evaluación galvánica
ABSTRACT Friction Stir Welding (FSW) is a novel solid-phase welding process, which has proved to have a great potential for the realization of welded joints in materials with poor weldability such as heat-treatable aluminum alloys. The aerospace industry has incorporated this process for the manufacture of structural elements, using known high strength alloy
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Caracterización de soldaduras cuproaluminotérmica en cañerías de conducción para la protección catódica
ABSTRACT Copper-Aluminothermic weld is a process in which welder is generated by thermofusion. The necessary heat is obtained by the aluminum reducing effect above copper oxide, creating a high temperature exothermic reaction, in which melt and overheated copper is the filler material [1].This technique is used to joint rails in railway industry, in groundin
Matéria (Rio J.). Publicado em: 19/07/2018