Thermal Power
Mostrando 1-12 de 262 artigos, teses e dissertações.
-
1. Novel Design of a Hybrid Superconducting Fault Current Limiter with Controlled Solid-State Device
Abstract Fault current limiters are essential devices used to protect the power system and its equipment against high levels of fault current, which are growing up due to the increase of new power sources. This paper proposes a novel design of a Hybrid Superconducting Fault Current Limiter (Hybrid SFCL), which is composed basically by thyristors in series wi
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
2. Thermoelectric properties of barium doped calcium cobaltite obtained by simplified chemical route
Abstract Calcium cobaltite (CCO) thermoelectric ceramics in Ca3Co4O9 and Ca2.95Ba0.05Co4O9 compositions were produced by a simplified chemical route developed in this study. Undoped ceramics sintered at 1193 K for 12 h presented a bulk density equivalent to 77% of the theoretical density, one of the highest values ever found for conventionally sintered undop
Cerâmica. Publicado em: 2021-03
-
3. Temporal Evolution of Roughness Development on Polymer Surfaces Exposed to Non-Thermal Plasma
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
4. COVID-19, Sistema Renina-Angiotensina, Enzima Conversora da Angiotensina 2 e Nicotina: Qual a Inter-Relação?
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
Arq. Bras. Cardiol.. Publicado em: 2020-10
-
5. Physicochemical, thermal and rheological properties of commercial wheat flours and corresponding starches
Abstract The quality attributes, including physicochemical, thermal and rheological properties of commercial bread, pau, multipurpose and cake flours, as well as their corresponding isolated starches were analyzed. Bread flour showed the highest solvent retention capacity (SRC) and gluten performance index (GPI), suggesting better functionality than others.
Food Sci. Technol. Publicado em: 2020-06
-
6. INTERFERENCE OF THE NUMBER OF REMOTE CONTROL VALVES IN USE ON THE ENERGY PERFORMANCE OF AN AGRICULTURAL TRACTOR WITH PRODUCTIVITY MANAGEMENT
ABSTRACT The hydraulic remote control system allows the transfer of energy from the engine through a flow of hydraulic oil to engines and implements pulled by agricultural tractors, which can interfere with its energy and operational performance. This study aimed to evaluate the interference of the number of remote control valves in use on the operational an
Eng. Agríc.. Publicado em: 2020-06
-
7. Effect of ultrasound on different quality parameters of functional sirkencubin syrup
Abstract Ultrasound is a process studied intensively for different products due to the increasing interest in non-thermal technologies. Sirkencubin syrup contains honey and vinegar and is a functional beverage maintaining health. The aim of this study was to examine the effects of the ultrasound process (pH, titratable acidity, brix, phenolic compounds, flav
Food Sci. Technol. Publicado em: 2020-03
-
8. Lightweight high-strength concrete with the use of waste cenosphere as fine aggregate
RESUMO Cenosfera é um sub-produto da combustão do carvão que apresenta interessantes propriedades para ser usado na produção de materiais cimentícios, tais como estrutura oca, baixa densidade, baixa térmica condutividade e notável estabilidade térmica. Além disso, ela mostra reatividade pozolânica na cura térmica. Entretanto, o potencial da cenos
Matéria (Rio J.). Publicado em: 25/11/2019
-
9. Efeitos do Processo de Refusão a Laser na Microestrutura e No Comportamento de Desgaste do Revestimento de WC Aspergido com HVOF
RESUMO O desgaste de componentes e equipamentos industriais e agrícolas representa um grande fator de depreciação de capital e de fonte de despesas com manutenção e reposição de componentes mecânicos. Como o desgaste é um fenômeno essencialmente superficial, envolvendo a remoção mecânica indesejável de material de superfícies, a solução estu
Matéria (Rio J.). Publicado em: 25/11/2019
-
10. Phase Separation and Development of the Microstructure for Stainless Steel to Copper Alloy Weld Joints Using a Fiber Laser
ABSTRACT Stainless steel and copper alloys joints are often applied in aerospace, marine and power industries where both high thermal and electrical conductivity (Cu) and corrosion resistance (steel) are required. In the aerospace industry, in particular for the combustion chamber of rocket engines, copper and steel combinations offer perfect materials selec
J. Aerosp. Technol. Manag.. Publicado em: 10/10/2019
-
11. ENERGETIC ANALYSIS OF AN ABSORPTION CHILLER USING NH3/LiNO3 AS AN ALTERNATIVE WORKING FLUID
Abstract This paper presents a thermodynamic model developed for a prototype absorption chiller using NH3/LiNO3 with 10 kW of nominal capacity. The study was undertaken using thermodynamic modeling based on the mass and energy balance, takes the overall heat transfer coefficients into consideration and uses the characteristic equation method. First, the resu
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
12. Simulação computacional de dispositivos de mistura em câmara de combustão para gases de carbonização
Resumo O carvão vegetal proveniente de florestas plantadas é uma fonte de energia renovável utilizada na siderurgia do Brasil, todavia, em sua produção há liberação do gás de pirólise, que pode ser considerado um gás com baixo poder calorífico inferior. A sustentabilidade da produção de carvão vegetal tem demandado a queima destes gases, poden
Ciênc. Florest.. Publicado em: 30/09/2019