Desenvolvimento de um atuador magnetico para excitação sem contato de sistemas rotativos / A magnetic actuator development for contactless excitation in rotor systems
AUTOR(ES)
Rogerio Mendonça Furtado
DATA DE PUBLICAÇÃO
2008
RESUMO
A magnetic actuator as excitation source in rotating systems is developed, in order to accomplish modal analysis and other studies involving contacless excitation. Although the use of magnetic systems to apply forces onto rotating machinery has been carried out with high performance level (for example, magnetic bearings), the development of a conveniently easy and simples device for laboratory application presents interesting contribution to experimental methods used in test rigs based on similarity design to rotating machinery. The initial concept of the magnetic actuator proposed here is simple, but enables either the external excitation without contact or the vibration control when associated with a controller system. However, the performance characteristics tunning to attend the dynamic demand of the system is not so trivial. Following this focus, the work brings practical experience and discussion about the development and performance analysis of a magnetic actuator used for rotating machinery tests. The influence of the electrical current in the actuator coils, the air-gap between actuator and rotative system, thetype of surface of the actuator poles (flat or curved) as well as excitation frequency was verified. Force estimation was based on the magnetic flux density, measured by hall sensors
ASSUNTO(S)
magnetic actuators rotores - dinamica rotating machinery dispositivos magneticos modal analysis analise modal contactless excitation
ACESSO AO ARTIGO
http://libdigi.unicamp.br/document/?code=000436204Documentos Relacionados
- DESIGN OF A WIRELESS SENSOR/ACTUATOR NODE FOR STREET LIGHTING SYSTEM MANAGEMENT
- Desenvolvimento de um atuador de posição baseado em liga de memória de forma com resfriamento forçado.
- DEVELOPMENT OF A CAPILLARY ELECTROPHORESIS SYSTEM WITH CONTACTLESS CONDUCTIVITY DETECTION (C4D) FOR THE SEPARATION OF INORGANIC IONS
- Development of an external electroosmotic flow control system for capillary electrophoresis with contactless conductivity detection
- Control of the breathing mechanism of a cracked rotor by using electro-magnetic actuator: numerical study