Stress Strain Behavior
Mostrando 1-12 de 166 artigos, teses e dissertações.
-
1. The Concept of a Rupture Risk Envelope for the Cochleo-Saccular Membranes
Abstract Introduction Alterations in endolymphatic pressure have long been suspected of being associated with the development of endolymphatic hydrops and rupture of the membranous labyrinth. More recently, there has been a focus on how membrane mechanics might contribute to membrane rupture. This is suspected to involve the viscoelastoplastic properties of
International Archives of Otorhinolaryngology. Publicado em: 2022
-
2. Numerical implementation of a micromechanics-based viscoelastic model for geomaterials with isotropically distributed micro-fractures
Abstract The constitutive behavior of geomaterials is generally affected by the presence at different scales of discontinuity surfaces with different sizes and orientations. According to their mechanical behavior, such discontinuities can be distinguished as cracks or fractures. Fractures are interfaces that can transfer normal and tangential stresses, where
Lat. Am. j. solids struct.. Publicado em: 25/11/2019
-
3. Avaliação dos processos de fratura em filmes finos através da simulação de ensaios de indentação com penetradores esféricos
RESUMO Recentes trabalhos propõem a utilização dos ensaios de indentação como uma ferramenta capaz de avaliar características mecânicas de filmes finos, assim como avaliar possíveis falhas em sistemas que conjugam filmes de alta dureza depositados em substratos metálicos em solicitações tribológicas. Entretanto, a implementação da técnica de i
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Computational algorithm for the verification of reinforced concrete sections in fire situation
Resumo As estruturas de concreto armado podem ter sua capacidade resistente reduzida devido à degradação de suas propriedades mecânicas com a temperatura, aumentando o risco de colapsos estruturais. Assim, o dimensionamento de uma estrutura deve considerar seu comportamento em temperatura ambiente e em situação de incêndio (ABNT NBR 14432:2001). Neste
Rev. IBRACON Estrut. Mater.. Publicado em: 23/09/2019
-
5. Sustainable blends of LDPE/NR and sugarcane bagasse ashes with PE-g-MA thermomechanical relationships
RESUMO As blendas poliméricas obtidas com resíduos que antes eram chamados de lixos vêm crescendo como uma solução viável, permitindo melhorias nas propriedades mecânicas e como alternativas sustentáveis. Este trabalho relata os efeitos de misturas de polietileno de baixa densidade (PEBD) e borracha natural(NR), com cinzas de bagaço de cana-de-açú
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Optimized design of RC deep beams based on performance metrics applied to strut and tie model and in-plane stress conditions
Abstract Deep beams do not behave according to classical beam theory. The nonlinearity of strain distribution within these elements requires application of strut and tie models (STM) or other alternatives to evaluate the complex stress field. Although the design of these elements is a common task for structural engineers, limited research is found on assessi
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
7. Fragmentation model for the tensile response of unidirectional composites based on the critical number of fiber breaks and the correction of the fiber-matrix interfacial strength.
Abstract A fragmentation model based on global load sharing (GLS) theory is developed to obtain stress-strain curves that describe the mechanical behavior of unidirectional composites. The model is named C N B + τ * because it is based on the Critical Number of Breaks model (CNB) and on the correction of the fiber matrix interfacial strength, τ *
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
8. Effect of cold-working process on cyclic deformation of electrolytic copper
Abstract Cyclic softening and hardening processes are expressed by the change in the stress amplitude necessary to cause a given strain amplitude. Understanding the cyclic stress-strain behavior of materials is an important step in the complex study of their fatigue behavior. The potential differences between the defect structures of cold-formed materials ma
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
9. Tensile Armor Wires Submitted to Slow Strain Rate Tests in a Corrosive Environment and Cathodic Protection: a Comparison Between Two Different Microstructures
Tensile armor in flexible pipes consists of two or more layers of steel wires. Damage to the outer sheath may cause ingress of seawater in the annular space and thus corrosion of the armor wires. This work focused on the susceptibility of these wires to stress corrosion cracking (SCC) and hydrogen embrittlement (HE) using a slow strain rate test (SSRT) under
Mat. Res.. Publicado em: 06/05/2019
-
10. Experimental and numerical modeling of horizontally-bent buried pipelines crossing fault slip
Abstract The behavior and response of pipelines subjected to slip fault movement is studied by numerical simulations as well as experimental setup. A finite element modeling is also developed via ABAQUS software. In this study, an artificial accelerogram is applied to the system and matched against the response spectrum according to the standard No. 2800 (Ir
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
11. Influence of the Micromechanics Models and Volume Fraction Distribution on the Overall Behavior of SiC/Al Functionally Graded Pressurized Cylinders
Abstract The assessment of the differences in results obtained from various micromechanics homogenization schemes, as well as the implications of assuming different volume fraction profiles was carried out in the present work. The functionally graded composite chosen for the analysis was Al-SiC and comparisons were made in terms of stress and strain distribu
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
12. Influence of heat treatment on the mechanical properties of CrNi stainless steel orthodontic wires
RESUMO Introdução: o tratamento térmico de fios de aço inoxidável é um procedimento clínico rotineiro adotado por muitos cirurgiões-dentistas para aliviar o estresse causado após a confecção de dobras no fio. O presente estudo avaliou a influência do tratamento térmico em fios de aço inoxidável com secção retangular de 0,016’’ x 0,022�
Dental Press J. Orthod.. Publicado em: 2019-02