Boundary Elements
Mostrando 13-24 de 287 artigos, teses e dissertações.
-
13. INNOVATION IN THE BUSINESS MODEL FROM THE PERSPECTIVE OF DYNAMIC CAPABILITIES: BEMATECH’S CASE
ABSTRACT Purpose: The literature on business models deals with creation and capture of the value obtained through innovation as elements necessary for the continuity of the companies. The concepts inherent in business models demonstrate the operation logics s for the creation of value. To verify how the value creation process occurs, a case study has been c
RAM, Rev. Adm. Mackenzie. Publicado em: 2017-12
-
14. Analog Models of Flanking Structures and a Natural Example in the Quadrilátero Ferrífero, Minas Gerais
ABSTRACT The aim of this study is to present analog models of flanking structures and to analyze the Fábrica Nova synform, Quadrilátero Ferrífero, Minas Gerais, from a geometric point of view. We set up seven models using a linear viscous silicone and produced flanking structures with a shear velocity of 2 cm h-1. At different initial orientations with re
An. Acad. Bras. Ciênc.. Publicado em: 31/07/2017
-
15. Parametric Modal Dynamic Analysis of Steel-Concrete Composite Beams with Deformable Shear Connection
Abstract Composite structural elements of steel-concrete began to be used only in 1960 after the development of methods and constructive dispositions that ensured the functionality of these two materials together. In order to verify the importance of the participation of the axial mode in the frequency spectrum of the free vibration problem in composite beam
Lat. Am. j. solids struct.. Publicado em: 2017-02
-
16. A C1 Beam Element Based on Overhauser Interpolation
Abstract A new C1 element is proposed to model Euler-Bernoulli beams in one and two-dimensional problems. The proposed formulation assures C1 continuity requirement without the use of rotational degrees of freedom, used in traditional elements, through the use of an Overhauser interpolation scheme for bending displacements. The principle of virtual displacem
Lat. Am. j. solids struct.. Publicado em: 2017-01
-
17. Mechanical Behavior of Nano Structures Using Atomic-Scale Finite Element Method (AFEM)
Abstract This work presents a detailed description of the formulation and implementation of the Atomistic Finite Element Method AFEM, exemplified in the analysis of one- and two-dimensional atomic domains governed by the Lennard Jones interatomic potential. The methodology to synthesize element stiffness matrices and load vectors, the potential energy modifi
Lat. Am. j. solids struct.. Publicado em: 2017
-
18. Time-Domain Three Dimensional BE-FE Method for Transient Response of Floating Structures Under Unsteady Loads
Abstract This paper presents a direct time-domain three dimensional (3D) numerical procedure to simulate the transient response of very large floating structures (VLFS) subjected to unsteady external loads as well as moving mass. The proposed procedure employs the Boundary Element and Finite Element methods (FEM-BEM). The floating structure and the surroundi
Lat. Am. j. solids struct.. Publicado em: 2016-07
-
19. Effects of Partial Edge Loading and Fibre Configuration on Vibration and Buckling Characteristics of Stiffened Composite Plates
Abstract In this work, the influence of uniaxial and biaxial partial edge loads on buckling and vibration characteristics of stiffened laminated plates is examined by using finite element method. As the initial pre-buckling stress distributions within an element are highly non-uniform in nature for a given loading and edge conditions, the critical loads are
Lat. Am. j. solids struct.. Publicado em: 2016-05
-
20. Investigation on Void Effect on Shear Stress Field in Bonded Stepped-Lap Joint
Abstract In this paper, an adhesively-bonded stepped-lap joint suffering from a void within its adhesive layer is investigated. The void separates the layer into two sections. The joint is under tensile load and materials are isotropic and assumed to behave as linear elastic. Classical elasticity theory is used to determine shear stress distribution in the s
Lat. Am. j. solids struct.. Publicado em: 2016-02
-
21. Investigation on the optimal simplified model of BIW structure using FEM
Abstract At conceptual phases of designing a vehicle, engineers need simplified models to examine the structural and functional characteristics and apply custom modifications for achieving the best vehicle design. Using detailed finite-element (FE) model of the vehicle at early steps can be very conducive; however, the drawbacks of being excessively time-con
Lat. Am. j. solids struct.. Publicado em: 2015-10
-
22. Evaluation and comparison of behavior of corrugated steel plate shear walls
In this paper, the nonlinear behaviour of steel plate shear walls with corrugated plates under lateral pushover loading conditions in the models' top level has been analytically investigated by the finite element method. The one-storey frames have beams and columns as boundary elements. Steel plate shear walls are simulated using the finite element method, b
Lat. Am. j. solids struct.. Publicado em: 2015-08
-
23. Revisiting Some Developments of Boundary Elements for Thick Plates in Brazil
AbstractThis work reviews the developments of Boundary Element Method formulations to solve several types of plate bending problems, including non-linear bending. The formulation is developed and solved using the standard BEM procedure, and different integration approaches were discussed and tested. Object oriented implementation issues are commented. Result
Lat. Am. j. solids struct.. Publicado em: 2015-05
-
24. Finite element modeling for buckling analysis of hybrid piezoelectric beam under electromechanical loads
A one-dimensional finite element model for buckling analysis of hybrid piezoelectric beams under electromechanical load is presented in this work. The coupled zigzag theory is used for making the model. The inplane displacement is approximated as a combination of a global third order variation across the thickness with an additional layer wise linear variati
Lat. Am. j. solids struct.. Publicado em: 2014-10