Chemical conversion of a solid body of the composite gypsum/polyhydroxybutyrate in hydroxyapatite/polyhydroxybutyrate
AUTOR(ES)
Barbosa, A. A.
FONTE
Cerâmica
DATA DE PUBLICAÇÃO
15/08/2019
RESUMO
Resumo A transformação do gesso em hidroxiapatita permite agregar valor a essa matéria-prima, pois a cerâmica obtida possui alto valor comercial em relação ao gesso, enquanto o polímero acrescenta propriedades de biocompatibilidade e bioatividade ao biocompósito. Assim, compósitos de hidroxiapatita/poli-hidroxibutirato foram preparados a partir do gesso/poli-hidroxibutirato, usando uma proporção em massa de 10% do polímero. O material foi obtido por meio de uma conversão química realizada em solução de hidrogenofosfato de amônio (0,5 mol.L-1) e meio alcalino (hidróxido de amônio 6,0 mol.L-1) para controle de pH. A reação ocorreu a 100 °C em diferentes tempos de teste. Análises de espectroscopia no infravermelho mostraram grupos funcionais característicos de hidroxiapatita após 36 h de reação; além disso, o biomaterial foi identificado como a fase majoritária em difratogramas de raios X. Microscopia eletrônica de varredura dos materiais antes e após a conversão mostrou uma clara mudança em suas morfologias, indicando o sucesso da síntese.Abstract The transformation of the gypsum into hydroxyapatite allows added value to this raw material, because the ceramic obtained has a high commercial value in relation to gypsum, while the polymer adds biocompatibility and bioactivity properties to the biocomposite. Thus, hydroxyapatite/polyhydroxybutyrate composites were prepared from the gypsum/polyhydroxybutyrate, using a 10% mass ratio of the polymer. The material was obtained by means of a chemical conversion carried out in a solution of ammonium hydrogen phosphate (0.5 mol.L-1) and alkaline medium (ammonium hydroxide 6.0 mol.L-1) for pH control. The reaction occurred at 100 °C at different test times. Analyzes of infrared spectroscopy showed functional groups characteristic of hydroxyapatite after 36 h of reaction; in addition, the biomaterial was identified as the major phase in X-ray diffraction patterns. Scanning electron microscopy of the materials before and after conversion showed a clear change in their morphologies, indicating the success of the synthesis.
Documentos Relacionados
- Biocompatibility, osteointegration, osteoconduction, and biodegradation of a hydroxyapatite-polyhydroxybutyrate composite
- The production of hydroxyapatite prototypes from solid bodies of gypsum/polyvinyl alcohol composites
- Compósitos de hidroxiapatita e polihidroxibutirato em defeitos ósseos experimentais na ulna de coelhos
- Thermal and microestructural characterization of epoxy-infiltrated hydroxyapatite composite
- Thermal and microestructural characterization of epoxy-infiltrated hydroxyapatite composite