Foam
Mostrando 1-12 de 506 artigos, teses e dissertações.
-
1. Qual o melhor curativo para feridas exsudativas?
Uma revisão sistemática da Cochrane incluiu 42 Ensaios Clínicos Randomizados com pacientes portadores de ulcera venosa, destes 23 avaliaram o uso de hidrocoloide, 6 o uso de gel foam, 4 o uso de alginato, 6 hidrogel e 3 utilizaram uma miscelânea de curativos. Em nenhuma das comparações houve evidência de que um dos tipos de curativo fosse superior
. Publicado em: 12/06/2023
-
2. Qual o produto mais indicado para desbridamento em áreas de necrose em úlceras de pressão?
Existem no mercado vários produtos disponíveis para realização de desbridamento em úlceras de pressão com necrose. A seleção do produto baseia-se no estado da ferida: baixo exsudato (hidrogel + hidrocoloide); nível médio de exsudato (hidrofibra + hidrocoloide) e alta quantidade de exsudato (hidrofibra + espuma)
. Deve-se considerar também
Núcleo de Telessaúde Rio Grande do Sul. Publicado em: 12/06/2023
-
3. Bioactive SiO2-K2O-CaO-P2O5 glass-ceramic scaffold prepared using polyurethane foam template
Abstract A glass-ceramic in the SiO2-K2O-CaO-P2O5 quaternary system was prepared by substituting the Na2O component with K2O to avoid Na2Ca2Si3O9 formation upon thermal treatment since this phase decreases apatite formation kinetics on glass material. To form the glass-ceramic, a modified sol-gel method involving solution precipitation, followed by reagents
Cerâmica. Publicado em: 2023
-
4. Rapamycin and Paclitaxel Affect Human Aortic Smooth Muscle Cells-Derived Foam Cells Viability and Proliferation
Abstract Introduction: Drug-eluting stents (DES) coated with rapamycin or paclitaxel as antiproliferative substances significantly reduced the incidence of clinical restenosis and had fewer side effects after percutaneous coronary intervention. However, DES coated with rapamycin or paclitaxel still cause restenosis due to abnormal tissue growth which remain
Brazilian Journal of Cardiovascular Surgery. Publicado em: 2022
-
5. A Green Analytical Method Using Polyurethane Foam for The Extraction and Determination of Lauryl Ether Sulfate in Personal Care Hygiene Products
A green methodology was developed for the extraction and determination of lauryl ether sulfate in raw materials and commercial liquid soap and shower gel samples. The method avoids the use of organic solvents, offering a simple, cheap, and safe analysis. The methodology is based on the sorption of an ionic pair consisting of a cationic dye and an anionic sur
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
6. EFFECT OF SINGLE AND MULTIPLE SESSIONS OF SELF-MYOFASCIAL RELEASE: SYSTEMATIC REVIEW
RESUMO A autoliberação miofascial com rolo vem sendo utilizada como estratégia para acelerar o processo de recuperação. Esta revisão sistemática teve como objetivo investigar como uma sessão ou múltiplas sessões de autoliberação miofascial com rolo afetam a recuperação do desempenho dos atletas. A pesquisa foi realizada nas bases de dados PubMe
Revista Brasileira de Medicina do Esporte. Publicado em: 2022
-
7. Numerical simulation of wind-driven ventilation of a three-generic low-rise building in various geometrical configurations
Resumo A ventilação natural é a principal estratégia passiva para a obtenção do conforto térmico no interior das edificações, além de promover a renovação do ar ambiente, tornando-o mais saudável. Nas últimas décadas, a Dinâmica dos Fluidos Computacional mostrou-se uma ferramenta eficiente para estimar a ventilação natural. Diante disso, o
Ambiente Construído. Publicado em: 2022
-
8. Foam mat drying kinetics of jambolan and acerola mixed pulp
RESUMO A acerola e o jambolão são frutos com diversos compostos bioativos de origem fenólica e a composição de um produto elaborado com essas duas matérias-primas se afigura como um alimento com elevado potencial antioxidante e nutracêutico. Diante disso, este estudo foi realizado com o objetivo de avaliar a secagem em camada de espuma da polpa mista
Revista Brasileira de Engenharia Agrícola e Ambiental. Publicado em: 2022
-
9. Mathematical modeling of whey foam mat drying
ABSTRACT This study aimed to fit mathematical models to whey foam drying processes in different air temperature conditions, to determine the effective diffusion coefficient and to obtain the activation energy. For foam formation, 5.0% Emustab® was added to the serum in mass and subjected to stirring in a domestic shaker for 15 min. After, it was spread onto
Rev. Ceres. Publicado em: 2021-08
-
10. Evaluation of the properties of a foamed geopolymer developed with different types of metakaolin
Abstract The physical and mechanical properties of foamed geopolymers were determined. The geopolymers were made with two different metakaolins (from Metacaulim do Brasil - MB, and Pantano Grande/RS - MPG) as precursors, with NaOH and Na2SiO3 as activators, and with the addition of foam, which was produced with the foaming agent diethanolamide of coconut fat
Cerâmica. Publicado em: 2021-06
-
11. Buckwheat (Fagopyrum esculentum Moench) characterization as adjunct in beer brewing
Abstract Given the scenario of buckwheat cultivation in Brazil, the research was developed evaluating its insertion in beer production as adjunct. The samples of interest were made with 55% (w/w) barley malt and 45% (w/w) buckwheat malt (45BWM), referenced to 100% Pilsen malt beer (AM). The results showed that the buckwheat malt wort had a 96.27% dry base ex
Food Sci. Technol. Publicado em: 2021-06
-
12. USO DE UM SCANNER DE MESA E ESPUMA DE POLIURETANO PARA QUANTIFICAÇÃO DE FERRO TOTAL EM CÁPSULAS DE SUPLEMENTOS ALIMENTARES
In this work, an alternative and low-cost technique for the extraction and quantification of Fe (total) from food supplements by digital image analysis is shown. The method is based on the complexation of Fe ions in solution with the 8-hydroxyquinoline ligand, forming a colored complex that is extractable from aqueous solution to polyurethane foam, coloring
Quím. Nova. Publicado em: 2021-01