Porous Media
Mostrando 1-12 de 176 artigos, teses e dissertações.
-
1. Numerical Simulation of Two-Phase Flows in Heterogeneous Porous Media
RESUMO Neste trabalho apresentamos simulações numéricas tridimensionais do escoamento bifásico (água-óleo) em meios porosos com o objetivo de analisar a influência das heterogeneidades nos campos de porosidade e permeabilidade e, principalmente, suas relações, sobre o fenômeno conhecido na literatura como dedos viscosos (viscous fingering). Para is
TEMA (São Carlos). Publicado em: 2020-08
-
2. Numerical Study for Two-Phase Flow with Gravity in Homogeneous and Piecewise-Homogeneous Porous Media
RESUMO Neste trabalho estudamos o escoamento bifásico com gravidade em meios homogêneos de 1-rocha ou em meio composto de 2-rochas, estes fenômenos podem ser modelado por uma lei de conservação escalar não-linear com funçãao de fluxo contínua ou função de fluxo descontínua, respectivamente. Nosso estudo é essencialmente de um ponto de vista num�
TEMA (São Carlos). Publicado em: 2020-04
-
3. PHYSICAL AND THERMAL PROPERTIES OF EUCALYPTUS WOOD CHARCOAL.
ABSTRACT The knowledge of the physical and thermal properties of eucalyptus charcoal is of fundamental importance in the design of equipment and development of cooling technologies. However, literature about physical properties for eucalyptus wood charcoal is largely unavailable, especially the thermal and aerodynamic properties, for the same material. The a
CERNE. Publicado em: 2020-03
-
4. Matriz porosa do BV60S associada a células osteoprogenitoras alógenas no tratamento de defeitos ósseos críticos em rádios de cães
RESUMO O objetivo do estudo foi avaliar o efeito da matriz porosa do biovidro 60S (BV60S) associada a células osteoprogenitoras (CO) alógenas no tratamento de defeitos ósseos críticos de cães. Foram utilizados 20 cães, machos, sem raça definida, com dois anos de idade e massa corporal média de 25kg. Com os cães sob anestesia geral, foram criados def
Arq. Bras. Med. Vet. Zootec.. Publicado em: 10/10/2019
-
5. Materiais porosos e imagens: uma introdução
Resumo A investigação sobre meios porosos tem crescente demanda em parte da comunidade científica atual e busca o aperfeiçoamento das técnicas conhecidas desse tipo de caracterização, assim como o desenvolvimento de novas tecnologias, das quais podemos citar a análise de imagens. Neste trabalho, propomos uma introdução de algumas ideias que transit
Rev. Bras. Ensino Fís.. Publicado em: 04/02/2019
-
6. Design and analysis of different models of microfluidic devices evaluated in Enhanced Oil Recovery (EOR) assays
ABSTRACT Microfluidic devices are a new platform for Enhanced Oil Recovery (EOR) assays. The application of Colloidad Dispersion Gels (CDG) injection method has been proposed in recent years. However, the mechanism of oil recovery enhancement has not been completely elucidated. Its purpose is to mobilize oil by decreasing the permeability of channeled zones.
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Transverse permeability determination and influence in resin flow through an orthotropic medium in the RTM process
ABSTRACT Resin Transfer Molding (RTM) process is commonly used to produce high quality polymeric composites with simple or complex geometries in small to large sizes. In RTM process a preformed reinforcement is positioned inside the mold cavity. This dry reinforcement is actually a fibrous porous media whereby resin will flow. The mold is then closed and res
Matéria (Rio J.). Publicado em: 20/07/2017
-
8. Effect of drying method on mechanical, thermal and water absorption properties of enzymatically crosslinked gelatin hydrogels
ABSTRACT Enzymatically crossliked gelatin hydrogel was submitted to two different drying methods: air drying and freeze drying. The resulting polymeric tridimensional arrangement (compact or porous, respectively) led to different thermal and swelling properties. Significant differences (p < 0.05) on thermal and mechanical characteristics as well as swelling
An. Acad. Bras. Ciênc.. Publicado em: 04/05/2017
-
9. On the Validation of a Numerical Model for the Analysis of Soil-Structure Interaction Problems
Abstract Modeling and simulation of mechanical response of structures, relies on the use of computational models. Therefore, verification and validation procedures are the primary means of assessing accuracy, confidence and credibility in modeling. This paper is concerned with the validation of a three dimensional numerical model based on the finite element
Lat. Am. j. solids struct.. Publicado em: 2016-08
-
10. EFFECT OF NON-DARCY FLOW COEFFICIENT VARIATION DUE TO WATER VAPORIZATION ON WELL PRODUCTIVITY OF GAS CONDENSATE RESERVOIRS
Abstract Well productivity of gas condensate reservoirs is highly affected by near-wellbore phenomena. Inertial force resulting from convective acceleration of fluid particles in the medium, as well as viscous force, determines the flow of gas through porous media at high velocity. Pressure drop builds up the molar content of water in gas by water vaporizati
Braz. J. Chem. Eng.. Publicado em: 2015-03
-
11. A study on acoustic behavior of poroelastic media bonded between laminated composite panels
A study on the acoustic behavior of double-walled panels, with sandwiched layer of porous materials is presented within Classical Laminated Plate Theory (CLPT) for laminated composite panels. For this purpose, equations of wave propagation are firstly extracted based on Biot's theory for porous materials, then the transmission loss (TL) of the structure is e
Lat. Am. j. solids struct.. Publicado em: 2014
-
12. Photo-assisted electrochemical copper removal from cyanide solutions using porous TiO2 thin film photo-anodes
TiO2 porous films were prepared on ITO coated glass slides by the sol-gel dip-coating method assisted with Polyethylene glycol (PEG). The films were used as photo-anodes in the photo-assisted electrolytic removal of cuprous ions in cyanide media. These were characterized by SEM, UV-Visible spectroscopy and XRD. The PEG modified films were free of cracks and
Mat. Res.. Publicado em: 17/09/2013