ENERGETIC ANALYSIS OF AN ABSORPTION CHILLER USING NH3/LiNO3 AS AN ALTERNATIVE WORKING FLUID
AUTOR(ES)
Lima, Alvaro A. S.
FONTE
Braz. J. Chem. Eng.
DATA DE PUBLICAÇÃO
30/09/2019
RESUMO
Abstract This paper presents a thermodynamic model developed for a prototype absorption chiller using NH3/LiNO3 with 10 kW of nominal capacity. The study was undertaken using thermodynamic modeling based on the mass and energy balance, takes the overall heat transfer coefficients into consideration and uses the characteristic equation method. First, the results obtained from the thermodynamic modeling developed were compared with those obtained from the characteristic equations of thermal power activation and the cooling capacity. These showed good agreement with the experimental data, there being maximum relative errors of around 5% for most of the operational conditions of the system. Secondly, a parametric analysis was made by altering the variables, such as temperature, mass flow rate, and configuring the heat dissipation that influences the overall performance of the prototype chiller.
Documentos Relacionados
- Estudo dos efeitos do LiNO3 na reação Álcali-Sílica e comparação com os efeitos da cinza volante na reação
- Spectroscopy of 6Li using the ³He(7Li, alpha)6Li reaction
- Nitric oxide as an activation agent for nucleophilic attack in trans-[Ru(NO)(NH3)4{P(OEt)3}](PF6)3
- Atomic Absorption Spectrometry as an Alternative to Determine the Presence of Gold Nanoparticles on or in Silica Matrix
- Promoting walking and cycling as an alternative to using cars: Author's reply