Fem
Mostrando 13-24 de 386 artigos, teses e dissertações.
-
13. GPU Finite Element Method Computation Strategy Without Mesh Coloring
Abstract A GPU-adapted Finite Element Method (A-FEM) implementation without using a mesh coloring strategy to avoid race conditions is presented. All the elements are simultaneously processed, and the local data is computed and consolidated into the device memory in a new adapted Coordinate Format data structure (a-COO). The comparison between the proposed s
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
14. Simultaneous Transfer of Na+, K+, and Fe2+ Ions During Salting of Precooked Mushroom (Agaricus bisporus): Mathematical Modeling, Optimization, and Experimental Validation
The champignon mushroom has no antinutritional factors that can affect iron bioavailability. It is considered a functional food and can provide health benefits by presenting bioactive components. The simultaneous transfer of Na+, K+ and Fe2+ in the pre-cooked mushroom (Agaricus bisporus) was modeled and simulated by the finite element method (FEM). The Biot
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
15. Two-dimensional beams in rectangular coordinates using the radial point interpolation method
Abstract The three-dimensional Theory of Elasticity equations lead to a complex solution for most problems in engineering. Therefore, the solutions are typically developed for reduced systems, usually symmetrical or two-dimensional. In this context, computational resources allow the reduction of these simplifications. The most recognized methods of algebraic
REM, Int. Eng. J.. Publicado em: 2020-03
-
16. Mathematical Modeling of the Transesterification Reaction by Finite Elements: Optimization of Kinetic Parameters Using the Simplex Sequential Method
The use of biodiesel as fuel has been presented as a viable alternative in the search for renewable energies. It can be produced from the transesterification reaction of vegetable oils with methanol in the presence of sodium or potassium hydroxide as catalysts. In the present research, the transesterification reaction of soybean oil was modeled considering t
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
17. Seismic resistance performance of a utility tunnel in saline soil foundation based on new cementitious composite materials
Abstract Because soluble salt in saline soil dissolves with water, utility tunnels built in saline soil foundation are more likely to damage due to by groundwater and earthquake. In this study, new cementitious composite materials were developed by using slag, building gypsum, quicklime, and magnesia. The unconfined compressive strengths of the saline soil s
Lat. Am. j. solids struct.. Publicado em: 10/01/2020
-
18. Large Displacement Static Analysis of Composite Elliptic Panels of Revolution having Variable Thickness and Resting on Winkler-Pasternak Elastic Foundation
Abstract Nonlinear static response of laminated composite Elliptic Panels of Revolution Structure(s) (EPRS) having variable thickness resting on Winkler-Pasternak (W-P) Elastic Foundation is investigated in this article. Generalized Differential Quadrature (GDQ) method is utilized to obtain the numerical solution of EPRS. The first-order shear deformation th
Lat. Am. j. solids struct.. Publicado em: 20/12/2019
-
19. Proposal of a new system to classify possible damages in piles partially reinforced considering the results of low strain integrity tests
Resumo Os ensaios PIT para avaliação de integridade em estacas têm um custo relativamente baixo, são de rápida execução e não destrutivos. Apesar dessas vantagens, as inúmeras variáveis envolvidas e a influência de fatores externos podem tornar a interpretação dos resultados complicada. Dentre elas, destacam-se as armaduras das estacas. Em estac
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
20. MODELING AND SIMULATION OF A VACUUM MEMBRANE DISTILLATION PLANT COUPLED WITH SOLAR ENERGY AND USING HELICAL HOLLOW FIBERS
Abstract This paper investigates the effect of operating conditions such as coil pitch, fiber diameter, distance between fiber and absorber internal wall and absorber diameter for a vacuum membrane installation coupled with solar energy and using helically coiled fiber to maximize the permeate flow rate. The model is based on a system of equations composed o
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
21. Avaliação dos processos de fratura em filmes finos através da simulação de ensaios de indentação com penetradores esféricos
RESUMO Recentes trabalhos propõem a utilização dos ensaios de indentação como uma ferramenta capaz de avaliar características mecânicas de filmes finos, assim como avaliar possíveis falhas em sistemas que conjugam filmes de alta dureza depositados em substratos metálicos em solicitações tribológicas. Entretanto, a implementação da técnica de i
Matéria (Rio J.). Publicado em: 25/11/2019
-
22. Impact responses of slender composite plates for bird-strike testing of fan blades
Abstract Bird-strike failure of fan blades is one of the basic challenges for the safety of aircraft engines. Simplified slender blade-like plates are always used to evaluate the impact-induced damage mechanism at design stage. One undesirable issue is the failure at the root of clamped slender plates, which cannot recover the real case of twisted blades. Fo
Lat. Am. j. solids struct.. Publicado em: 04/11/2019
-
23. New nonlinear solution of nearly incompressible hyperelastic FGM cylindrical shells with arbitrary variable thickness and non-uniform pressure based on perturbation theory
Abstract In this paper, nonlinear analysis of thick cylindrical shells with arbitrary variable thickness made of hyperelastic FGM with radially variation of material properties in nearly incompressible state under non-uniform pressure loading is presented. Thickness and pressure of the shell vary in axial direction by linear and/or nonlinear functions. The g
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
24. Effect of surface roughness and lubrication on the friction coefficient in deep drawing processes of aluminum alloy aa1100 with fem analysis
ABSTRACT Friction between the interface workpiece and tooling has considerable importance in sheet metal forming operations; an accurate description of the friction is necessary to analyze and design new workpieces and tooling. This work suggests a methodology to determine and evaluate the mean coefficient of friction (COF) using the Finite Element Method (F
Matéria (Rio J.). Publicado em: 16/09/2019