Porous Media
Mostrando 13-24 de 176 artigos, teses e dissertações.
-
13. Estudo de propriedades petrofísicas de rochas sedimentares por Ressonância Magnética Nuclear / Petrophysical properties study of sedimentary rocks by Nuclear Magnetic Resonance
The Nuclear Magnetic Resonance (NMR) technique is one of the most versatile techniques for scientific research, specially for the study of dynamics, structure and conformational of materials. In particular, its application in oil science is one of its first routine applications. Methodologies developed specifically to match this scientific community proved t
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/05/2012
-
14. ESTUDO EXPERIMENTAL DA COMBUSTÃO DO GLP E GLICEROL RESIDUAL DERIVADO DA PRODUÇÃO DE BIODIESEL EM MEIOS POROSOS RADIANTE / EXPERIMENTAL STUDY OF LPG COMBUSTION OF GLYCEROL AND RESIDUAL DERIVED FROM BIODIESEL PRODUCTION IN RADIANT POROUS MEDIA
The increasing production of biodiesel has caused increased production of residue glycerol. The large amount of glycerin (our glycerol) in the market causes a surplus unusable commercially and industrially, which should give a correct destination. At this point, the porous combustion is characterized by burning within an inert medium, to the pollutants reduc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/05/2012
-
15. Estudo de cerâmicas porosas de alumina através da medida de tempos de relaxação via ressonância magnética nuclear / Characterization of porous alumina ceramics through measurement of nuclear magnetic resonance relaxation times
A medida de tempo de relaxação longitudinal (T1) e transversal (T2) de ressonância magnética nuclear (RMN) é muito utilizada para análise de meios porosos na área do petróleo. Esses tempos de relaxação estão relacionados com tamanho dos poros. As cerâmicas, dependendo da sua temperatura de sinterização, apresentam uma porosidade intrínseca, ma
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/03/2012
-
16. ProduÃÃo de Filmes Finos de SnO2 pelo MÃtodo de Spray PirÃlise Utilizando um Forno a GÃs Natural com CombustÃo de FiltraÃÃo / Production of Thin Films of SnO2 by Spray Pyrolysis Method Using a Furnace Gas Oven with Combustion Filtration
O diÃxido de estanho (SnO2) em forma de filme fino pode ser produzido com grande transparÃncia à luz visÃvel e boa condutividade elÃtrica. Os filmes finos de SnO2 possuem muitas aplicaÃÃes tecnolÃgicas na indÃstria, principalmente em aparelhos eletrÃnicos que utilizam display de visualizaÃÃo, como em dispositivos em laboratÃrios de pesquisa. Uma
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/03/2012
-
17. Produção de hidrogênio e etanol em reator anaeróbio de leito fluidizado: avaliação do desempenho de três materiais suporte em diferentes condições operacionais
Hydrogen and ethanol production using microorganisms is a promising area of technological development from a wide variety of renewable and alternative to this production is the use of anaerobic fluidized bed reactor (AFBR). One of the factors that most influence the performance of the AFBR is the material support, which must provide abrasion resistance, poro
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/03/2012
-
18. Aplicação da termodinâmica de processos irreversíveis à análise de secagem e determinação de propriedades térmicas de materiais porosos, por meio de funções de base radial / Irreversible thermodynamic analyses of drying and evaluation of porous media thermal properties through the radial basis functions method
Este trabalho é composto por três seções. As duas últimas seções estão relacionadas à análise do processo de secagem de um grão de trigo. A primeira seção apresentou uma nova técnica numérica para resolver problemas transientes de dispersão de contaminantes em solos não saturados. O esquema numérico serviu como base para resolver as complex
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
19. Programação de um sistema de controle de RF e aquisição de dados para um espectrômetro de RMN de baixo custo / Programming of a RF control sistem and data acquisition for a lowcost NMR spectrômeter
Este projeto teve como objetivo a construção e automatização de um espectrômetro de baixo custo que tem como principal aplicação a caracterização de meios porosos. Para realizar a caracterização de um meio poroso é necessário que o campo magnético externo aplicado não seja intenso para diminuir os problemas relacionados com a diferença de sus
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/02/2012
-
20. Relation of transverse air permeability with physical properties in different compositions of sugarcane bagasse particleboards
Studies concerning the production of particleboards with sugarcane bagasse as an alternative fibrous material have been carried out as an attempt to provide a sustainable and viable destination for this residue. This work aimed to evaluate the influence of several processing variables related to the microstructure of sugarcane bagasse particleboards (mat typ
Mat. Res.. Publicado em: 22/11/2012
-
21. Experimental investigation of the enhanced oil recovery process using a polymeric solution
Enhanced oil recovery methods are becoming an important source of oil production of wells that have already been explored and, by these methods, of increase of the total volume of oil extracted. An important example is the injection of polymeric solutions after the injected water has reached the breakthrough point. In the present work an experimental apparat
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012-09
-
22. Three-dimensional numerical modeling of RTM and LRTM processes
Resin Transfer Molding (RTM) is a manufacturing process in which a liquid resin is injected into a closed mold pre-loaded with a porous fibrous preform, producing complex composite parts with good surface finishing. Resin flow is a critical step in the process. In this work, the numerical study of the resin flow in RTM applications was performed employing a
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-06
-
23. A stress-displacement solution for a pressure tunnel with impermeable liner in elastic porous media
Considering the effects of the changes of the pore water pressure around the opening, the construction sequence of the tunnel and the interaction between the liner and the surrounding geomaterial on the mechanical response of the tunnel and in conjunction with the analyses of the continuity and boundary conditions for the stress and displacement and hydrauli
Latin American Journal of Solids and Structures. Publicado em: 2012
-
24. NUMERICAL ANALYSIS OF THE FLOW OF EMULSION THROUGH STRAIGHT AND CONSTRICTED CAPILLARIES / ANÁLISE NUMÉRICA DO ESCOAMENTO DE EMULSÕES ATRAVÉS DE CAPILARES RETOS E CAPILARES COM GARGANTA
Emulsion can be used as a mobility control agent in enhanced oil recovery methods in order to achieve a more efficient sweep of the reservoir. The application of such technique requires full understanding of how emulsions flow in a porous material. The macroscopic flow behavior can be determined based on the pore scale flow, at which emulsions cannot be trea
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/09/2011