Influence of the methodology on the formation of zeolite membranes MCM-22 for the oil/water emulsion separation

AUTOR(ES)
FONTE

Cerâmica

DATA DE PUBLICAÇÃO

14/11/2019

RESUMO

Resumo Esse trabalho teve por objetivo produzir membranas zeolíticas MCM-22 utilizando dois métodos distintos de síntese, dip coating (DC) e transporte em fase vapor (VPT), para serem avaliadas no processo de separação emulsão óleo/água. As membranas foram preparadas a 150 °C por 10 dias, caracterizadas por difração de raios X e microscopia eletrônica de varredura e avaliadas em testes de permeação de água pura e testes de separação emulsão óleo/água de um efluente sintético, utilizando um módulo de aço inoxidável nas condições de concentração inicial da emulsão de 100 mg/L, temperatura de 25 °C e pressão de 2,0 bar. Os resultados mostraram que a membrana zeolítica MCM-22 por DC teve valor final da concentração no permeado de 3,2 mg/L e a membrana preparada por VPT apresentou valor final de 3,9 mg/L, que foram dentro dos padrões exigidos pela Resolução nº 392 do CONAMA que é de até 20 mg/L de óleos minerais.Abstract This work aimed to produce zeolite membranes MCM-22 using two methods of synthesis, dip coating (DC) and vapor phase transport (VPT), to be evaluated in the oil/water emulsion separation process. The membranes were prepared at 150 °C for 10 days and characterized by X-ray diffraction and scanning electron microscopy. They were evaluated in tests of pure water permeation and oil/water emulsion separation system of a synthetic effluent, using a stainless-steel module under the conditions of the initial concentration of the emulsion of 100 mg/L, temperature of 25 °C and pressure of 2.0 bar. The results showed that the MCM-22 zeolite membrane by DC had the final value of the permeate concentration of 3.2 mg/L and the membrane prepared by VPT presented a final value of 3.9 mg/L which were within the standards required by Resolution No. 392 of CONAMA which is up to 20 mg/L of mineral oils.

Documentos Relacionados