Fem
Mostrando 25-36 de 386 artigos, teses e dissertações.
-
25. Experimental-numerical Technique to Evaluate the Thickness of TiN Thin Film
In this study, the numerical analysis of instrumented indentation testing was combined with the experimental procedure to evaluate the mechanical properties and thickness of a titanium nitride (TiN) film deposited on titanium substrate (Ti) by plasma processing. TiN film thickness is an important parameter for the surface treatment industry. In numerical ana
Mat. Res.. Publicado em: 09/09/2019
-
26. Optimized design of RC deep beams based on performance metrics applied to strut and tie model and in-plane stress conditions
Abstract Deep beams do not behave according to classical beam theory. The nonlinearity of strain distribution within these elements requires application of strut and tie models (STM) or other alternatives to evaluate the complex stress field. Although the design of these elements is a common task for structural engineers, limited research is found on assessi
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
27. Dynamic Response Analysis of Geogrid Reinforced Embankment Supported by CFG Pile Structure During a High-Speed Train Operation
Abstract The performance of railroad structure has a tremendous influence on the safety and stable operation of high-speed trains. Strong vibrations and the degradation rate of the track are the main factors affecting the transport safety of a railroad built over a weak soil. Geogrid reinforced embankment supported by pile structure is a new efficient constr
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
28. Multi-scale representation of plastic deformation in fiber-reinforced materials: application to reinforced concrete
Abstract Here we present a multi-scale model to carry out the computation of brittle composite materials reinforced with fibers, and we show its application to standard reinforced concrete. The computation is carried out within an operator-split framework on the macro-scale, which allows for different failure mechanisms to develop in separate phases, as both
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
29. Thermo-mechanical analysis of mass concrete elements made of rubberized concrete
Resumo Neste estudo, foram avaliadas amostras de concreto massa com borracha (concreto emborrachado) para determinar se a adição de partículas de borracha aumentaria a resistência à fissuração devido a variações volumétricas de origem térmica, em comparação com um concreto de referência, sem borracha. Amostras dos concretos estudados foram inic
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
30. Analytical determination of the vibration frequencies and buckling loads of slender reinforced concrete towers
Abstract This study focused on improving the design of slender structures with reinforced concrete (RC) telecommunication towers as the main application. Analytical procedure based on Rayleigh’s method to compute the first natural vibration frequency and the critical buckling load was development. All the nonlinearities present in the system were considere
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
31. Simulação do Processo de Soldagem Elétrica por Centelhamento de um Aço para Trilhos Ferroviários. Parte 1: Análise de Tensões Residuais Via Elementos Finitos
Resumo Trilhos longos, soldados pelo processo Flash Butt Welding (FBW), são a realidade das ferrovias brasileiras de média e alta carga por eixo. Embora apresentem características desejáveis do ponto de vista do comportamento dinâmico da via, as soldas são regiões de descontinuidade estrutural e mecânica onde se originam tensões residuais, e que est
Soldag. insp.. Publicado em: 27/06/2019
-
32. Numerical approach of the steel-concrete bond behavior using pull-out models
ABSTRACT This paper deals with the analysis of monotonic loading behavior in pull-out tests. The main objective is to obtain a reliable numerical model to represent the steel-concrete bond behavior using previously obtained experimental results. The tests were performed in RILEM pull-out specimen using 10 mm steel bar and concrete with compressive strength o
Matéria (Rio J.). Publicado em: 10/06/2019
-
33. Numerical analysis of reinforced concrete asymmetric cross-section beams under oblique bending
Abstract The problem of symmetric cross-section beams under oblique bending is well known to professional designers and academy. In fact, symmetric elements make up most of the cross-sections defined in design. The case of the asymmetric cross-sections is, however, little discussed in literature, but is a particular problem, especially in bridge girder desig
REM, Int. Eng. J.. Publicado em: 2019-06
-
34. An Extended Linear Discontinuous Method for One-group Fixed Source Discrete Ordinates Problems with Isotropic Scattering in Slab Geometry
RESUMO Atualmente, a obtenção de uma solução numérica precisa para problemas de fonte fixa em ordenadas discretas é relevante em muitas áreas da engenharia e das ciências. Neste trabalho, estendemos o método híbrido Elementos Finitos-Espectro Nodal (FEM-SGF), que foi originalmente desenvolvido para resolver problemas de autovalores de difusão, par
TEMA (São Carlos). Publicado em: 30/05/2019
-
35. Effect of surface roughness and lubrication on the friction coefficient in deep drawing processes of aluminum alloy aa1100 with fem analysis 1
ABSTRACT Friction between the interface workpiece and tooling has considerable importance in sheet metal forming operations; an accurate description of the friction is necessary to analyze and design new workpieces and tooling. This work suggests a methodology to determine and evaluate the mean coefficient of friction (COF) using the Finite Element Method (F
Matéria (Rio J.). Publicado em: 20/05/2019
-
36. Staphylococcus aureus in tonsils of patients with recurrent tonsillitis: prevalence, susceptibility profile, and genotypic characterization
ABSTRACT Introduction: Bacterial tonsillitis is an upper respiratory tract infection that occurs primarily in children and adolescents. Staphylococcus aureus is one of the most frequent pathogens in the etiology of tonsillitis and its relevance is due to its antimicrobial resistance and persistence in the internal tissues of the tonsils. Tonsillectomy is in
Braz J Infect Dis. Publicado em: 20/05/2019