Composite Material
Mostrando 25-36 de 771 artigos, teses e dissertações.
-
25. Effect of Different Fiber Reinforcement Strategies on the Fracture Strength of Composite Resin Restored Endodontically Treated Premolars
Abstract Objective: To compare the effect of three different fiber reinforcement strategies on the fracture strength of composite resin restored endodontically treated premolars. Material and Methods: Seventy-two sound human premolars extracted for orthodontic reasons were divided into 6 groups (n=12) after endodontic treatment. Group 1: intact teeth (posi
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 31/10/2019
-
26. Silica/Titania Graphite Composite Modified with Chitosan and Tyrosinase Employed as a Sensitive Biosensor for Phenolic Compounds
A mesoporous, high surface area and conductive silica/titania graphite composite modified with chitosan and functionalized with tyrosinase was prepared. The composite was obtained by the sol-gel method and the surface of the resultant material was modified with chitosan solutions containing 5, 10 and 15% by mass. The textural characterization showed that eve
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
27. A New Electrochemical Platform Based on a Polyurethane Composite Electrode Modified with Magnetic Nanoparticles Coated with Molecularly Imprinted Polymer for the Determination of Estradiol Valerate in Different Matrices
A polyurethane composite electrode modified with magnetic nanoparticles (mag; Fe3O4) coated with molecularly imprinted polymers (MIPs) was developed for the electrochemical determination of estradiol valerate. Chemical and morphological analyses of the mag-MIP were performed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (E
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
28. Development of an Analytical Method for the Determination of Metals in Chicken Breast by Microwave Induced Plasma Optical Emission Spectrometry (MIP-OES)
An analytical method for the determination of Al, Ca, Cd, Cr, Cu, Fe, Hg, K, Mg, Na and Zn in breast of conventional, country and Christmas chicken and turkey samples using microwave induced plasma optical emission spectrometry (MIP-OES) technique was developed. Samples were decomposed in a digester block with a reflux system under conditions optimized using
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
29. Frequency Selective Surface Properties of Microwave New Absorbing Porous Carbon Materials Embedded in Epoxy Resin
In this manuscript, the electromagnetic wave absorption properties of sustainable porous carbon composites were evaluated over the X-band frequency range (8.2 - 12.4 GHz). The porous carbon material was made from the byproduct of cellulose production and was used as additive on the development of radar absorbing material (RAM) composites. These porous carbon
Mat. Res.. Publicado em: 21/10/2019
-
30. Gold Nanoparticles and [PEDOT-Poly(D,L-Lactic Acid)] Composite: Synthesis, Characterization and Application to H2O2 Sensing
Biocompatible electrochemical devices are challenging to develop due to the toxicity of many advanced electrode materials and the difficulty to degrade the discarded material. Few recent advances were made in the synthesis of conducting biodegradable composites of polymers for electrode materials. In this article we describe the synthesis of two new inorgani
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
31. Development of Sustainable Eggshell Waste-Polyester Resin Composite Material for Using as Artificial Rock
The aim of this work was to study the possibility of reuse of chicken eggshell waste produced in the food manufacturing industry for processing of sustainable eggshell waste-polyester resin composite materials for use as artificial carbonaceous rocks. For this purpose, composite specimens with different eggshell waste-polyester resin compositions in differen
Mat. Res.. Publicado em: 14/10/2019
-
32. A randomized, prospective clinical study evaluating effectiveness of a bulk-fill composite resin, a conventional composite resin and a reinforced glass ionomer in Class II cavities: one-year results
Abstract Bulk-fill restorative materials such as bulk-fill composite resins and high viscous glass ionomer cements have become very popular materials in operative dentistry because their application is easy and time-saving. Objectives: The aim of this clinical study was to evaluate the clinical performance of a highly viscous reinforced glass ionomer materi
J. Appl. Oral Sci.. Publicado em: 07/10/2019
-
33. Modification of the Crystalline Structure of ZnO Nanoparticles Embedded Within a SiO2 Matrix due to Thermal Stress Effects
Self-assembled nanocrystals of ZnO were embedded within a SiO2 matrix by a sequential deposit using reactive R.F. sputtering. The ZnO nanoparticles (NP’s) were obtained by depositing a very thin layer (~20 nm) of Zn on the bottom of the valleys of a first SiO2 rough surface and then covered by another SiO2 layer at 500 ºC. The stress produced, due to the
Mat. Res.. Publicado em: 23/09/2019
-
34. Estudo da substituição do nylon por compósito de polipropileno com fibra de vidro
RESUMO Peças fabricadas com polímeros de alto desempenho têm sido substituídas por materiais similares, sendo produzidas com uma composição de polipropileno (PP), que tem um custo mais baixo. Uma das composições mais comumente utilizadas é a junção do polipropileno com fibras, resultando na formação de um novo material, com características dife
Matéria (Rio J.). Publicado em: 16/09/2019
-
35. Caracterização do composto de CuCr2O4 obtido pelo método da reação de combustão em solução
RESUMO O material CuCr2O4 foi sintetizado pela reação de combustão em solução e tratado termicamente na faixa de 600 à 1100oC, afim de verificar a evolução das fases. O composto foi carcterizado estrutural e morfologicamente por meio das técnicas de Difração de Raios X (DRX), refinamentos pelo método de Rietveld, Microscopia Eletrônica de Varred
Matéria (Rio J.). Publicado em: 16/09/2019
-
36. Aço de alta dureza para aplicação balística: propriedades mecânicas
RESUMO Blindagens balísticas são projetadas a resistir determinadas ameaças, que dependem da aplicação. Estas ameaças podem ser geradas por projéteis de armas de fogo ou estilhaços provenientes de explosões com diferentes energias cinéticas. Os materiais normalmente utilizados para este propósito são metálicos, não metálicos e compósitos, sen
Matéria (Rio J.). Publicado em: 16/09/2019