Structural Steel
Mostrando 13-24 de 286 artigos, teses e dissertações.
-
13. Optimized design of RC deep beams based on performance metrics applied to strut and tie model and in-plane stress conditions
Abstract Deep beams do not behave according to classical beam theory. The nonlinearity of strain distribution within these elements requires application of strut and tie models (STM) or other alternatives to evaluate the complex stress field. Although the design of these elements is a common task for structural engineers, limited research is found on assessi
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
14. Evaluation of the resistance of trussed slabs with steel formwork in cold formed U profile
Abstract In the last decades, the modernization in structural engineering has increased the use of steel-concrete composite and hybrid systems for slabs, when the adherence in the interface of the materials is present or not, respectively. In addition to the traditional steel deck, a similar solution for precast trussed slabs has been used for small construc
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
15. Slabs strengthened for punching shear with post-installed steel and CFRP connectors
Resumo Acidentes estruturais por punção vêm sendo relatados em edifícios com lajes lisas. As recomendações de projeto apresentadas pelas normas podem levar a estimativas de resistência à punção divergentes para situações semelhantes. Além disso, não são apresentadas orientações para o dimensionamento do reforço à punção de lajes existent
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
16. Corrodibility and Adherence of Reinforced Concrete Rebars Electroplated with Zinc and Zinc-Nickel Alloys
Reinforced concrete is the main structural material used in the world in the construction of bridges, roads and commercial and residential buildings. One effective method for preventing corrosion of steel reinforcement is the application of galvanic coatings to the reinforcement itself. The present study evaluated the performance of three groups of reinforci
Mat. Res.. Publicado em: 15/07/2019
-
17. Influence of the Gas Pressure of Plasma Nitriding on the Structural, Mechanical and Tribological Surface Properties of AISI 316L
In this paper, the influence of gas nitriding (80% H2-20% N2) pressure (between 3 and 7 Torr) on the modification of surface properties of AISI 316L stainless steel is examined. The structural, mechanical, tribological and electrochemical properties of the layer produced in disk samples were studied. The samples’ characteristics were determined by scanning
Mat. Res.. Publicado em: 15/07/2019
-
18. Structural Behaviour of Cold-Formed Steel of Double C-Lipped Channel Sections Integrated with Concrete Slabs as Composite Beams
Abstract Cold-formed steel (CFS) construction is widely recognised as an important contributor to sustainability and green construction. Thus, the use of CFS construction is encouraged and had been advanced by innovations in its structural applications. One such innovation that has recently gained popularity is the use of CFS sections in composite constructi
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
19. Role of multi-layer pyramidal truss cores as an inner material of energy absorbing structures
Abstract In this study, finite element analysis was performed to investigate the feasibility of multi-layered pyramidal truss structures as a filler material of energy absorbing tubes. Rectangular tubes with the filler and empty tubes were compressed at a constant velocity of 10km/h and their energy absorbing capabilities were compared to demonstrate the str
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
20. FE Modeling and Seismic Performance Evaluation of Hybrid SMA-Steel RC Beam-Column Joints
Abstract Severe permanent deformations of buildings during earthquakes have been found as one of the major causes of the instability and failure of structures. The application of superelastic Shape Memory Alloy rebars at the plastic hinge region of reinforced concrete beam-column joints (SESMA-BCJs) can eliminate the seismic residual deformations. Such self-
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
21. Inelastic second-order analysis of steel columns under minor-axis bending
Abstract The inelastic second-order behavior of steel structural columns under minor-axis bending is presented in this article. To study this behavior, a nonlinear frame element formulation is adopted in which the steel's plasticity process is accompanied at the nodal points of each finite element through the refined plastic-hinge method (RPHM). A tangent mo
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
22. Study on impact of fiber hybridization in material properties of engineered cementitious composites
ABSTRATO Compósito Cimentício Projetado (ECC) é um tipo de compósitos cimentícios reforçados com fibras de alto desempenho melhorados com bom comportamento de tração, compressão e flexão. O ECC é conhecido por seu comportamento de endurecimento de tensão sob tensão e tem sido cada vez mais aplicado na prática de engenharia. O processo de adicio
Matéria (Rio J.). Publicado em: 10/06/2019
-
23. Avaliação do grau de orientação de fibras de aço induzida na moldagem de elementos planos com concreto autoadensável
RESUMO O uso de concreto autoadensável (CAA) aliado ao concreto reforçado com fibras (CRF) tem sido objeto de várias pesquisas recentes. A combinação da fluidez do CAA com o uso de fibras aumenta a probabilidade de que, no processo de lançamento, seja possível causar orientação preferencial nas fibras, inclusive em elementos planos. Isto pode ser be
Matéria (Rio J.). Publicado em: 10/06/2019
-
24. Investigação da corrosão eletrolítica em telhas de aço recobertas com zincalume
RESUMO As telhas de aço usadas em galpões de fazendas expostas às intempéries ficam vulneráveis à degradação. A corrosão surge devido à diferença de potencial elétrico entre a superfície metálica e o meio, levando a um carregamento elétrico dessa superfície. Elas então necessitam da proteção de um recobrimento anticorrosivo, cujo objetivo
Matéria (Rio J.). Publicado em: 20/05/2019