Rotor Flux
Mostrando 13-22 de 22 artigos, teses e dissertações.
-
13. Controle do fluxo de potencia da maquina de indução duplamente alimentada / Control of the power flux of the doubly fed induction machine
O objetivo deste trabalho é estudar o modelo da máquina de indução duplamente alimentada no sistema de referência síncrono, bem como controlar seu fluxo de potências através de orientação de fluxo. São analisadas as orientações de fluxo de estator, de entreferro e de rotor em várias operações: compensador de reativos, gerador e motor, com fat
Publicado em: 2006
-
14. Identificação on-line de motores de indução através de modelo discreto para sinais senoidais
In this work are developed two on-line identification methods for three-phase induction motors based on discrete models obtained when we consider continuous systems excited by sinusoidal signals. The first method uses the discrete model of the homopolar machine in the stationary frame to estimate the stator resistance and the stator dispersion inductance and
Publicado em: 2006
-
15. CONTRIBUIÇÃO AO ESTUDO DA MÁQUINA ASSÍNCRONA TRIFÁSICA DUPLAMENTE ALIMENTADA APLICADA A AEROGERADORES DE VELOCIDADE VARIÁVEL
This work presents the analysis and implementation of a vector control applied to Doubly-Fed Induction Generators (DFIG) used in grid connected wind turbines. DFIGs are nowadays the more widely used concept for grid connected wind turbine, especially for rated power above 1 MW. The main reason is the low rotor PWM power converter rating. The present work dea
Publicado em: 2006
-
16. Detecção e diagnóstico de falhas em motores de indução
This main purpose of this work is to design and implement a system to detect and diagnose electrical faults (stator inter-turn short circuit and broken rotor bars) and mechanical faults (unbalance and shaft misalignments) for three phase induction machines. This approach starts by obtaining the best patterns for fault detection and symmetrical models for the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/07/2005
-
17. WIND TURBINE: MODELING, ANALYSIS AND CONTROL OF DOUBLY FED INDUCTION GENERADOR / TURBINAS EÓLICAS: MODELO, ANÁLISE, E CONTROLE DO GERADOR DE INDUÇÃO COM DUPLA ALIMENTAÇÃO
This thesis presents the main concepts and configurations used in wind turbine connected to the grid, as well as, an analysis, design and implementation of the control system for the Doubly Fed Induction Generator (DFIG). The DFIG has been selected since it is the concept frequently adopted by the wind turbine manufactures. In the thesis, it is presented a m
Publicado em: 2004
-
18. A STRATEGY MRAC WITHOUT SENSOR OF SPEED FOR TUNNING OF THE CONTROL WITH ORIENTATION FOR THE FIELD OF INDUCTION ENGINES / UMA ESTRATÉGIA MRAC SEM SENSOR DE VELOCIDADE PARA SINTONIA DO CONTROLE COM ORIENTAÇÃO PELO CAMPO DE MOTORES DE INDUÇÃO
Na maioria das aplicações industriais de acionamentos com alto desempenho ca são utilizadas. No entanto, este tipo de acionamento depende fortemente de um controle de corrente eficiente e do tipo de estratégia de controle utilizada. Portanto, neste trabalho é realizado um estudo dos principais controladores PI de correntes usados em correntes ca e é pr
Publicado em: 2003
-
19. Predictive accompaniment of three-phase induction motors by magnetic flux analysis / Acompanhamento preditivo de motores de indução trifasicos atraves da analise de fluxo magnetico
Um programa de manutenção preditiva deve englobar várias técnicas de monitoramento da condição do motor elétrico. Dentre elas, pode-se citar como clássicas, a análise de corrente elétrica e análise de vibrações. Entretanto, existe um grande número de dificuldades associadas com estas técnicas e, conseqüentemente, com suas aplicações prátic
Publicado em: 2003
-
20. Flux estimation and field oriented control of induction motors.
Na presente tese à apresentado o projeto completo de um observador de fluxo magnÃtico (determinÃstico, discreto e assintoticamente estÃvel) aplicado ao sistema de controle realimentado de um servo acionamento baseado no motor de induÃÃo. Uma vez que o modelo reduzido do motor de induÃÃo, alÃm de vÃrios outros tipos de sistemas fÃsicos, à represen
Publicado em: 2002
-
21. Implementação digital utilizando DSP do controle por orientação do fluxo do rotor : metodos direto e indireto
In this work the digital implementation of a field rotor flux oriented based control of a squirrel cage induction motor, using a versatile Motorola 56001 digital signal processor is presented. Two methods of orientation are studied: the direct and indirect. The control system contains a PI speed controller. An introductory investigation of the use of Genetic
Publicado em: 1999
-
22. Modelamento e observador discretos não-estacionarios para a maquina de indução
In this work a procedure is proposed for obtaining a discrete state model for the indudion machine based on the two-axis continuous model. The performance of the discrete model is then discussed; it is compared to the continuous modeI and to the discrete model obtained through Euler s method. Next, the proposed discrete model is applied in the design and imp
Publicado em: 1992