Tubular Joints
Mostrando 1-11 de 11 artigos, teses e dissertações.
-
1. Numerical methodology for analyses of tubular KK multiplanar steel joints
Abstract Herein is presented a numerical methodology for a static resistance analysis of symmetrically loaded multiplanar KK joints in circular hollow steel sections. This methodology addresses factors related to the simulation of KK joints such as the material properties, the boundary conditions, mesh generation and refinement, incremental load steps and fa
REM, Int. Eng. J.. Publicado em: 2017-06
-
2. Numerical Modeling of Corrosion Effectson Ultimate Strength of DX Tubular Joints
Abstract This article presents the results of numerical investigation on modeling buckling behavior and ultimate strength of corroded multi-planar tubular joints. Finite element method was used in order to simulate the behavior of DX multi-planar tubular joints under axial compressive loading. Three different patterns were chosen for corrosion modeling. Also
Lat. Am. j. solids struct.. Publicado em: 2017-02
-
3. Structural analyses of reinforced tubular T-joints
Abstract The use of rolled hollow sections has been substantially boosted mainly due to the advantages associated with structural behavior and aesthetics, leading to an intense use in Europe, Southeast Asia, North America, Australia, and now, in Brazil due to the wider supply of these profiles. Therefore, it is important to investigate the structural behavio
Rem: Rev. Esc. Minas. Publicado em: 2016-03
-
4. Probabilistic analysis of stress intensity factor (SIF) and degree of bending (DoB) in axially loaded tubular K-joints of offshore structures
Abstract The stress intensity factor (SIF) and the degree of bending (DoB) are among the crucial parameters in evaluating the fatigue reliability of offshore tubular joints based on the fracture mechanics (FM) approach. The value of SIF is a function of the crack size, nominal stress, and two modifying coefficients known as the crack shape factor (Yc) and ge
Lat. Am. j. solids struct.. Publicado em: 2015-11
-
5. Evaluation of CHS tubular KK joints
Abstract The widespread use of tubular sections in regions like Western Europe and North America in addition structural and aesthetical reasons can be attributed to the high degree of development of their production technology. Despite this fact their use in Brazil in the past was limited to a few spatial roofs. Currently, the situation in the Brazilian mark
Lat. Am. j. solids struct.. Publicado em: 2015-11
-
6. Comportamento estrutural de ligações tubulares T e KT. / Comportamento estrutural de ligações tubulares do tipo T e KT behavior of structural hollow section joints type "T" and "KT".
Os perfis tubulares sem costura são largamente utilizados em diversos países, porém, no Brasil, o uso desses perfis era bastante limitado, restringindo-se praticamente a coberturas espaciais. A situação do mercado brasileiro começou a se alterar em razão da maior oferta desses perfis proporcionada pelo início da produção pela V&M do BRASIL no ano d
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/03/2012
-
7. Um estudo sobre ligações do tipo YT de barras afastadas de seções tubulares circulares laminadas de aço / A study of gap YT joints circular hollow steel sections
This work presents the theoretical, experimental and numerical analyses using of a YT joint used in plane trusses steel, having as the beginning point the verification of the global behavior of the connection. A connection of truss of YT type with gap members was evaluated. The members that compose the connection, presented here, have circular tubular cross
Publicado em: 2007
-
8. Um estudo sobre ligações do tipo YT de barras afastadas de seções tubulares circulares laminadas de aço / A study of gap YT joints circular hollow steel sections
Este trabalho apresenta os resultados de uma análise teórica, experimental e numérica, de uma ligação YT utilizada em estruturas metálicas planas, tendo como ponto de partida a verificação do comportamento global da ligação. Será avaliada uma ligação de treliça do tipo YT com diferentes afastamentos entre as barras "gap". As barras que compõem
Publicado em: 2007
-
9. Caracterização mecânica e microestrutural de juntas soldadas pelos processos MIG/MAG (GMAW) e arame tubular (FCAW)
Os processos de soldagem MIG/MAG e Arame Tubular são amplamente aplicados na indústria de petróleo. Ambos os processos podem ser aplicados em uma variedade de aços, tais como baixo carbono, inoxidável rntre outras ligas ferrosas. Outra característica importante destes dois processos é a excelente produtividade devida a possibilidade de automação dos
Publicado em: 2005
-
10. Artificial neural networks to calculate stress concentration factors in welded tubular joints. / Redes neurais artificiais na avaliação de concentração de tensões em juntas tubulares soldadas.
Neste trabalho está apresentada uma alternativa para o cálculo do fator de concentração de tensões (FCT) em juntas tubulares soldadas do tipo Y. Redes Neurais Artificiais (RNA) foram utilizadas para representar a distribuição de tensões ao longo da junta tubular para os casos de carregamento força axial no plano e momento fletor no plano. As RNA pod
Publicado em: 1999
-
11. PHOTOELASTIC DETERMINATION OF STRESS INTENSITY FACTORS FOR CRACKS NEAR WELD-JOINTS IN PLANE BARS AND TUBULAR SPECIMENS / FATORES DE INTENSIDADE DE TENSÕES PARA TRINCAS PRÓXIMAS A JUNTAS SOLDADAS PLANAS E TUBULARES VIA FOTOELASTICIDADE
O presente trabalho visa determinar, experimentalmente,Fatores de Intensidade de Tensões, KI e KII em barras e tubos, submetidos à tração, com trincas situadas: I) Junto ao pé do cordão de solda em barras planas soldadas ortogonalmente com relações comprimento de trinca, a, largura da barra, B, a/B igual a 0,1 e a/B igual a 0,2. II) Próximo à raiz
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/03/1987