Rotor Flux
Mostrando 1-12 de 22 artigos, teses e dissertações.
-
1. Methodology to Generate a Reluctance Network Applied to Permanent Magnet Synchronous Generators
Abstract This paper presents a methodology for the generation of a static reluctance network, with magnetomotive sources only in the rotor, applied in the analysis and design of surface mounted permanent magnet synchronous generators. In the analysis stage, this network can provide the magnetic flux in several points of the generator, enabling an estimate of
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Magnetic topology with axial flux concentration: a technique to improve permanent-magnet motor performance
Abstract This article presents a different topology for the magnetic circuit of permanent-magnet motors, using the concept of Axial Flux Concentration. By means of longitudinal extension of the rotor length beyond the stator core, a substantial increase in the flux per pole is enabled, improving the general performance of the machine. Even in low cost motors
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-12
-
3. Detection and analysis of rotor faults in induction motors by the measurement of the stray magnetic flux
This paper presents measured data and electromagnetic FEM field calculations as techniques for detecting and analyzing eccentricity in three-phase induction motors. Also it presents experimental results for detecting broken bars in induction motor rotors. A search-coil is used as magnetic field sensor to measure the stray magnetic flux outside the motor. It
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2012-06
-
4. Vector control of a single-phase induction motor / Controle vetorial do motor de indução monofásico
The objective of this work is to study the rotor flux vector control applied to a single-phase induction motor drive. Initially, a mathematical model of the motor will be derived. The motor equations will be transformed to the stationary reference frame so that the angular dependency due to the asymmetry of the motor variables is eliminated. Then is discusse
Publicado em: 2008
-
5. Controle vetorial de velocidade de um motor de indução trifásico com estimação neural de fluxo
This work describes the study and the implementation of the speed control for a three-phase induction motor of 1,1 kW and 4 poles using the neural rotor flux estimation. The vector speed control operates together with the winding currents controller of the stator phasis. The neural flux estimation applied to the vector speed controls has the objective of com
Publicado em: 2008
-
6. Acionamento vetorial de motores de indução trifásicos com enfraque-cimento de campo e maximização do conjugado por ampère
This work investigates the operation of three phase induction motors in field weakening and high speed regions. Maximum torque per ampère is imposed by using an indirect vector control strategy. Mathematical models that accounts for magnetic saturation is used for simulations and adjustment of controllers used in control algorithm. The driving structure is
Publicado em: 2008
-
7. Controle do fluxo de potencia do gerador de indução duplamente alimentado funcionando na velocidade subsincrona / Power flux control of doubly fed induction generator operating at sub-synchronous speeds
Esta tese trata da implementação do controle do fluxo de potência de um gerador de indução duplamente alimentado conectado ao barramento infinito. A orientação de fluxo do estator é utilizada, pois permite o controle, de forma independente, das potências ativa e reativa do estator, por meio das componentes de eixo direto e em quadratura da corrente
Publicado em: 2008
-
8. Desenvolvimento de um atuador magnetico para excitação sem contato de sistemas rotativos / A magnetic actuator development for contactless excitation in rotor systems
A magnetic actuator as excitation source in rotating systems is developed, in order to accomplish modal analysis and other studies involving contacless excitation. Although the use of magnetic systems to apply forces onto rotating machinery has been carried out with high performance level (for example, magnetic bearings), the development of a conveniently ea
Publicado em: 2008
-
9. Experimental performance evaluation of magnetic actuator used in rotating machinery analysis
A magnetic actuator as excitation source in rotative systems is proposed, in order to accomplish modal analysis without contact between the actuator and the rotor. Although the use of electromagnets for applying forces to rotating machinery have been carried out with high performance level (for example, magnetic bearings), the development of a conveniently e
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2007-03
-
10. Algoritmo preditivo baseado em modelo aplicado ao controle de velocidade do motor de indução / Speed control of induction motor using predictive algorithm
This thesis presents the results concerning the control of rotor flux and speed of the induction motor using MBPC strategy, which is based on the error minimization between the future set point and model prediction, resulting in control signals. In the case studied in this thesis the motor model is described in space-state. The non linear MBPC emploies searc
Publicado em: 2007
-
11. Monitoramento permanente de motores de indução trifasicos / On-line monitoring of three-phase induction motors
A predictive maintenance program must include several techniques of monitoring of the electric motors conditions. Among these techniques, probably the two most classic ones are related to electric current and vibration analysis. Unfortunately, in both cases inherent drawbacks make difficult their use in loco on industry plants. As there is a large range of
Publicado em: 2007
-
12. Controle vetorial de velocidade de uma máquina de indução sem mancais trifásica com bobinado dividido utilizando estimação neural de fluxo / Vector Speed Control for a Three-Phase Bearingless Induction Machine with Divided Winding using Neural Flux Estimation
Este trabalho descreve o estudo e a implementação do controle vetorial de velocidade de uma máquina de indução sem mancais trifásica com bobinado dividido de 4 pólos e 1.1kW utilizando estimação neural de fluxo do rotor. O controle vetorial de velocidade opera em conjunto com os controles de posicionamento radial e das correntes nos enrolamentos de
Publicado em: 2007