Boundary Elements
Mostrando 1-12 de 287 artigos, teses e dissertações.
-
1. Fuzzy Boundary for Beams Vibrations in Vehicles
ABSTRACT This work aims to study the transversal motion of a car’s chassis, modeled by a beam and supported at its ends by two sets of spring-damper elements. A finite differences method is utilized along with Robin boundary conditions to solve the mathematical modeling. The constants of the boundary conditions are modeled by a fuzzy parameter obtained thr
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
2. Numerical and experimental evaluation of the thermally stratified atmospheric boundary layer in wind tunnels
Abstract The atmospheric boundary layer (ABL) flow occurs due to the interaction between the Earth’s surface and atmosphere, and it usually happens under thermal stratification. Therefore, in order to emulate this phenomenon, atmospheric wind tunnels need appropriate devices, such as spires and cubical roughness elements, at the entrance of the wind tunnel
REM, Int. Eng. J.. Publicado em: 2021-01
-
3. Trabalho ubíquo na pós-graduação stricto sensu em educação: in/extensificação e multitarefa
RESUMO O trabalho docente universitário mediado por tecnologias digitais e móveis ganha cada vez mais contornos de atividade ubíqua, com suas paradoxais repercussões que afetam dois elementos comuns a todas as atividades humanas: tempo e espaço. Desbordamentos de fronteiras entre público e privado e a incorporação do modus operandi da reestruturaçã
Rev. Bras. Educ.. Publicado em: 25/04/2019
-
4. O programa de Hölderlin para Iena: Ideias estéticas além de Kant e Schiller
Resumo A concepção filosófica de Hölderlin compõe-se de duas percepções fundamentais: a indivisibilidade do racional e do sensível presente na ideia platônica de beleza, e a compreensão, de fundo espinosista, de que a unidade assim pensada apreende-se como diferenciada em si mesma. O presente artigo aborda a primeira percepção. Em fins de 1794, H
Pandaemonium ger.. Publicado em: 2019-04
-
5. Contact phenomena modeling in biological structures on the example of the implant-bone
Abstract The work presents modeling of interface phenomena in biological structures. Selected ways of numerical modeling of phenomena at the boundary of two materials by means of FEM methods are discussed. The work focuses on phenomena related to biological structures and their mutual interactions. Using an example of an implant-bone system, various techniqu
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
6. Strut-and-tie models for linear and nonlinear behavior of concrete based on topological evolutionary structure optimization (ESO)
Resumo A busca por sistemas resistentes representativos para estrutura de concreto requer profundo conhecimento sobre seu comportamento mecânico. Os modelos de bielas e tirantes são procedimentos clássicos utilizados no dimensionamento do concreto armado onde existem concentrações de tensão, as chamadas regiões descontínuas da estrutura. No entanto,
Rev. IBRACON Estrut. Mater.. Publicado em: 2019-02
-
7. A Model Updating Method for Plate Elements Using Particle Swarm Optimization (PSO), Modeling the Boundary Flexibility, Including Uncertainties on Material and Dimensional Properties
Abstract It is a well-known fact that, in a real engineering situation, fixtures are not ideally stiff, so numerical simulations using them are unlikely to present results that are consistent with the experimental ones. The present paper intends to describe a model updating methodology inserting translational and rotational springs in order to better represe
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
8. Sensitivity analysis of 3D frictional contact with BEM using complex-step differentiation
Abstract This paper presents a study of the complex step differentiation method applied to a parameter sensitivity analysis for 3D elastic contact problem. The analysis is performed with the Boundary Element Method (BEM) using discontinuous elements and the Generalized Newton Method with line search (GNMls). A standard BEM implementation is used and the cont
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
9. Numerical analysis of truss systems with stiffened flattened end-bars
Abstract Circular hollow sections are usually used in long-span roof truss systems. One of the typology for connecting elements in such structures involves the flattening of bar ends. This article presents the numerical analysis of a plane truss composed of circular hollow sections, in which diagonal bars have flattened ends. In this sense, a new flattening
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
10. Thermal analysis of steel-concrete composite cross sections via CS-ASA/FA
Abstract When exposed to high temperatures, such as in a fire situation, the physical and resistance characteristics of the materials employed in the structure deteriorate as the temperature increases. This fact promotes a considerable loss in the bearing capacity and stiffness of the structural system. The verification of a structure exposed to fire depends
REM, Int. Eng. J.. Publicado em: 2018-04
-
11. Wall function treatment for bubbly boundary layers at low void fractions
Abstract The present work investigates the role of different treatments of the lower boundary condition on the numerical prediction of bubbly flows. Two different wall function formulations are tested against experimental data obtained for bubbly boundary layers: (i) a new analytical solution derived through asymptotic techniques and (ii) the previous formul
An. Acad. Bras. Ciênc.. Publicado em: 2018-03
-
12. The Rio Pardo salient, northern Araçuaí orogen: an example of a complex basin-controlled fold-thrust belt curve
ABSTRACT: The Rio Pardo salient, the large antitaxial curve described by the Araçuaí fold-and-thrust belt along the southeastern edge of the São Francisco craton, is one of the most prominent and one of the least studied features of the Brasiliano Araçuaí-West Congo orogenic system (AWCO). In addition to the Archean/Paleoproterozoic basement, the salien
Braz. J. Geol.. Publicado em: 2018-01