Cracking Process
Mostrando 1-12 de 77 artigos, teses e dissertações.
-
1. Influence of bottom ash and red mud additions on self-leveling underlayment properties
Abstract Self-levelling underlayments (SLUs) based on Portland cement (PC) are susceptible to cracking due to drying shrinkage. The present study evaluated the influence of binder contents on systems consisting of calcium aluminate cement (CAC), PC, and a source of calcium sulfate (C$), derived from the flue gas desulfurization process (FGD), on the mechanic
Cerâmica. Publicado em: 2022
-
2. Analysis of cracks and coating in iron ore pellets by digital image processing
Abstract The pelletizing process agglomerates ore fines previously considered as tailings and makes its application possible in the form of pellets. During the process, the pellets are subjected to various compressive forces and temperature changes, which cause ruptures in their surface. These ruptures (cracks) impair the performance of the pellets in the re
REM, Int. Eng. J.. Publicado em: 2020-09
-
3. PREPARATION AND SIMULATION OF THE ON-LINE SiO2/S COATING FOR COKING INHIBITION IN THE INDUSTRIAL CRACKING FURNACE
Abstract Coke formation inside radiant coils is one of the main problems during thermal cracking of hydrocarbons. The on-line preparation of the coating for coking inhibition is a promising technology because it provides more flexibility to the operators on site. The SiO2/S coating was prepared on the inner surface of coils in an 8-year-served GK-VI industri
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
4. Lateral loss of clay in the genesis of Luvisols in the Semi-Arid Depression of the Jequitinhonha Valley, Minas Gerais - Brazil
RESUMO Os solos da região semi-árida de Minas Gerais possuem pequena profundidade; consistência dura, muito dura ou mesmo extremamente dura quando seca e muito plástica e muito pegajosa quando úmida; estrutura colunar ou em blocos angulares e fendilhamento significativo ao longo do perfil no período seco, entretanto eles não foram profundamente estuda
Ciênc. agrotec.. Publicado em: 05/12/2019
-
5. Análise da influência do tipo de agregado miúdo nas características e dosagem de argamassas mistas
Resumo As argamassas de revestimento e assentamento de alvenaria com uso de areia artificial de britagem tem se tornado uma alternativa viável nos últimos anos, contudo têm-se grandes divergências quanto a preceitos de dosagem adequada para esses materiais. Diante disso, este trabalho objetiva estudar argamassas mistas de revestimento e assentamento de a
Ambient. constr.. Publicado em: 03/10/2019
-
6. Avaliação do grau de orientação de fibras de aço induzida na moldagem de elementos planos com concreto autoadensável
RESUMO O uso de concreto autoadensável (CAA) aliado ao concreto reforçado com fibras (CRF) tem sido objeto de várias pesquisas recentes. A combinação da fluidez do CAA com o uso de fibras aumenta a probabilidade de que, no processo de lançamento, seja possível causar orientação preferencial nas fibras, inclusive em elementos planos. Isto pode ser be
Matéria (Rio J.). Publicado em: 10/06/2019
-
7. Two-Dimensional Numerical Model of the Fracture Process in Steel Fibre Reinforced Concrete with the Continuum Strong Discontinuity Approach and Functional Data Analysis
Abstract This paper presents the formulation of a two-dimensional numeri-cal model able to describe the fracture process in structural mem-bers of steel fibre reinforced concrete (SFRC) from the volume ratio of the fibres and the mechanical properties of the compo-nents: a concrete matrix and a set of steel fibres with a random orientation. The relationship
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
8. Damage evaluation and failure mechanism analysis of steel tube confined reinforced-concrete columns by acoustic emission technology
Abstract As a new kind of composite structures and its advantages, the using of steel tube confined reinforced concrete (STCRC) columns have received increasing attention in civil engineering. Acoustic emission (AE) technique is applied to monitor the damage process of STCRC columns during an uniaxial compression test. The aim of this study is to investigate
Lat. Am. j. solids struct.. Publicado em: 29/11/2018
-
9. Análisis comparativo en la determinación de ferrita delta para aceros inoxidables austeníticos
ABSTRACT In the welding of austenitic stainless steels, the determination of delta ferrite (δ-ferrite) is very important to assess the susceptibility of weld metal to hot cracking, one of the major problems related to weldability, metallurgical and mechanical behavior of this type of steels. The determining δ-ferrite in the weld metal can be performed with
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Monitoreo mediante Emisión Acústica de vigas de hormigón de alta resistencia con y sin fibras expuesto a alta temperatura
ABSTRACT The addition of fibers to the cementitious matrix, giving rise to fiber-reinforced concrete, aims to improve the low ductility observed in concrete mechanical response under different load scenarios, particularly under direct tension. In this work, cracking and mechanical degradation processes of concrete elements using acoustic emission technique a
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Determinación de bajas concentraciones de hidrógeno en aleaciones de circonio utilizando radiografía de neutrones como técnica no destructiva
ABSTRACT Zircon base alloys (Zr) are used in the manufacture of fuel sheaths and structural components of power reactors because of their low neutron absorption. These alloys are susceptible to damage by hydrogen (H) because the concentration of the alloys can be increased locally in response to temperature or stress gradients. This causes a general degradat
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Effect of blisters and rims on radial hydride precipitation in fuel elements under dry storage conditions
ABSTRACT Hydrogen enters in Zry clads during fuel element life in service; when hydrogen exceeds the terminal solid solubility, circumferential hydrides are precipitated. In the presence of thermal gradients, produced for instance by oxide spallation, localized concentration of hydrides - known as blisters - can be formed. Due to the fact that zirconium hydr
Matéria (Rio J.). Publicado em: 19/07/2018