Resistive Furnace
Mostrando 1-10 de 10 artigos, teses e dissertações.
-
1. Obtenção de fios em ligas cobre-magnésio para utilização em linhas de transmissão de energia elétrica / Obtention of copper-magnesium alloys wires used in eletrical transmission lines
O objetivo desse trabalho foi o de obter-se fios de cobre em três composições químicas distintas da liga Cu-Mg a partir de cobre eletrolítico e de magnésio. Foram avaliadas as etapas envolvidas, começando com a fusão de botões em forno a arco na composição do eutético Cu-Mg, diluição destes botões em forno resistivo, vazamento em lingoteira de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/07/2010
-
2. Estudo da síntese e sinterização de pós compósitos do sistema Ta-Cu
Ta-Cu bulk composites combine high mechanical resistance of the Ta with high electrical and thermal conductivity of the Cu. These are important characteristics to electrical contacts, microwave absorber and heat skinks. However, the low wettability of Ta under Cu liquid and insolubility mutual these elements come hard sintering this composite. High-energy mi
Publicado em: 2008
-
3. Estudo da evolução das inclusões do Aço SAE 8620 com o tratamento de inclusões com cálcio em escala laboratorial
O tratamento de inclusões com cálcio é uma ferramenta poderosa para a produção de aços mais limpos e com melhores propriedades mecânicas. A simulação em laboratório do processo industrial tem sua importância na possibilidade de estudar as reações e interações químicas do tratamento de inclusões no aço líquido. Esse tipo de estudo é possí
Publicado em: 2008
-
4. Materiais hÃbridos formados por nanofilmes moleculares depositados sobre nanofilmes metÃlicos produzidos por processo bottom-up em substratos vÃtreos para uso como parte ativa de nanodispositivos
In the present work we are investigating a hybrid systems formed by a thermally evaporated molecular nanofilm of rare earth complex over a metallic thin film obtained by a bottom-up process. To produce the new hybrid, we have deposited the photonic Eu(btfa)3bipy complex on a glassy substrate containing a silver nanostructured film formed by thermal reduction
Publicado em: 2008
-
5. Comparative study of porosity and pores morphology of unalloyed iron sintered in furnace and plasma reactor
Samples of unalloyed iron were sintered in the presence of an abnormal glow discharge using a confined anode-cathode configuration. The samples were placed on a holder acting as the discharge anode inside an AISI 1020 steel hollow cathode. Heating of the outer cathode was obtained by the bombardment of ions and energetic neutral particles. As a consequence o
Materials Research. Publicado em: 2007-03
-
6. Determinação do perfil térmico em amostras de aço AISI M35 imersas em plasma
The heat transfer between plasma and a solid occurs mostly due the radiation and the collision of the particles on the material surface, heating the material from the surface to the bulk. The thermal gradient inside the sample depends of the rate of particles collisions and thermal conductivity of the solid. In order to study that effect, samples of AISI M35
Publicado em: 2007
-
7. The study of the magnetocaloric effect in compounds of MnAs1-xAx, A = P, Sb, Te e Mn1-xFexAs / Estudo do efeito magnetocalorico em compostos de MnAs1-xAx, A = P, Sb, Te e Mn1-xFexAs
In this work we describe the obtaining processes of the MnAs1-x Ax (A= Te, P, Sb) and Mn1-xFexAs series for several concentrations. We divided this work in two stages: in the first one the samples were obtained using a high pressure furnace and in the second one using a resistive furnaces with the samples sealed in quartz tubes. The first stage, can be split
Publicado em: 2006
-
8. Manufacturing of metallic porous structures to be used in capillary pumping systems
Sintered metallic porous structures have an application as capillary structures in two-phase heat transfer loops. In this work the manufacturing procedure of tubular porous structures for capillary pump application is discussed. The application of porous structures on capillary pumping systems requires porosity higher than 40% and pore size diameter lower th
Materials Research. Publicado em: 2003-12
-
9. Resistividade elétrica de cerâmicas de alumina a temperatura ambiente e a 600oC / Electrical resistivity of alumina at room temperature and 600oc
Alumina (Al2O3) ceramic specimens have been prepared via traditional ceramic process, namely, powder analyses, classification and conditioning, uniaxial cold pressong and sintering. DC electrical resistivity measurements has been carried out at RT and 600oC. A tubular resistive furnace with an alumina sample chamber with platinum leads and electrodes was use
Publicado em: 1992
-
10. Implementação de controle digital PID com microcomputador
The objective of this work is the development of a Proportional-Integral-Derivative (PID) temperature controller, which uses a microcomputer developed in the Laboratory for Instrumentation of the IFGW-UNICAMP. This controller was tested an electric furnace which resistive heating. The system achieves a precision 0.3 ºC at a temperature of 900 ºC. Two inter
Publicado em: 1985