Solidification Numerical Analysis
Mostrando 1-12 de 21 artigos, teses e dissertações.
-
1. Numerical Analysis of Twin-Roll Casting of Strips With Profiled Cross-Section
The relatively high production costs of innovative materials with tailored properties such as Tailor Welded Blanks, Patchwork Blanks, Tailor Heat Treated Blanks and Tailor Rolled Blanks are responsible for a growing interest in new cost-effective production methods. One of the promising energy-saving and environmental friendly technologies for the production
Mat. Res.. Publicado em: 16/04/2018
-
2. Microstructure and Flight Behaviors of Droplet and its Solidification in Twin-Wire Arc Sprayed Ni-Al Composite Coatings
Droplet flight and solidification behaviors during twin-wire arc sprayed (TWAS) composite coatings were systematically investigated. Both theoretical model and numerical method were established for calculating the droplet deformation, breakup and solidification process in air flow based on the volume of fluid (VOF) dual-phase flow model jointed with the stan
Mat. Res.. Publicado em: 19/03/2018
-
3. Numerical Simulation of Zr-based Bulk Metallic Glass During Continuous Casting Solidification Process
A numerical simulation method was used to analyze the solidification process of Zr-based bulk metallic glass (BMG) during the horizontal continuous casting (HCC) process. The large-scale general-purpose finite element analysis software ANSYS was adopted to develop a temperature field model. The variation of temperature field in the specific area at different
Mat. Res.. Publicado em: 23/10/2015
-
4. Characterization of the Al-3wt.%Si alloy in unsteady-state horizontal directional solidification
The main purpose of this paper is to investigate both the columnar to equiaxed transition and primary dendritic arm spacings of Al-3wt.%Si alloy during the horizontal directional solidification. The transient heat transfer coefficient at the metal-mold interface is calculated based on comparisons between the experimental thermal profiles in castings and the
Mat. Res.. Publicado em: 14/05/2013
-
5. Modelagem analítica e numérica da solidificação de ligas binárias : análise de fatores de influência / Analytical and numerical modeling of solidification of binary alloys : analysis of influential factors
Em um estudo completo da solidificação, a transferência de calor e a transferência de massa são duas componentes que devem ser analisadas. Este trabalho inicia-se com o levantamento de fatores que podem influenciar a modelagem matemática da transferência de calor em sistemas de solidificação unidirecional. Dados experimentais, obtidos através da so
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/01/2012
-
6. Estudo expermental e numérico da solidificação em torno de um tubo aletado radialmente com e sem promotor de turbulência / Experimental and numerical study of solidification around a finned tube radially without turbulence promoter
O armazenamento de calor na forma de calor latente representa uma alternativa de grande potencial em sistemas intermitentes e de conservação. Uma das geometrias menos exploradas na literatura e no campo de aplicação é a geometria cilíndrica com aletas fixadas radialmente ao longo do tubo. As aletas neste caso representam dispositivos para aumentar a ta
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/02/2010
-
7. Numerical and experimental study of solidification around the cylinder with and without the use of turbulence promoter / Estudo numerico e experimental da solidificação em torno de cilindro com e sem o uso de promotor de turbulencia
The process of solidification of a material of change of phase in a region annular around of a cylinder cooled by fluid passing in its interior is studied numerical and experimentally, objectifying applications in systems of storage of latent heat. The boundary immobilization technique is used for solving for phase-change problem. The coordinate transformati
Publicado em: 2009
-
8. Avaliação do efeito térmico das soleiras de diabásio nas rochas geradoras da formação Irati (Bacia do Paraná, Brasil) através de técnicas de modelagem numérica / Assessment of the thermal effects of diabase sills on source rocks of Irati formation (Parana, Basin, Brazil) using numerical modeling techniques
To evaluate the thermal maturity and thermal history of source rocks in basins with magmatic activity it is important to consider the thermal effects imposed by igneous intrusions, such as sills and dykes. This work uses the finite difference method for such evaluation, with the transient numerical analysis of heat conduction from Cretaceous diabase sills in
Publicado em: 2006
-
9. Macrosegregation and porous formation in Al-Cu alloys : numerical modeling and experimental development / Macrossegregação e formação de poros na solidificação de ligas Al-Cu : modelagem numerica e desenvolvimento experimental
A porosidade é um dos mais importantes defeitos encontrados em componentes fundidos. Neste trabalho, a macrossegregação e a formação de porosidade são investigadas por meio de modelagem numérica e experimentos de solidificação unidirecional vertical ascendente. As composições locais, ao longo dos lingotes, para ligas binárias de alumínio e cobre
Publicado em: 2006
-
10. Numerical analysis of water melting and solidification in the interior of tubes
Latent energy storage systems find applications in many engineering fields, including industrial refrigeration plants, air conditioning installations, recovery of heat in industrial processes, etc. To tackle the design of such systems, it is necessary to have correlations to account for the heat transfer during the melting and solidification of the phase cha
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2005-06
-
11. Analises numerica, analitica e experimental da macrossegregação inversa na solidificação
o presente trabalho analisa as influências do teor de soluto, do superaquecimento e do coeficiente global de transferência de calor metal/fluido (hg), na macrossegregação inversa durante a solidificação unidirecional vertical ascendente de ligas binárias AI-Cu e ternária AI-Cu-Si. Os perfis experimentais de segregação ao longo dos lingotes para as
Publicado em: 2004
-
12. Simulação numerica do processo de solidificação de placas finas com redução da espessura com o nucleo liquido
New processes have been developed in the last years to produce near net shape metallic products with final or almost final dimensions. Thin slab continuous casting is a near net shape process to produce slabs with thickness convenient for direct rolling. Numerical modeling has been explored to simulate and to predict parameters of solidification of metaIs in
Publicado em: 2003