Precipitates
Mostrando 13-24 de 464 artigos, teses e dissertações.
-
13. Microstructural Adjustments and Tensile Properties of a Hot-Forged Ti−22Al−23Nb−3V−Y Alloy
Microstructures and tensile properties of a hot forged Ti−22Al−23Nb−3V−Y alloy were investigated systematically. Different heat treatments were performed to adjust the wrought microstructure to optimize tensile properties. It was found that features of O phase precipitates and its volume fraction was rather sensitive to the cooling rate after the sol
Mat. Res.. Publicado em: 19/08/2019
-
14. Influence of Mechanical Cycling on Residual Strain in Superelastic Cu-Al-Be-Nb Alloys
The understanding of the stabilization mechanism of martensite used to obtain alloys with high hysteresis and the possibility of recovering this martensite (residual strain) by heating at temperatures higher than As and Af have been fundamental for application in bonding devices. One of the possibilities to enhance residual strain is through mechanical cycli
Mat. Res.. Publicado em: 15/07/2019
-
15. Anterior uveitis as a manifestation of ocular tuberculosis
RESUMO A tuberculose (TB) é uma doença infecciosa de grande magnitude no mundo. Dos pacientes com doença extrapulmonar, as manifestações oculares são raras, mas entre os casos relatados, a manifestação ocular mais comum é a uveíte. O diagnóstico de TB ocular deve ser feito o mais precoce possível para que o tratamento seja iniciado e os riscos de
Rev. bras.oftalmol.. Publicado em: 01/07/2019
-
16. Microstructure evolution during the extrusion of a 6351 aluminum alloy tube
Abstract The aluminum alloy AA 6351 is a precipitation hardened alloy of the Al-Mg-Si system, additionally containing Mn and Fe. In this study, the microstructural characterization during processing of a thick wall extruded AA 6351 tube was carried out. Several complementary techniques for microstructural characterization were used, such as polarized light o
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
17. On the mechanical behavior of an Al 7075 alloy deformed by asymmetrical and conventional rolling
ABSTRACT Samples of the Al 7075 naturally and artificially aged were processed by conventional and asymmetrical rolling with 5% of thickness reduction. The rolling processes were evaluated under room temperature and under warm condition (130°C). Mechanical properties were evaluated by uniaxial tensile and Vickers microhardness tests. Microstructure evolutio
Matéria (Rio J.). Publicado em: 20/05/2019
-
18. Nitretação a plasma da junta soldada do aço inoxidável super duplex SAF 2507
RESUMO Os aços inoxidáveis superduplex (AISD) apresentam em sua microestrutura as fases ferrita e austenita, de modo a conciliar boas propriedades mecânicas e de resistência à corrosão. Estes materiais possuem grande aplicação na indústria de extração de petróleo e na petroquímica. Quando estão sujeitos a estas aplicações, os dutos de AISD so
Matéria (Rio J.). Publicado em: 20/05/2019
-
19. Carregamento e caracterização do fármaco carboplatina na microestrutura microporosa do biomaterial granulado bifásico micro e nanoestruturado de fosfato de cálcio
RESUMO As biocerâmicas bifásicas hidroxiapatita/fosfato tricálcico-beta (HA/TCP-β) microporosas são pesquisadas e se destacam em aplicações biomédicas como substitutos dos tecidos ósseos. Estes biomateriais são biocompatíveis e apresentam microestruturas microporosas interconectadas, que permitem sua utilização no reparo do tecido ósseo. Devido
Matéria (Rio J.). Publicado em: 20/05/2019
-
20. Influência do Ciclo Térmico de Soldagem no Crescimento de Grão, nas Transformações Microestruturais e na Formação de MA na GGZAC de aço TMCP
Resumo A soldagem com elevado aporte térmico é uma das alternativas adotadas pelos estaleiros e fabricantes de torres eólicas para aumento da produtividade. No entanto, os ciclos térmicos gerados no processo podem provocar transformações microestruturais prejudiciais à tenacidade na zona afetada pelo calor, especialmente na região de grãos grosseiro
Soldag. insp.. Publicado em: 09/05/2019
-
21. Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites
This work highlights the relationship between the preparation, crystallization behavior, microstructures, and mechanical properties of Cu-based bulk metallic glasses (BMGs) and their composites (BMGCs). (Cu47Zr45Al8)97.5Y1.5Nb in-situ BMGCs were prepared using isothermal annealing, and the experimental results indicate tunable mechanical properties of the al
Mat. Res.. Publicado em: 06/05/2019
-
22. Effect of Sn Addition in the Microstructure Refinement and Corrosion Resistance of Cu-Zr-Al-Ag Alloy
In this paper, a composition of known high glass-forming ability, Cu42Zr42Al8Ag8 and a novel Cu42Zr42Al8Ag4Sn4, were produced by suction-casting. After rapid solidification of both alloys, X-ray diffraction patterns along with crystallite size estimation by Scherrer equation and scanning electron microscopy images revealed a refined microstructure, composed
Mat. Res.. Publicado em: 04/04/2019
-
23. The Influence of Isothermal Holding Times on Microstructural Evolution of X90 Linepipe Steel
Microstructural phase of linepipe steels depends on different isothermal conditions. Thermal cycling testing of X90 linepipe steel was conducted using a thermomechanical simulator. The results have shown that with increased holding time, the microstructure constituents change from the martensite and bainitic ferrites to granular bainite and polygonal ferrite
Mat. Res.. Publicado em: 28/03/2019
-
24. Microstructure and Properties of 3D Printed Inconel 718 Joint Brazed with BNi-2 Amorphous Filler Metal
Three dimensional (3D) printing technology has been widely used in metal manufacturing industry. This study focused on the vacuum brazing of 3D printed Inconel 718 superalloy with BNi-2 amorphous filler metal. Interfacial microstructure and element distribution revealed excellent wettability and spreadability of the filler metal as well as favorable brazabil
Mat. Res.. Publicado em: 14/11/2018