Stainless Steel
Mostrando 1-12 de 774 artigos, teses e dissertações.
-
1. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
2. AN APPROACH BASED ON ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY TO STUDY THE GLYCEROL/BIODIESEL GRAVITY SEPARATION
In this study, electrochemical impedance spectroscopy (EIS) is evaluated as a novel application in the biodiesel purification process. EIS is proposed as a tool to study the behavior of charge carriers produced from side reactions or dissociations of some impurities during the gravitational separation of glycerol dispersed in crude biodiesel after the transe
Quím. Nova. Publicado em: 2020-12
-
3. Pyrolysis of the Caupi Bean Pod (Vigna unguiculata): Characterization of Biomass and Bio-Oil
The use of agricultural residues for the production of bio-oil is an important alternative to the use of fossil fuels. In this study, the Caupi bean pod (Vigna unguiculata) was characterized and used as biomass in the production of bio-oil. This biomass was evaluated in terms of physicochemical, morphological (scanning electron microscopy (SEM)), and thermal
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
4. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019
-
5. Corrosion Resistance of TiO2-ZrO2 Nanocomposite Thin Films Spin Coated on AISI 304 Stainless Steel in 3.5 wt. % NaCl Solution
Utilizing high chromium and nickel content in AISI 304 steel confers its good corrosion resistance. However, the high content of chromium and nickel increases the steel susceptibility to corrosion caused by the high concentration of chlorine. Consequently, the electrochemical and mechanical performance of the steel degrades. In this study, the effect of addi
Mat. Res.. Publicado em: 02/12/2019
-
6. Development and evaluation of physical properties of a low-cost handheld device for airway clearance therapy
RESUMO Diversas doenças respiratórias são caracterizadas por hipersecreção com necessidade de higiene brônquica (HB). Osciladores orais de alta frequência (OOAF) são dispositivos que promovem HB diária; entretanto, seu custo pode ser inviável para aquisição por pacientes com baixa renda. Os objetivos deste estudo foram: desenvolver um OOAF de bai
Fisioter. Pesqui.. Publicado em: 02/12/2019
-
7. Influence of Modulated Photo-Activation on Shrinkage Stress and Degree of Conversion of Bulk-Fill Composites
Resumo O presente estudo teve como objetivo avaliar as propriedades de polimerização de materiais bulk-fill (baixa e alta viscosidade) utilizando luz contínua de alta intensidade e fotoativação intermitente em relação ao estresse de contração de polimerização e grau de conversão (DC). As seguintes resinas compostas Bulk-fill e nanohíbridas conve
Braz. Dent. J.. Publicado em: 28/11/2019
-
8. Continuously monitored lactose crystallization in a vibrated bed
Resumo O estudo visa avaliar a distribuição de tamanho cristalino e a microscopia da fase cristalina na cristalização isotérmica de lactose, usando alta concentração de sementes (fase densa). O monitoramento in-line foi realizado utilizando as sondas de medição de reflexão de feixe focalizado (FBRM) e de medição de visão de partículas (PVM), um
Braz. J. Food Technol.. Publicado em: 14/11/2019
-
9. Influence of the methodology on the formation of zeolite membranes MCM-22 for the oil/water emulsion separation
Resumo Esse trabalho teve por objetivo produzir membranas zeolíticas MCM-22 utilizando dois métodos distintos de síntese, dip coating (DC) e transporte em fase vapor (VPT), para serem avaliadas no processo de separação emulsão óleo/água. As membranas foram preparadas a 150 °C por 10 dias, caracterizadas por difração de raios X e microscopia eletr�
Cerâmica. Publicado em: 14/11/2019
-
10. Corrosion Resistance of Cu-Alloyed Precipitation Hardenable Duplex Stainless Steel ASTM A890 Grade 1B
Duplex stainless steels (DSS) are corrosion resistant alloys largely used in chemical and petrochemical industries. Some commercial DSS contain 0.5-1.0% copper addition to improve the corrosion resistance by reducing the corrosion rate in non-oxidizing environments. Higher copper addition (≥ 2%) can also hard by precipitation, especially when fine copper p
Mat. Res.. Publicado em: 07/11/2019
-
11. Corrosion Resistance of Stainless Steel Brackets After Thermal Recycling by Direct Flaming
Abstract Objective: To determine and compare the corrosion resistance (based on the release of nickel and chromium in artificial saliva) of various brands of stainless steel brackets after thermal recycling by direct flaming. Material and Methods: This research study employed 40 stainless-steel maxillary premolar brackets from different brands (Ormco, GAC,
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 31/10/2019
-
12. Influence of the Pre-Treatments and Process Temperature on the Adhesion of TiN Films Deposited by PBII&D Over Nitrided Austenitic Stainless Steel
In this work the influence of pre-treatment cleaning processes in the adhesion of TiN films deposited by the plasma based ion implantation and deposition (PBII&D) process over plasma nitrided AISI 316L stainless steel was investigated, varying the gas composition, the duration of the sputtering process and the temperature in the same deposition chamber. The
Mat. Res.. Publicado em: 28/10/2019