Reinforcement
Mostrando 1-12 de 882 artigos, teses e dissertações.
-
1. Mesh reinforcement in masonry mortar coatings: a systematic literature review
Abstract Mortar coatings have a major influence on a building’s aesthetics, valorization, and habitability, with significant effects on the mechanical behavior of masonry walls. Multiple types of meshes can be embedded in plaster to enhance both masonry and coating’s mechanical behavior, restrain crack formation, enhance the bonding between layers, and i
Cerâmica. Publicado em: 2023
-
2. Mullite macro-needles for reinforcement of refractory castables
Abstract Ceramic macro-needles incorporation as reinforcement in commercial refractory castable was studied. Ceramic macro-needles (Ø2x20 mm) were made from kaolinite clay and gibbsite to obtain mullite as the main crystalline phase. Specimens with the ceramic reinforcement were evaluated by compression after being treated at two temperatures (815 and 1400
Cerâmica. Publicado em: 2022
-
3. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
4. Optimum design of steel columns filled with concrete via genetic algorithm: environmental impact and cost analysis
Abstract The use of concrete-filled tubular columns as part of structural systems has steadily increased throughout the years. The growing demand for structural elements of this nature is a direct result of the possibility to use various cross-section shapes that have increased strength, along with resistance to fire and other corrosive agents. The main obje
REM - International Engineering Journal. Publicado em: 2022
-
5. Effects of the addition of graphene on the compressive strength of geopolymeric mortar developed from k-feldspar mining waste
Abstract Contemporary organizations are showing a growing interest in the reuse of solid waste from industrial processes with the intention of reducing environmental impacts and reducing costs. The mining activity is one of the main waste generators in Brazil. In parallel, geopolymeric materials have been gaining prominence in studies that make it a possible
REM, Int. Eng. J.. Publicado em: 2021-09
-
6. Obsessive-compulsive disorder reinforcement during the COVID-19 pandemic
Abstract The COVID-19 pandemic is unquestionably impacting on the mental health of the population worldwide. Fear of contamination can both increase levels of stress in healthy individuals and intensify psychiatric symptoms in patients with pre-existing conditions, especially obsessive-compulsive disorder (OCD). During the COVID-19 pandemic, the imminent ris
Trends Psychiatry Psychother.. Publicado em: 2021-06
-
7. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
8. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
9. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
10. Study of the interaction of concrete walls with the foundation structure
Abstract This article presents a study of the factors that influence the mechanism of soil-structure interaction with a pilot building having concrete walls and their impact on their performance. To illustrate the studies carried out, a numerical modeling of a four-floor concrete wall pilot building was performed, subjected to vertical actions, supported by
REM, Int. Eng. J.. Publicado em: 2021-06
-
11. COVID-19 pandemic in São Paulo: a quantitative study on clinical practice and mental health among medical residency specialties
ABSTRACT BACKGROUND: 2020 was a challenging year for all healthcare professionals worldwide. In São Paulo, Brazil, the virus SARS-CoV-2 took 47,222 lives up to December 29, 2020. The front line of medical professionals in São Paulo was composed of many residents, who were transferred from their rotations to cover the needs of the pandemic. OBJECTIVE: To
Sao Paulo Med. J.. Publicado em: 2021-05
-
12. Flexible pavement overlay design of UFJF ring road based on the new Brazilian mechanistic-empirical pavement design method
Abstract The procedures for design and reinforcement projects regarding flexible pavements available in Brazil are mostly based on empirical models developed from studies carried out in specific localities, and therefore, should only be used in cases where equivalent climatic and traffic conditions are observed. The national highway agencies in partnership w
REM, Int. Eng. J.. Publicado em: 2020-12