Resistência à Corrosão de Juntas Dissimilares dos Aços AISI 316L e da Liga Inconel 718

AUTOR(ES)
FONTE

Soldag. insp.

DATA DE PUBLICAÇÃO

21/10/2019

RESUMO

Resumo A soldagem dissimilar (Dissimilar Metal Welds – DMWs), união de dois diferentes materiais metálicos, tem muitas aplicações industriais, com destaque para trocadores de calor nas usinas nucleares. Portanto, devem resistir à corrosão e a esforços mecânicos, entre outros requisitos. Neste trabalho foi abordada a susceptibilidade à corrosão da junta de união (feita por soldagem TIG – Tungsten Inert Gas), de forma autógena, de dois materiais distintos: Inconel 718 e o aço AISI 316L. Foram realizadas soldagens sob diferentes condições de aportes térmicos e correspondentes quantificações de fases utilizando microscopias e ferritoscopia e correlacionadas com o comportamento eletroquímico desta união em meios contendo cloretos. As análises microscópicas e ferromagnéticas mostraram que não houve formação da fase sigma durante a soldagem e a existência de altos teores de ferrita na região da zona fundida próxima a ZAC (zona afetada pelo calor) do aço 316L. Os ensaios eletroquímicos de corrosão mostram que as amostras nas diferentes regiões apresentaram a seguinte ordem decrescente de resistência à corrosão localizada: Amostra com maior aporte térmico (0,50 J/mm), na interface ZF/Inconel > Amostra com menor aporte térmico (0,33 J/mm) na interface ZF/Inconel > Amostra com menor aporte térmico, na interface ZF/316L > Amostra com maior aporte térmico, na interface ZF/316L> aço 316L. Finalmente, os diferentes aportes térmicos não provocaram diminuição da resistência à corrosão comparados ao aço 316L nas diferentes regiões de solda. Abstract Dissimilar Metal Welds (DMWs) union of two different metallic materials has many industrial applications, with emphasis for heat exchangers in nuclear power plants. Therefore, they must have enhanced corrosion and mechanical stress resistances, among other properties. The focus of this work is the analysis of the susceptibility to corrosion of the joint (made by TIG welding – Tungsten Inert Gas) of two different materials: Inconel 718 and AISI 316L stainless steel, without filler metal. Micrographic and ferroscopy analyses were performed for different heat input conditions and correlated with the electrochemical behavior of this joint in an environment containing chlorides. The metallographic and ferroscopy analyses did not reveal sigma phase formation during welding and showed high ferrite content in the region of the fusion zone near the HAZ (heat affected zone) of the 316L. The electrochemical corrosion tests showed that the samples in the different regions presented the following decreasing order of localized corrosion resistance: Sample with higher heat input (0.50 J / mm), at the interface ZF / Inconel > Sample with lower heat input (0.33 J / mm) at the interface ZF / Inconel > Sample with lower heat input, at interface ZF / 316L > Sample with higher heat input at interface ZF / 316L > 316L . Finally, the different heat inputs did not cause a significant decrease in the corrosion resistance in the different regions of the weld in relation to 316L.

Documentos Relacionados