Sbf
Mostrando 1-12 de 131 artigos, teses e dissertações.
-
1. Bioactive SiO2-K2O-CaO-P2O5 glass-ceramic scaffold prepared using polyurethane foam template
Abstract A glass-ceramic in the SiO2-K2O-CaO-P2O5 quaternary system was prepared by substituting the Na2O component with K2O to avoid Na2Ca2Si3O9 formation upon thermal treatment since this phase decreases apatite formation kinetics on glass material. To form the glass-ceramic, a modified sol-gel method involving solution precipitation, followed by reagents
Cerâmica. Publicado em: 2023
-
2. Characterization and potential applications of new boron-phosphate glass in the CaO-P2O5-K2O-B2O3 system
Abstract Boron phosphate glasses are known for their unique properties and have been investigated as biodegradable materials for biomedical applications. In this context, the present research studied the characterization of physical, mechanical, and bioactive properties of new boron-phosphate glass in the CaO-P2O5-K2O-B2O3 system produced by the melt-quenchi
Cerâmica. Publicado em: 2022
-
3. Influência da orientação preferencial na bioatividade da hidroxiapatita: potencial reparo dentário e material de revestimento de superfície de implante
Resumo Hidroxiapatita bioativa (HAp) foi sintetizada usando um método simples de precipitação química e tratamento térmico a partir de conchas de caracol (Achatina achatina) e uma solução contendo fosfato. De acordo com os padrões de difração de raios X obtidos, o tratamento térmico causou orientação cristalográfica preferencial ao longo do eix
Cerâmica. Publicado em: 2020-09
-
4. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
5. Biomimetic Coating of Mechanochemically Synthesized Zirconium Titanate
A biomimetic method was used to promote bioactivity of ZrTiO4. Zirconium titanate was obtained by using a combination of techniques such as mechanical milling and heat treatment of zirconia and titania powders. The effect of milling time on the evolution of the ZrTiO4 phase formation was studied. Powders were uniaxially pressed followed by heat treatment for
Mat. Res.. Publicado em: 10/07/2019
-
6. Calcium phosphate submicrometric fibers produced by solution blow spinning
The purpose of this work was to produce submicrometric hydroxyapatite (HA) and beta-tricalcium phosphate (β-TCP) biphasic fibers by means of solution blow spinning (SBS). This method was chosen due to its lower cost and higher production rate than those of electrospinning, which is normally employed in ceramic fiber production. The fibers thus obtained were
Mat. Res.. Publicado em: 18/04/2019
-
7. Morphological, thermal and bioactivity evaluation of electrospun PCL/β-TCP fibers for tissue regeneration
Abstract Electrospinning is a simple and low-cost way to fabricate fibers. Among the various polymers used in electrospinning, polycaprolactone (PCL) stands out due to its excellent biodegradability and biocompatibility. However, PCL has some limitations such as low bioactivity, hydrophobic surface, and long in vivo degradation. Calcium phosphate ceramics h
Polímeros. Publicado em: 18/03/2019
-
8. Comparative study between natural and synthetic Hydroxyapatite: structural, morphological and bioactivity properties
ABSTRACT In this work, a study of hydroxyapatite (HAp) powders obtained using both, porcine bones and chemical precursors was carried put. In the case of HAp obtained by means of porcine bones, physical processes as cooking, washing and milling were developed, for removing the organic material from the bones; after that, the powders were submitted to a therm
Matéria (Rio J.). Publicado em: 06/12/2018
-
9. Microstructure, Mechanical Properties and in vitro Biological Behavior of Silicon Nitride Ceramics
The bioinert surface of silicon nitride ceramics led us to investigate the additions of SiO2, CaO and Al2O3 in order to aid the liquid phase sintering and improve the mechanical properties and biological behavior of the final materials. The sintered materials reached ca. 97% of theoretical density and total α→β-Si3N4 transformation. The samples had relat
Mat. Res.. Publicado em: 13/09/2018
-
10. Propriedades mecânicas e bioativas do compósito PVDF-BCP
Resumo Um biocompósito cerâmico/polimérico com alto potencial para aplicações práticas multifuncionais em engenharia de tecidos ósseos foi sintetizado usando o conhecido polímero piezoelétrico, fluoreto de polivinilideno (PVDF), e a cerâmica altamente bioativa, fosfato de cálcio bifásica (BCP), obtida a partir de ossos de peixes reciclados. Uma a
Cerâmica. Publicado em: 2018-09
-
11. Estudio de los parámetros de proceso del anodizado por plasma químico en Ti-6Al-4V ELI para implantes dentales
ABSTRACT In order to study the variation effect of some parameters of micro-arc oxidation process (MAO) on Ti-6Al-4V samples for dental implants, several treatments were carried out under different conditions of current density, exposure time and electrolyte chemical composition. These processes resulted in generated bioactive titanium oxide surface coatings
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Fabricación de recubrimientos compuestos de Bioglass®/poli(ɛ-capro-lactona) obtenidos por co-deposición electroforética sobre acero inoxidable
ABSTRACT In this work two kinds of "soft coatings" were obtained by co-electrophoretic deposition technique (co-EPD). In all cases a bioglass was used as inorganic phase, and a commercial poly(ɛ-caprolactone), (PCLC), and an anionic synthesized PCL modified with maleic anhydride (PCLS) were used as organic phase. To ensure an adequate coating over the metal
Matéria (Rio J.). Publicado em: 19/07/2018