Estudio de los parámetros de proceso del anodizado por plasma químico en Ti-6Al-4V ELI para implantes dentales

AUTOR(ES)

Azpeitia, Anahí, Lemos, Adriana, Kang, Kyung W., Llorente, Carlos

FONTE

Matéria (Rio J.)

DATA DE PUBLICAÇÃO

19/07/2018

RESUMO

ABSTRACT In order to study the variation effect of some parameters of micro-arc oxidation process (MAO) on Ti-6Al-4V samples for dental implants, several treatments were carried out under different conditions of current density, exposure time and electrolyte chemical composition. These processes resulted in generated bioactive titanium oxide surface coatings enriched in calcium and phosphorus. The MAO treatment was perfomed from two starting surface conditions: machining and blasting. After each MAO treatment, an alkali treatment was performed to evaluate its influence on the bioactivity of the coating obtained. The surfaces were characterized by means of topographic analysis with scanning electron microscopy, coating adhesion from Rockwell-C standard test and bioactivity in a simulated body fluid test (SBF). The best results (uniform and bioactive coatings with satisfactory performance in the adhesion assay) were attained with longer treatment times and in phosphoric-sulfuric and potassium diacid phosphate electrolytes. Furthermore, the results showed that the blasting treatment previous to MAO process enhanced the coating adhesion while a subsequent alkaline treatment improved MAO bioactivity.

Documentos Relacionados

• Optimización del proceso de soldadura GTAW en placas de Ti6Al4V
• Liberação in vivo de íons metálicos por mini-implantes ortodônticos de Ti-6Al-4V
• Evolución Microestructural en Uniones de la Aleación Ti-6Al-4V Mediante el Proceso de Soldadura de Punto por Fricción-agitación
• Avaliação das características de superfície das ligas de Ti-6Al-4V e Tilite usadas para "abutments" de implantes
• Fatigue behavior and physical characterization of surface-modified Ti-6Al-4V ELI alloy by micro-arc oxidation