Microstructure and Flight Behaviors of Droplet and its Solidification in Twin-Wire Arc Sprayed Ni-Al Composite Coatings
AUTOR(ES)
Wang, Jixiao, Wang, Yongdong, Liu, Jingshun, Zhang, Lunyong, Gao, Limin, Zheng, Guanghai, Shen, Hongxian, Sun, Jianfei
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
19/03/2018
RESUMO
Droplet flight and solidification behaviors during twin-wire arc sprayed (TWAS) composite coatings were systematically investigated. Both theoretical model and numerical method were established for calculating the droplet deformation, breakup and solidification process in air flow based on the volume of fluid (VOF) dual-phase flow model jointed with the standard k-ε model. The experimental simulation results indicate that TWAS droplet is broken through explosion or two steps breaking process. The calculation of TWAS gas flight dynamics demonstrates that the TWAS particles are accelerated at first and then slowed down. Microstructure of the TWAS prepared Ni-5wt.%Al and Ni-20wt.%Al composite coating was accordingly characterized by XRD, SEM and TEM, so the phase compositions of the Ni-Al composite coatings were obtained. TEM analysis also showed that an amorphous phase was formed according to the characteristic of diffraction ring in Ni matrix solid solution at an original state.
Documentos Relacionados
- Atomization Characteristics of Droplet and Morphologies of Arc Sprayed Ni-Al Particles and Composition Coatings
- Microstructure and Wear Resistance of ZrC-ZrB2 /Ni Composite Coatings Prepared by Plasma Transferred Arc Cladding
- Microstructure and mechanical properties of thermal sprayed nanostructured Cr3C2-Ni20Cr coatings
- Determination of mesalamine by spectrofluorometry in human serum after solid-phase extraction with Ni-Al layered double hydroxide as a nanosorbent
- Effect of TiC Particles Concentration on Microstructure and Properties of Ni-TiC Composite Coatings