Thermal Industry
Mostrando 1-12 de 213 artigos, teses e dissertações.
-
1. PROPRIEDADES DE PROTEÇÃO TÉRMICA DO CARBETO DE SILÍCIO EM REVESTIMENTOS CERÂMICOS
In recent years, research on the development of protective materials has expanded significantly in order to find efficient and economically viable solutions for application in various industrial segments. Among these materials, those aimed at protecting metallic substrates against high temperatures that end up causing corrosive processes, stand out due to th
Quím. Nova. Publicado em: 2021-01
-
2. Kinetic Parameters of the Thermal Oxidation and Degradation Reactions in Soybean Oil and Palm Olein
Partially hydrogenated soybean oil and palm olein are oils that are widely used in the food industry. Continuous contact with air may cause changes of the triglycerides chemical structure, to eventually produce substances of lower molar masses that may be toxic to mammals. This study aimed to determine the kinetic parameters for the thermal oxidation of thes
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
3. Is it still worth Publishing Case Reports? They are Part of our Lives
Partially hydrogenated soybean oil and palm olein are oils that are widely used in the food industry. Continuous contact with air may cause changes of the triglycerides chemical structure, to eventually produce substances of lower molar masses that may be toxic to mammals. This study aimed to determine the kinetic parameters for the thermal oxidation of thes
Braz. J. Cardiovasc. Surg.. Publicado em: 2020-10
-
4. Calcium oxalate content from two Amazonian amilaceous roots and the functional properties of their isolated starches
Abstract The calcium oxalate content from two Amazonian amilaceous roots, Xanthosoma sagittifolium and Pachyrhizus tuberosus, before and after cooking were studied in the present work. Calcium oxalate raphides were observed by light microscopy in longitudinal sections from fresh tubers. The functional properties and physicochemical characteristics of isolate
Food Sci. Technol. Publicado em: 2020-09
-
5. Kinetics of Lumefantrine Thermal Decomposition Employing Isoconversional Models and Artificial Neural Network
Thermal analysis can be used to determine shelf-life and kinetic parameters in pharmaceutical systems. This work investigates the kinetic of lumefantrine thermal decomposition, an antimalarial, using non-isothermal and isothermal experimental data. The non-isothermal conditions are analyzed applying Vyazovkin method, while isothermal conditions employ models
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
6. STABILIZATION STUDY OF TETRAMERIC Kluyveromyces lactis β-GALACTOSIDASE BY IMMOBILIZATION ON IMMOBEAD: THERMAL, PHYSICO-CHEMICAL, TEXTURAL AND CATALYTIC PROPERTIES
Abstract We investigated the immobilization of a tetrameric Kluyveromyces lactis β-galactosidase (EC: 3.2.1.23) (KL-Gal) on Immobead 150 using different support modification strategies. Immobead support was modified using an acid solution of H2SO4:HNO3 (3:1) (Immobead-Ac) or 5 % (v/v) glutaraldehyde (Immobead-Glu). Its unmodified form (Immobead) was also te
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
7. Thermosonication processing of quince (Cydonia Oblonga) juice: Effects on total phenolics, ascorbic acid, antioxidant capacity, color and sensory properties
RESUMO O marmelo (Cydonia oblonga) é uma fruta importante para a indústria de suco, devido às suas propriedades nutricionais que sustentam a saúde. Neste estudo, o objetivo foi otimizar os componentes bioativos (conteúdo fenólico total, ácido ascórbico e capacidade antioxidante total) e os valores de cor (L *, a * eb) usando o tratamento termossônic
Ciênc. agrotec.. Publicado em: 09/12/2019
-
8. Síntese de perovskitas tipo LaAl1-xCrxO3 para aplicação em esmalte transparente
RESUMO No Brasil, estudos sobre pigmentos cerâmicos ainda são bastante escassos. Por esta razão, grande parte dos pigmentos consumidos pela indústria cerâmica são importados dos países europeus. Outra parte destes pigmentos são obtidos pela rota cerâmica, entretanto, esta rota de síntese resulta em pigmentos com propriedades bastante heterogêneas,
Matéria (Rio J.). Publicado em: 25/11/2019
-
9. Avaliação tribológica de óleos hidráulicos biodegradável e mineral com deslizamento entre as ligas de Cu-Zn e WC-CoCr
RESUMO A correta seleção dos óleos lubrificantes e das superfícies de contato melhoram o desempenho e reduzem o consumo de energia das máquinas Por isso, a engenharia de superfícies propõe novos revestimentos aos quais seu comportamento tribológico combinado com o uso de óleos biodegradáveis em componentes de sistema hidráulicos, não são conheci
Matéria (Rio J.). Publicado em: 25/11/2019
-
10. Acid Hydrolysis of Regular Corn Starch under External Electric Field
The main objective of the present work is the investigation of a new method for starch hydrolysis. For this, we proposed the acid hydrolysis under the action of an external electric field, able to develop a faster reaction than the conventional one. Corn starch with 18% amylose was subjected to a fixed voltage, varying the external electric field application
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
11. Phase Separation and Development of the Microstructure for Stainless Steel to Copper Alloy Weld Joints Using a Fiber Laser
ABSTRACT Stainless steel and copper alloys joints are often applied in aerospace, marine and power industries where both high thermal and electrical conductivity (Cu) and corrosion resistance (steel) are required. In the aerospace industry, in particular for the combustion chamber of rocket engines, copper and steel combinations offer perfect materials selec
J. Aerosp. Technol. Manag.. Publicado em: 10/10/2019
-
12. Proposição de um Modelo Empírico para Determinação das Temperaturas Críticas Durante Resfriamento Contínuo em Zonas Termicamente Afetadas de Aços IF Soldados pelo Processo TIG
Resumo Aços IF são amplamente empregados na indústria automobilística. No decorrer das aplicações de soldagem, eles passam pela transformação de fase austenita (γ) → ferrita (α) que ocorre por nucleação e crescimento de grão e, em condições isotérmicas, é descrita pela equação JMAK. Todavia, as transformações de fases pós-soldagem ac
Soldag. insp.. Publicado em: 23/09/2019