Composite Material
Mostrando 37-48 de 771 artigos, teses e dissertações.
-
37. Caracterização de partículas de açaí visando seu potencial uso na construção civil
RESUMO Na Amazônia, o principal potencial de contribuição para os Objetivos de Desenvolvimento Sustentável (ODS), está no aproveitamento de resíduos da agroindústria para uso na construção civil, como alternativa de novos materiais sustentáveis. Neste contexto, objetivou-se com este trabalho avaliar o potencial uso de partículas de resíduos de a�
Matéria (Rio J.). Publicado em: 16/09/2019
-
38. Influence of the incorporation of triclosan methacrylate on the physical properties and antibacterial activity of resin composite
Abstract The incorporation of antimicrobials in the composites as an attempt to reduce bacterial adhesion without jeopardizing mechanical properties is a challenge for Dentistry. Objective: To evaluate the bacterial adhesion and physical properties of a composite containing the methacrylate triclosan- derivative monomer (TM). Methodology: TM was synthesize
J. Appl. Oral Sci.. Publicado em: 09/09/2019
-
39. The Ability of Biodentine™ of Guided Tissue Remineralization (GTR): Analysis Using SEM, EDX and TEM
Abstract Objective: To analyze the Biodentine™ capability in guided tissue remineralization. Material and Methods: Four premolar with two cavities per tooth of 3 mm depth were demineralized with EDTA 17% in shaking incubator at 37ºC temperature. After 7 days, the sample were washed with aquabidest then were soaked in 20 ml NaCl 1 M (pH 7.0) at 25ºC tem
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 02/09/2019
-
40. Iron oxide/titania composites for radar absorbing material (RAM) applications
Resumo Compósitos de óxido de ferro/titânia foram sintetizados pelo método de precipitação. A quantidade de óxido de ferro foi variada nos compósitos. Fase única (anatásio) foi obtida para a fração em massa de 0-20% e três fases (anatásio, magnetita e hematita) foram encontradas para as frações de 30% e 40% de óxido de ferro. O tamanho de cr
Cerâmica. Publicado em: 15/08/2019
-
41. Chemical conversion of a solid body of the composite gypsum/polyhydroxybutyrate in hydroxyapatite/polyhydroxybutyrate
Resumo A transformação do gesso em hidroxiapatita permite agregar valor a essa matéria-prima, pois a cerâmica obtida possui alto valor comercial em relação ao gesso, enquanto o polímero acrescenta propriedades de biocompatibilidade e bioatividade ao biocompósito. Assim, compósitos de hidroxiapatita/poli-hidroxibutirato foram preparados a partir do g
Cerâmica. Publicado em: 15/08/2019
-
42. Evaluation of the resistance of trussed slabs with steel formwork in cold formed U profile
Abstract In the last decades, the modernization in structural engineering has increased the use of steel-concrete composite and hybrid systems for slabs, when the adherence in the interface of the materials is present or not, respectively. In addition to the traditional steel deck, a similar solution for precast trussed slabs has been used for small construc
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
43. Thermal, dielectric and catalytic behavior of palladium doped PVC films
Abstract The present paper discusses the aspects of synthesizing palladium (Pd) doped (Pd+2 and Pd0) poly(vinyl chloride) (PVC) using simple solution cast technique. The Pd loading to PVC was altered from 2.5% to 10.0% and the material properties were studied using UV-Visible spectroscopy (UV-Vis), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscop
Polímeros. Publicado em: 04/07/2019
-
44. Influence of grinding on the pozzolanic activity of granite residue
Abstract This study explores the potential of the granite residue to be applied as a supplementary cementitious material. Furthermore, the efficiency of grinding methods in the improvement of the residue reactivity was also evaluated. The granite residue was collected in a facility located in Brazil and used as a Portland cement replacement with a substituti
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
45. Analysis of the densification of a composite obtained by sintering process of aluminum bronze powders with different carbides
Abstract Aluminum bronze alloy is applied in environments that require materials of high mechanical resistance and wear, such as marine, oil & gas and aerospace ones. This study analyzes the densification of composites based on aluminum bronze with additions of the vanadium (VC) and niobium (NbC) carbides, and the influence of these carbides in the milling e
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
46. Study on impact of fiber hybridization in material properties of engineered cementitious composites
ABSTRATO Compósito Cimentício Projetado (ECC) é um tipo de compósitos cimentícios reforçados com fibras de alto desempenho melhorados com bom comportamento de tração, compressão e flexão. O ECC é conhecido por seu comportamento de endurecimento de tensão sob tensão e tem sido cada vez mais aplicado na prática de engenharia. O processo de adicio
Matéria (Rio J.). Publicado em: 10/06/2019
-
47. Hydrothermal Synthesis to Water-stable Luminescent Carbon Dots from Acerola Fruit for Photoluminescent Composites Preparation and its Application as Sensors
Carbon dots (C-dots) possess the attractive properties of high stability, low toxicity, good water solubility, simple synthetic routes as well as size and excitation-dependent photoluminescence (PL).The aim of this work was to synthesize photoluminescent C-dots by hydrothermal method using acerola fruit (Malpighiaemarginata) as a row material, since this fru
Mat. Res.. Publicado em: 06/06/2019
-
48. Desempenho balístico de estruturas multicamadas à base de alumina/epóxi
Resumo Alumina é comumente utilizada em blindagens compostas. Apresenta baixa tenacidade à fratura e esta propriedade está relacionada à resistência a múltiplos disparos. Com o intuito de melhorar a durabilidade em campo uma alternativa seria utilizar cerâmicas multicamadas. Neste estudo foi avaliado o desempenho balístico de estruturas multicamadas
Cerâmica. Publicado em: 06/06/2019