Behaviors of Embrittlement and Softening in Heat Affected Zone of High Strength X90 Pipeline Steels
AUTOR(ES)
Gu, Yu
FONTE
Soldag. insp.
DATA DE PUBLICAÇÃO
15/08/2019
RESUMO
Abstract The embrittlement and softening behaviors in heat affected zone of X90 pipeline steel were studied, and the influence of weld thermal cycle on microstructure and mechanical properties were discussed by combining the effect of peak temperature on the phase transition point (Ar3). Results show that there are embrittlement and softening zones existed in heat affected zone of X90 pipeline steel. The peak temperature greatly affected the austenitizing and its grain size, thereby affected phase transition during cooling process. The embrittlement in critical heat affected zone at 750 °C was caused by brittle bainite and M /A islands formed during cooling, because little austenite was formed during heating. While, the embrittlement in coarse grain heat affected zone was caused by austenite grain coarsen, which transformed to the coarse bainite after cooling. The softening zone attributed to the polygonal ferrite and granular ferrite after cooling, which came from fine and ununiformed austenite formed during reheating process. Ar3 decreased with the increase of Cu, Cr or Mo content in steel, and the BF content in CGHAZ and GB and AF content in FGHAZ increased.
Documentos Relacionados
- The Influence of Isothermal Holding Times on Microstructural Evolution of X90 Linepipe Steel
- Welded Joints' Heat Affected Zone's Extension Prediction by Switching Welding Parameters
- Microstructural and Micromechanical Effects of Cold Roll-forming on High Strength Dual Phase Steels
- Application of ANFIS for modeling of microhardness of high strength low alloy (HSLA) steels in continuous cooling
- Study of Pipeline Steels with Acicular Ferrite Microstructure and Ferrite-bainite Dual-phase Microstructure