Precipitates
Mostrando 1-12 de 464 artigos, teses e dissertações.
-
1. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
2. On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys
Abstract The mechanical properties of age-hardenable aluminum alloys are strongly influenced by the volume fraction, size and spacing of hardening precipitates. In addition, researches have shown that interrupted ageing (T6I4) could benefit the hardening response of these alloys. Interrupted ageing is a term generally used for the microstructural developmen
REM, Int. Eng. J.. Publicado em: 2021-01
-
3. MECANISMO DE EVOLUÇÃO DE HIDROGÊNIO DURANTE A CORROSÃO DA LIGA 2198-T8 EM MEIO CONTENDO CLORETO: UMA ABORDAGEM ELETROQUÍMICA
Corrosion is still one of the most serious and frequent problems in industries. The phenomena involved in the corrosion mechanism of Al-alloys may be explained by formation of galvanic cells between the metal matrix and heterogeneities, such as precipitates, intermetallic phases leading to potential differences and electrochemical reactions. In the cathodic
Quím. Nova. Publicado em: 2020-09
-
4. Influence of the pH regulator on the dolomite hydrophobization process
Abstract A study was carried out to investigate the combined effect of released ions in the pulp by pH regulator and mineral surface on dolomite flotation. The tests were carried out using a dolomite sample in a bench flotation cell with automatic froth remover. Zeta potential measurements, solution conductivity and FTIR analysis were done to support the int
REM, Int. Eng. J.. Publicado em: 2020-09
-
5. Effect of titanium and nitrogen inoculation on the microstructure, mechanical properties and abrasive wear resistance of Hadfield Steels
Abstract The effect of titanium and nitrogen addition on Hadfield steels was investigated. In order to do this, two grades of steels were produced in terms of titanium and nitrogen addition. The final samples had their microstructure characterized and their mechanical properties were evaluated by uniaxial tensile and Charpy impact tests. Furthermore, the wea
REM, Int. Eng. J.. Publicado em: 2020-03
-
6. Microstructure and Thermal Analyses of Cu87-xAl13Nbx High-Temperature Shape Memory Alloys
This paper presents a thermal and microstructural characterization of Cu87-xAl13Nbx (wt%) high temperature shape memory alloys (HTSMA), with Nb contents ranging from 1 to 3%. The alloys were obtained by arc melting under argon atmosphere. Thermal characterization was performed by differential scanning calorimetry (DSC), revealing that the phase martensitic t
Mat. Res.. Publicado em: 28/11/2019
-
7. Corrosion Resistance of Cu-Alloyed Precipitation Hardenable Duplex Stainless Steel ASTM A890 Grade 1B
Duplex stainless steels (DSS) are corrosion resistant alloys largely used in chemical and petrochemical industries. Some commercial DSS contain 0.5-1.0% copper addition to improve the corrosion resistance by reducing the corrosion rate in non-oxidizing environments. Higher copper addition (≥ 2%) can also hard by precipitation, especially when fine copper p
Mat. Res.. Publicado em: 07/11/2019
-
8. Phase Separation and Development of the Microstructure for Stainless Steel to Copper Alloy Weld Joints Using a Fiber Laser
ABSTRACT Stainless steel and copper alloys joints are often applied in aerospace, marine and power industries where both high thermal and electrical conductivity (Cu) and corrosion resistance (steel) are required. In the aerospace industry, in particular for the combustion chamber of rocket engines, copper and steel combinations offer perfect materials selec
J. Aerosp. Technol. Manag.. Publicado em: 10/10/2019
-
9. STABILITY AND TOXICITY PROFILE OF SOLUTION ENHANCED DISPERSION BY SUPERCRITICAL FLUIDS (SEDS) FORMULATED Andrographis paniculata EXTRACT
Abstract The main objective was to evaluate the stability and toxicity of a Solution Enhanced Dispersion by Supercritical Fluids (SEDS) formulated A. paniculata extract that was intended for food applications. The best formulated SEDS A. paniculata extract with improved dissolution of andrographolide (data not shown) was obtained using 25 mg/mL A. paniculata
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
10. Evaluation of two-step transformation in Ni-rich titanium-nickel alloys using thermal and internal friction analyses
ABSTRACT The use of Ti-Ni memory alloys covers several fields of application such as medicine, dentistry, actuators, sensors among others. Because of the thermomechanical behavior of these materials, they are an object of continuous studies and their properties are related to the occurrence of thermoelastic martensitic phase transformations. The thermal anal
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Carregamento e caracterização do fármaco carboplatina na microestrutura microporosa do biomaterial granulado bifásico micro e nanoestruturado de fosfato de cálcio
RESUMO As biocerâmicas bifásicas hidroxiapatita/fosfato tricálcico-beta (HA/TCP-β) microporosas são pesquisadas e se destacam em aplicações biomédicas como substitutos dos tecidos ósseos. Estes biomateriais são biocompatíveis e apresentam microestruturas microporosas interconectadas, que permitem sua utilização no reparo do tecido ósseo. Devido
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Effects of Aging Temperature, Time, and Pre-Strain on Mechanical Properties of AA7075
Aluminum alloys of the 7xxx series (AA7075) are preferred in the aerospace and automotive industries due to their low densities, high strength, good corrosion resistance properties. Additionally, these alloys show the most effective aging properties among aluminum alloys. For this reason, it is very important to determine the most appropriate aging parameter
Mat. Res.. Publicado em: 12/09/2019