Thermal Plasma
Mostrando 1-12 de 172 artigos, teses e dissertações.
-
1. A Retrospective Study of Coronary Artery Bypass Grafting with Low-Thermal Plasma Dissection Device Compared to Conventional Monopolar Electrosurgery
Abstract Introduction: The objective of this study is to compare the effects of conventional monopolar electrosurgery (CMES) and low-thermal plasma kinetic cautery (PKC) on complications such as bleeding, abnormal wound healing, pain, and drainage in patients who underwent on-pump coronary artery bypass grafting (CABG). Methods: This retrospective clinical
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
2. Temporal Evolution of Roughness Development on Polymer Surfaces Exposed to Non-Thermal Plasma
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
3. COVID-19, Sistema Renina-Angiotensina, Enzima Conversora da Angiotensina 2 e Nicotina: Qual a Inter-Relação?
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
Arq. Bras. Cardiol.. Publicado em: 2020-10
-
4. DISRUPTION OF Nannochloropsis gaditana (EUSTIGMATOPHYCEAE) RIGID CELL WALL BY NON-THERMAL PLASMA PRIOR TO LIPID EXTRACTION AND ITS EFFECT ON FATTY ACID COMPOSITION
Abstract This study assessed the effect of non-thermal plasma (NTP) on Nannochloropsis gaditana cell rupture and subsequent lipid extraction. Micrograph images showed that the surface of original N. gaditana cells appeared smooth and had no apparent holes, whereas after NTP the cells showed a non-uniform apparently fractured surface with many pores and large
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
5. Corrosion Resistance of Stainless Steel Brackets After Thermal Recycling by Direct Flaming
Abstract Objective: To determine and compare the corrosion resistance (based on the release of nickel and chromium in artificial saliva) of various brands of stainless steel brackets after thermal recycling by direct flaming. Material and Methods: This research study employed 40 stainless-steel maxillary premolar brackets from different brands (Ormco, GAC,
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 31/10/2019
-
6. Mineralogical and gemological characterization of emerald crystals from Paraná deposit, NE Brazil: a study of mineral chemistry, absorption and reflectance spectroscopy and thermal analysis
Abstract The Paraná deposit, located at Southwestern Rio Grande do Norte state, in Brazil, is one of the few emerald deposits found at Borborema Province. The mineralization occurs in phlogopite schists and actinolite-phlogopite schists associated with pegmatites and albitites within the Portalegre Shear Zone. Unlike other well-known Brazilian emerald depos
Braz. J. Geol.. Publicado em: 22/08/2019
-
7. Human Hair as Adsorbent of Palladium(II) in Solution: A Precursor of Well-Dispersed Size-Controlled Pd Nanoparticles
This work describes, for the first time, the preparation of palladium nanoparticles supported in thermally-treated human hair. Human hair showed to be an efficient adsorbent of Pd2+ in aqueous media, reaching nearly 100% of adsorption from a 100 ppm solution. The thermal treatment of hair containing Pd2+ at 200 ºC under nitrogen atmosphere led to the format
J. Braz. Chem. Soc.. Publicado em: 2019-04
-
8. A novel thermal plasma-based technology for submicronic silicon carbide production at pilot scale
Resumo Pó submicrométrico de carboneto de silício foi sintetizado em um novo reator piloto de tocha a plasma por radiofrequência. Os precursores foram pós de cinza de pirólise e sílica com tamanhos micrométricos. A taxa de massa do pó de precursor variou na faixa de 600-2500 g/h. O tempo máximo do teste foi de aproximadamente 3 h. Com o objetivo de
Cerâmica. Publicado em: 2019-01
-
9. Membranas Compuestas: propiedades superficiales y estabilidad térmica
ABSTRACT The composite membranes were manufactured with crosslinking poly(vinyl alcohol) on polyethersulfone porous membranes by coating process. PES membranes were exposed to air plasma for the purpose of surface modification. The coating of the support membrane was carried out by using a polymer matrix with a crosslinking agent. The physico-chemical proper
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Extensión de durabilidad de pistones de bombas de fractura hidráulica mediante el empleo de tecnología de nitruración por plasma y PVD
ABSTRACT Hydraulic stimulation technique consists of "fracturing" the formation (rock reservoirs) through pumping a fracturing fluid downhole. This operation is performed by using hydraulic fracturing pumps. The pistons of these pumps are mechanical components performing the intake and compressing fracture fluid by reciprocating action. During this alternati
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Mechanical Loss Angle Measurement for Stressed thin Film Using Cantilever Ring-Down Method
Mechanical loss of the coating materials, and hence thermal noise from the mirror coatings, is a limiting factor for the sensitivity of the laser interferometer gravitational waves detector at its most sensitive frequency range. Mechanical loss of the thin films are often measured using the cantilever ring-down method. But when the thin film is under stress,
Mat. Res.. Publicado em: 28/05/2018
-
12. Surface, microstructural, and adhesion strength investigations of a bioactive hydroxyapatite-titanium oxide ceramic coating applied to Ti-6Al-4V alloys by plasma thermal spraying
Ti-6Al-4V alloy is employed in implants because of its good mechanical strength, excellent biocompatibility, and good resistance to corrosion in biological environments. Herein, a composite (HAp-TiO2, 50% by volume of both components) coating surface employing Ti-6Al-4V was characterized. Samples were analyzed post fabrication and post heat treatment to anal
Mat. Res.. Publicado em: 28/05/2018