Fem
Mostrando 37-48 de 386 artigos, teses e dissertações.
-
37. ORGANIC MATTER AND SOIL FERTILITY IN DIFFERENT SUCCESSIONAL STAGES OF SEASONAL SEMIDECIDUAL FOREST
RESUMO O acúmulo e as transformações da matéria orgânica do solo são fundamentais para a manutenção e melhoria dos atributos químicos, físicos e biológicos do solo, e, consequentemente, para o funcionamento das florestas tropicais. O objetivo deste estudo foi avaliar a influência de florestas secundárias com diferentes estádios sucessionais na
Rev. Caatinga. Publicado em: 09/05/2019
-
38. Failure Probability, Stress Distribution and Fracture Analysis of Experimental Screw for Micro Conical Abutment
Resumo O objetivo deste estudo foi avaliar a probabilidade de falha de dois tipos de parafusos para pilar protético após a compressão e analisar a distribuição da tensão com o método dos elementos finitos. Sessenta (60) restaurações unitárias foram montadas em implantes de titânio (e-fix, A.S. Technology - Titanium Fix). Os grupos foram divididos
Braz. Dent. J.. Publicado em: 04/04/2019
-
39. Reduction of epistemic uncertainty of a crash box model - experimental and numerical investigations
Abstract The high prediction accuracy of FEM calculations is an important prerequisite for their growing use in the field of crash load cases for vehicle body design. Although the simulation accuracy of crash calculations for steel structures already is at a high standard, continuous improvements and a further development of the simulation models are crucial
Lat. Am. j. solids struct.. Publicado em: 21/03/2019
-
40. Behaviour of hollow circular section with multiple perforations under compression, flexure and torsion
Abstract Effect of the presence of perforations on thin structure has been extensively investigated for decades. Various perforation parameters were investigated in past studies. However, study on thin cylinder with multiple perforations has not been carried out. In searching for lighter structural members, the concept of perforated hollow section has been i
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
41. Contact phenomena modeling in biological structures on the example of the implant-bone
Abstract The work presents modeling of interface phenomena in biological structures. Selected ways of numerical modeling of phenomena at the boundary of two materials by means of FEM methods are discussed. The work focuses on phenomena related to biological structures and their mutual interactions. Using an example of an implant-bone system, various techniqu
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
42. Coupled numerical simulation of a tailings deposit by FEM
Abstract Researchers have found that a valuable alternative for predicting the mechanical behavior of landfill construction is numerical simulation based on the finite element method. The results of such a numerical simulation for a sandy tailings deposit from the iron mining coupling flow and deformation are presented herein. This study investigates the inf
REM, Int. Eng. J.. Publicado em: 2019-03
-
43. Fast Optimization of Tuned Mass-Spring Arrangement for Reduction of Acoustic Power Radiation of Submerged Ribbed Cylinder
Abstract In this paper, acoustic power radiation of a submerged finite length ribbed cylinder subject to a harmonic point load is minimized by a new fast scheme. For this purpose, two arrangements of non-uniformly distributed sequential point masses and mass springs attached on stiffening ribs of the cylinder are used to optimally reduce the acoustic power r
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
44. Influence of film coefficient during multicomponent diffusion – KCl/NaCl in biosolid for static and agitated system using 3D computational simulation
Abstract The influence of film coefficient formed during the diffusion of inorganic salts (NaCl and KCl) in biosolids was studied using a 3D computer modeling by Finite Elements Method (FEM) in COMSOL Multiphysics® software combined with SOM-type Artificial Neural Networks (ANN). Such tools have shown that the influence of the film formed in the biosolid/s
Food Sci. Technol. Publicado em: 07/01/2019
-
45. Influence of film coefficient during multicomponent diffusion – KCl/NaCl in biosolid for static and agitated system using 3D computational simulation
Abstract The influence of film coefficient formed during the diffusion of inorganic salts (NaCl and KCl) in biosolids was studied using a 3D computer modeling by Finite Elements Method (FEM) in COMSOL Multiphysics® software combined with SOM-type Artificial Neural Networks (ANN). Such tools have shown that the influence of the film formed in the biosolid/s
Food Sci. Technol. Publicado em: 20/12/2018
-
46. GFEM STABILIZATION TECHNIQUES APPLIED TO DYNAMIC ANALYSIS OF NON-UNIFORM SECTION BARS
Abstract The Finite Element Method (FEM), although widely used as an approximate solution method, has some limitations when applied in dynamic analysis. As the loads excite the high frequency and modes, the method may lose precision and accuracy. To improve the representation of these high-frequency modes, we can use the Generalized Finite Element Method (GF
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
47. Numerical experiments with the Generalized Finite Element Method based on a flat-top Partition of Unity
Abstract The Stable Generalized Finite Element Method (SGFEM) is essentially an improved version of the Generalized Finite Element Method (GFEM). Besides of retaining the good flexibility for constructing local enriched approximations, the SGFEM has the advantage of presenting much better conditioning than that of the conventional GFEM. Actually, bad conditi
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
48. Preface to the special issue of the International Symposium on Solid Mechanics (MecSol 2017)
Abstract The International Symposium on Solid Mechanics (MecSol) is a biennial conference which aims to provide a forum to discuss relevant issues associated with solid mechanics. The MecSol 2017 edition was held in the city of Joinville, Brazil, on 26-28 April 2017. Plenary lectures were delivered by researchers from five different countries. The main topic
Lat. Am. j. solids struct.. Publicado em: 22/10/2018