Flexible pavement overlay design of UFJF ring road based on the new Brazilian mechanistic-empirical pavement design method

AUTOR(ES)
FONTE

REM, Int. Eng. J.

DATA DE PUBLICAÇÃO

2020-12

RESUMO

Abstract The procedures for design and reinforcement projects regarding flexible pavements available in Brazil are mostly based on empirical models developed from studies carried out in specific localities, and therefore, should only be used in cases where equivalent climatic and traffic conditions are observed. The national highway agencies in partnership with universities and research centers have been working to change this scenario through the development of a mechanistic-empirical method that is more compatible with the Brazilian geographic and technical-scientific realities. The first outcome of this task force is the computer program MeDiNa, which is still under assessment. In this present study, the new flexible pavement software in Brazil (MeDiNa) was used by the Federal University of Juiz de Fora to calculate the overlay asphalt of its the ring road, aiming to recover its functional proprieties. This pavement was evaluated functionally by Computerized Continuous Visual Survey (CCVS) and tests of longitudinal cracks, and structurally by survey deflection measurements (FWD) and shaft sinking. With the data collected from the structural evaluation, the homogeneous segmentation of the stretch and the back-calculation of the data was carried out, aimed at the acquisition of needed parameters for the calculation. After the appropriate design, it was concluded that the best solution for the overlay is resurfacing along its entire length, with the use of the project’s asphalt mixture with single thickness of 5.0 cm, observing the application of the anti-reflective cracking layer in some stretches.

Documentos Relacionados