Ac Dc Converter
Mostrando 1-12 de 12 artigos, teses e dissertações.
-
1. Análise, projeto e implementação de um conversor com ampla faixa de tensão de entrada aplicado a iluminação de estado sólido
Currently research has pointed to LEDs as the technology more efficient and durable to be used in lighting, however, it requires a static converter in order to control the electrical current flowing through the LED lamp. In this context, this work present the analysis, design and implementation of a DC/DC converter with wide input voltage range called Boost-
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/05/2012
-
2. CONTROLE NÃO LINEAR DE UM PRÃ-REGULADOR ISOLADO COM PFC E ACOPLAMENTO AUXILIAR / âNonlinear control of a high frequency isolated pre-regulator with PFC and auxiliary coupling
Este trabalho propÃe o estudo de uma nova topologia, com dois estÃgios, de um conversor estÃtico, onde existe um fluxo de potÃncia auxiliar com o objetivo de aumentar o rendimento do sistema. O primeiro estÃgio à um conversor CA-CC com correÃÃo do fator de potÃncia (PFC) e o segundo estÃgio à um conversor CC-CC isolado em alta frequÃncia. Os dois
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/08/2011
-
3. ANÁLISE ESTÁTICA NORMALIZADA E MODELAGEM DE PEQUENOS SINAIS DO CONVERSOR CLASSE-E UTILIZANDO TRANSFORMADORES PIEZOELÉTRICOS.
Os Transformadores Piezoelétricos (PTs) permitem o projeto de aplicações promissoras para fontes de alimentação até 100W, melhorando a eficiência, reduzindo o tamanho, facilitando a obtenção de grandes relações de transformação, além de proporcionar alta imunidade contra ruídos eletromagnéticos e interferências. Os PTs apresentam modelo elé
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/08/2011
-
4. Sistema de controle digital com rápida resposta transitória para um retificador monofásico meia-ponte / Digital control system for a single-phase half-bridge rectifier with fast dynamic response
Esta Dissertação de Mestrado propõe um sistema de controle digital para um retificador meiaponte monofásico, que integra o estágio de entrada de uma UPS não isolada de dupla conversão monofásica. O sistema de controle proposto tem uma malha de corrente interna e duas malhas de tensão externas para manter o fator de potência unitário e regular a te
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/05/2011
-
5. Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico
This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technologi
Publicado em: 2010
-
6. Inversor monofásico sincronizado para a conexão de um gerador eólico à rede elétrica : estudo, projeto e implementação
The aims of this work are the study, design and implementation of a dc/ac converter for the connection of a wind power generator to the electric grid. It makes use of a single-phase inverter, with three-level PWM modulation, connected to the grid through a low frequency transformer. Three distinct variables are controlled in the converter: the output current
Publicado em: 2009
-
7. ADVANCED USE OF THE EXCEEDING POWER PLANT CAPACITY OF HVDC TRANSMISSION SYSTEMS TO PRODUCE OXYGEN AND HYDROGEN / UTILIZAÇÃO AVANÇADA DA CAPACIDADE EXCEDENTE DE SISTEMAS DE TRANSMISSÃO CCAT PARA PRODUÇÃO DE OXIGÊNIO E HIDROGÊNIO
This PhD thesis discusses the use of the power plant capacity in HVDC transmission systems during inactive periods of the main converters to feed local loads, aiming at a better AC power quality and DC transmission. The power available in the inactive periods is drained by an auxiliary converter connected in parallel with the HVDC converter. This energy can
Publicado em: 2008
-
8. MÃtodos de sincronizaÃÃo de conversores em sistemas de geraÃÃo distribuÃda / Converter synchronization methods for distributed generators systems
The use of frequency converters DC/AC to integrate renewable energy as distributed generation is becoming more common. In such applications, the synchronization with the voltage vector is fundamental to control the converters, particularly considering the new requirements on Low Voltage Ride Through demanded from the distributed generation. This work propose
Publicado em: 2008
-
9. MODELING, DESIGN AND IMPLEMENTATION OF AN INSULATED POWER FACTOR CORRECTED SINGLE-STAGE CONVERTER / MODELAGEM, PROJETO E IMPLEMENTAÇÃO DE UM CONVERSOR ISOLADO COM UM ÚNICO ESTÁGIO E CORREÇÃO DO FATOR DE POTÊNCIA.
Esta Dissertação de Mestrado apresenta uma nova análise, modelagem e metodologia de projeto de um conversor CA-CC isolado com um único estágio e correção do fator de potência. Inicialmente, é apresentado o princípio de operação do conversor em estudo propiciando um melhor entendimento do funcionamento do mesmo. Assim, baseada na nova análise, s�
Publicado em: 2008
-
10. INTERACTION BETWEEN LOW-RIPPLE SWITCHED CONVERTERS AND FUEL CEL LS / INTERAÇÃO ENTRE CONVERSORES CHAVEADOS COM BAIXA ONDULAÇÃO E CÉLULAS DE COMBUSTÍVEL
This dissertation discusses the interaction between fuel cells and the DC-DC converter just connected across its terminals. For that, it presents a modified algorithm to represent the dynamic behavior of fuel cell stacks as much the current ripple effects from power converters on such cells. PEM type fuel cells (Proton Exchange Membrane) are studied to get a
Publicado em: 2007
-
11. Desenvolvimento de conversor comutado em baixa frequencia para aplicação em sistemas de geração distribuida baseados em celulas a combustivel / Development of a low-frequency commutation converter for distributed generation system based on fuel cells
The connection of distributed power sources with the utility grid generally needs an electronic power converter for processing the locally generated power and injecting current into the system. This work presents a system intended to low-power distributed generation composed by a DC primary source, as a fuel cell. A boost converter connects the supply to an
Publicado em: 2006
-
12. Sintese e aplicações de indutancias negativas
This doctorate dissertation presents methods for emulating negative inductance, as well as their applications and stability analysis. Such non-natural behavior is analyzed based on mathematical modeling, circuit simulations and experimental results. Previously presented synthesis methods, the VAPAR and the BVI are described, and a new strategy, called SDR is
Publicado em: 2002