Cooling Rates
Mostrando 1-12 de 154 artigos, teses e dissertações.
-
1. EFFECT OF THE MIST MICRO-SPRAY TIME ON PHOTOSYNTHETIC SPATIAL HETEROGENEITY OF GRAPE CANOPY
ABSTRACT In grape, high temperatures and low humidity prolong midday depression of foliar photosynthesis and dramatically reduce fruit yield. In this study, we explored the effects of various mist micro-spray treatments on grape photosynthesis at a test site in Shanshan County (N, 42.91°; E, 90.30°), Turpan, Xinjiang, China. We tested four different mist m
Eng. Agríc.. Publicado em: 2021-02
-
2. Characterization of Austenite Decomposition in Steels with Different Chemical Concepts and High Potential to Manufacture Seamed Pipes for Oil and Gas Industry
This work presents the characterization of austenite decomposition kinetics in two steels during continuous cooling considering non-deformed austenite grains. Two different chemical concepts of steels were evaluated: low carbon - high manganese and a relatively new concept based on low carbon - low manganese - high niobium contents. Dilatometric experiments,
Mat. Res.. Publicado em: 21/10/2019
-
3. Proposição de um Modelo Empírico para Determinação das Temperaturas Críticas Durante Resfriamento Contínuo em Zonas Termicamente Afetadas de Aços IF Soldados pelo Processo TIG
Resumo Aços IF são amplamente empregados na indústria automobilística. No decorrer das aplicações de soldagem, eles passam pela transformação de fase austenita (γ) → ferrita (α) que ocorre por nucleação e crescimento de grão e, em condições isotérmicas, é descrita pela equação JMAK. Todavia, as transformações de fases pós-soldagem ac
Soldag. insp.. Publicado em: 23/09/2019
-
4. Experimental Thermal Analysis in Rotary Friction Welding of Dissimilar Materials
ABSTRACT: Rotary friction welding process (RFW) is one of the most used processes in the world for manufacturing bimetallic components that require high mechanical strength. All process occurs in solid state at temperatures below the melting point of the involved materials, having as the main bonding mechanisms the diffusion and mechanical mixture. The purpo
J. Aerosp. Technol. Manag.. Publicado em: 23/09/2019
-
5. Crystallization kinetics of poly (butylene adipate terephthalate) in biocomposite with coconut fiber
RESUMO Os parâmetros da cristalização a partir do fundido de um composto de fibras lignocelulósicas de côco dispersas em poli (butileno adipato tereftalato) (PBAT), uma matriz de copoliéster totalmente biodegradável, foi estudada por calorimetria exploratória diferencial (DSC). Os compostos de PBAT/fibra de côco com 10% e 20% de fibra foram preparad
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Effects of Macrosegregation and Microstructure on the Corrosion Resistance and Hardness of a Directionally Solidified Zn-5.0wt.%Mg Alloy
This study aims to analyze the influence of macrosegregation on microstructure evolution, and of microstructure length scale on the corrosion resistance of a Zn-5.0wt.%Mg alloy casting. The analyzed samples were taken along the length of castings unidirectionally solidified in unsteady state conditions of heat extraction. Microstructure characterization, mic
Mat. Res.. Publicado em: 05/09/2019
-
7. Effect of Nitrogen Addition to Shielding Gas on Cooling Rates and in the Microstructure of Thin Sheets of Duplex Stainless Steel Welded by Pulsed Gas Tungsten Arc Welding Process
The effect of the nitrogen content in the shielding gas and its effect on temperature distributions at the welded zone of thin sheets of duplex stainless steel have been evaluated. The duplex stainless steels have many features due to unique microstructural combination of austenite and ferrite grains. The phase balance can be easily shifted depending on the
Mat. Res.. Publicado em: 26/08/2019
-
8. Investigation of Thermal Parameters Effects on the Microstructure, Microhardness and Microsegregation of Cu-Sn alloy Directionally Solidified under Transient Heat Flow Conditions
The microstructure and mechanical properties of cast materials are strongly dependent on the thermal history during solidification process. The global casting industry has faced major challenges, i.e., customers increasingly demand completely finished cast parts as well as complexity of casting alloys are rising. Therefore, the previous knowledge the solidif
Mat. Res.. Publicado em: 19/08/2019
-
9. Influência do Regime Transiente Sobre a Microdureza e Microestrutura nos Aços ASTM-A36 e SAE-1045 Soldados pelo Processo MAG
Resumo O regime quase-estacionário pode não ser alcançado em soldagens a arco elétrico de peças de pequenas dimensões e/ou de materiais de maior condutividade térmica. Entretanto, o regime transiente sempre ocorrerá no início e no final da soldagem. Neste regime, a variação do fluxo de energia via calor pode promover variações microestruturais e
Soldag. insp.. Publicado em: 08/08/2019
-
10. Efeito da taxa de resfriamento sobre a formação de martensita em um aço inoxidável ferrítico com 11 %Cr e baixos teores de intersticiais
RESUMO Estudou-se o efeito da taxa de resfriamento sobre a cinética de formação da martensita e sua evolução microestrutural em um aço inoxidável ferrítico com 0,011 %C - 11,1 %Cr - 0,013 N, usando a técnica de dilatometria e a microscopia ótica. Amostras foram austenitizadas a 1000°C por um minuto, seguida de resfriamento sob várias taxas até a
Matéria (Rio J.). Publicado em: 20/05/2019
-
11. Efeito da Taxa de Resfriamento na Liga Ni80Cu20 via Dinâmica Molecular
RESUMO A simulação em Dinâmica Molecular (MD) é uma poderosa ferramenta para estudo de ligas amorfas nanométricas. Neste artigo, a MD foi empregada para o estudo da liga Ni80Cu20. As simulações foram realizadas com o código livre LAMMPS, em um sistema contendo 2.000 átomos com interação atômica dada pelo potencial de Finnis-Sinclair (EAM-FS). O a
Matéria (Rio J.). Publicado em: 20/05/2019
-
12. Non-isothermal melt crystallization kinetics of poly(3-hydroxybutyrate), poly(butylene adipate-co-terephthalate) and its mixture
Abstract Nonisothermal crystallization and melting of the biodegradable thermoplastics poly(3-hydroxybutyrate) (PHB), poly(butylene adipate-co-terephthalate) (PBAT), and a 1:1 PHB/PBAT blend were investigated by differential scanning calorimetry (DSC) over an extensive range of heating/cooling rates (2 to 64°C/min). The different phase transition behavior
Polímeros. Publicado em: 18/03/2019