Photoinitiator
Mostrando 13-24 de 30 artigos, teses e dissertações.
-
13. Fotofísica e fotoquímica de tioxantonas aneladas e avaliação de sua eficiência como fotoiniciador na polimerização de diacrilatos / Photophysic and photochemistry of annelated thioxanthones and evaluation of efficiency as photoinitiator in polymerization of diacrylate
Foram sintetizados a 5-tia-pentaceno-14-ona (TX-A) e a 5-tia-naftaceno-12-ona (TX-Np), dois compostos derivados da tioxantona, para serem usados como fotiniciadores em reações de polimerização de diacrilatos. Após purificação usando cromatografia em coluna e líquida de alta eficiência, esses compostos foram caracterizados por análise elementar (AE)
Publicado em: 2011
-
14. Efeito fotoiniciador sobre propriedades físicas, mecânicas e térmicas de compósitos experimentais fotoativados por luz de lâmpada halógena e LEDs / Effect of the photo-initiator on physical, mechanics and thermal properties of experimental composites photo-activated for halogen lamp and LEDs
The aim of this study was to analyze the spectrum of different lightcuring units (LCUs) and photo-initiators and yours influence in the physical and thermal properties and bond strength (BS) of experimental resin composites with different photo-initiators. A blend with BisGMA, UDMA, BisEMA, TEGDMA and 65 wt% of silanated filler particles was prepared with CQ
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/08/2010
-
15. Influence of the photoinitiator system and light photoactivation units on the degree of conversion of dental composites
The aim of this study was to observe the influence of two light polymerization units (LED or halogen light) on the degree of conversion (DC) of three dental composites with lighter shades and a different photoinitiator system. The top (T) and bottom (B) surfaces of 60 discs of composite resin (Filtek™ Supreme, Filtek™ Z250, Tetric™ Ceram Bleach) cured
Brazilian Oral Research. Publicado em: 2010-12
-
16. Effect of different photo-initiators and light curing units on degree of conversion of composites
The aim of this study was to evaluate: (i) the absorption of photo-initiators and emission spectra of light curing units (LCUs); and (ii) the degree of conversion (DC) of experimental composites formulated with different photo-initiators when activated by different LCUs. Blends of BisGMA, UDMA, BisEMA and TEGDMA with camphorquinone (CQ) and/ or 1-phenyl-1,2-
Brazilian Oral Research. Publicado em: 2010-09
-
17. Influência do sistema fotoiniciador nas propriedades fisicoquímicas de resinas experimentais / Influence of the photoinitiator system on physical-chemical properties of experimental resins
O objetivo deste trabalho foi avaliar a influência de diferentes aminas terciárias no grau de conversão, na contração de polimerização, na taxa de contração, na microdureza Knoop, na estabilidade de cor e na transmitância de luz de resinas experimentais, contendo, em peso, BisGMA e TEGDMA (3:1), 0,25% de canforquinona (CQ) e 1% de amina (DMAEMA, CE
Publicado em: 2009
-
18. Study of diferent photoinitiators in experimental resin cements photoactivated by two light curing units / Estudo de diferentes fotoiniciadores em cimentos resinosos experimentais fotoativados com duas fontes de luz
The aim of this study was to evaluate the effect of different photoinitiators on the degree of conversion and microtensile bond strength of the photoactivated resin cement used to fix a ceramic veneer on the dental structure. Seven experimental resin cements was manipulated, as the organic matrix was standardized the only variable component was the photoinit
Publicado em: 2009
-
19. Effect of therapeutic dose X rays on mechanical and chemical properties of esthetic dental materials
The aim of this study was to investigate the influence of therapeutic dose X rays on the microhardness (MH) and degree of conversion (DC) of two different esthetic restorative dental materials. The materials were photo-activated with a LED light-curing unit using three cure-times: 5, 20 and 40 seconds. The photo-activation was carried out in two distinct per
Materials Research. Publicado em: 2008-09
-
20. Aplicação de sistemas fotoiniciadores alternativos em compositos odontologicos / Aplication of alternative photoinitiator systems in dental resin composites
O presente estudo teve como objetivo investigar a aplicação de sistemas fotoiniciadores alternativos em compósitos odontológicos. Para melhor entendimento, o trabalho foi dividido em três Capítulos. O Capítulo 1 teve como objetivos específicos 1) avaliar a taxa de polimerização máxima (TPmax), grau de conversão (GC), dureza e grau de amarelo (GA)
Publicado em: 2008
-
21. Drying and shrinkage of polymer gels
The polymer hydrogel was synthesized by photo-polymerization process (UV light, 60 ºC) in presence of Photo-initiator (IrgacureR) and Cross-linker (NN'-methylene bisacrylamide; MBAM). In the present work, the drying of polymer hydrogel was carried out to study the effect of temperature, gel-sheet thickness, monomer ratio of acryl acid to acrylamide (AA/AM),
Brazilian Journal of Chemical Engineering. Publicado em: 2005-06
-
22. Desenvolvimento de sistemas fotocuraveis a partir da utilização de modelos de predição por contribuição de grupos
A study about the development of polymeric material with controllable optic and mechanical properties using models of prediction of polymers properties for groups contribution, is presented in this work. The study it was carried out in multicompound polymeric systems using a mixture of styrene monomer and polyethyleneglycoldimethacrylates with the addition o
Publicado em: 2003
-
23. Evaluation of parameters associated with UV/EB cured clearcoats degradation used in outdoor environment / Avaliação da formação e degradação de filmes de vernizes curados por radiação ultravioleta e feixe de elétrons e expostos ao envelhecimento acelerado
The materials curable by ultraviolet (UV) or electron beam (EB) radiation such as inks, adhesives and coatings are reactive compounds made up of resin, monomer, photoinitiator and additives which undergo polymerization and crosslinking under irradiation producing thermoset products. This technology has been used in a great variety of industrial applications,
Publicado em: 2003
-
24. Estudo de propriedades eletricas e caracteristicas fisico-quimicas do polipirrol obtido por sintese fotoquimica
The scientific and technological interest for the conducting polymers has increased for the fact of the possibility aplications in substitute to traditional metals. Emphasize the Polianilin, Politiofen, Poli(p-fenilen) and Polypyrrole and its derivatives. The Polypyrrole (PPy) can be obtained by chemistry synthesis, eletrochemistry and more recendy photochem
Publicado em: 2002