Fragmentation model for the tensile response of unidirectional composites based on the critical number of fiber breaks and the correction of the fiber-matrix interfacial strength.
AUTOR(ES)
Vanegas-Jaramillo, Juan David
FONTE
Lat. Am. j. solids struct.
DATA DE PUBLICAÇÃO
15/08/2019
RESUMO
Abstract A fragmentation model based on global load sharing (GLS) theory is developed to obtain stress-strain curves that describe the mechanical behavior of unidirectional composites. The model is named C N B + τ * because it is based on the Critical Number of Breaks model (CNB) and on the correction of the fiber matrix interfacial strength, τ *. Model allows both obtaining the ultimate tensile strength of CFRP and GFRP composites, and correcting the σ vs ε curve to match its peak point with the predicted strength, which is more accurate than the one obtained by previous GLS-based models. Our model is used to classify the mechanical response of the material according to the energetic contributions of two phenomena up to the failure: intact fibers (IF) and fragmentation (FM). Additionally, the influence of fiber content, V f, on the tensile strength, σ U, failure strain, ε U, and total strain energy, U T, is analyzed by means of novel mechanical-performance maps obtained by the model. The maps show a dissimilar behavior of σ U, ε U and U T with V f between GFRP and CFRP composites. The low influence of V f on the percent energetic contributions of IF and FM zones, as well as the larger energetic contribution of the FM zone, are common conclusions that can be addressed for both kinds of composites.
Documentos Relacionados
- Fiber-matrix Contact Stress Analysis for Elastic 2D Composite Solids
- Effect of the interfacial adhesion on the tensile and impact properties of carbon fiber reinforced polypropylene matrices
- On Micro-Buckling of Unidirectional Fiber-Reinforced Composites by Means of Computational Micromechanics
- Electromagnetic Properties of Multifunctional Composites Based on Glass Fiber Prepreg and Ni/Carbon Fiber Veil
- Tensile Behavior of lignocellulosic reinforced polyester composites: Part III coir fiber