Phases Diagram
Mostrando 1-12 de 76 artigos, teses e dissertações.
-
1. QUANTIFICAÇÃO DE MULLITA PROVENIENTE DE RESÍDUOS DE CAULIM DA REGIÃO AMAZÔNICA: USO DO MÉTODO DE RIETVELD
Mullite is used to obtain a refractory material, there are several factors that influence the synthesis process of mullite: the preparation of the mixture, the precipitation and the reaction of SiO2 and Al2O3. For the synthesis of mullite, samples of kaolin processing residues were used as precursor material, because it presents SiO2 and Al2O3 in its composi
Quím. Nova. Publicado em: 2021-04
-
2. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
3. Life Cycle Assessment (LCA) and Wind Power Generation: Application of the Methodology and the Generator to Power System
ABSTRACT Sustainability and economics are current issues in the generation of electricity. The energy matrix is diversified and some forms have stood out, such as wind. Some tools have been developed to improve project efficiency, one of which is Life Cycle Assessment (LCA). This presents solidity when assisting projects financially and environmentally, eval
Braz. arch. biol. technol.. Publicado em: 29/10/2018
-
4. Study of Microstructure and Thermal Properties of the Low Melting Bi-In-Sn Eutectic Alloys
Beside their technological importance in soldering, the low melting eutectic alloys based on bismuth and indium have potential for commercial application in the field of phase-change materials (PCMs). In this respect, the knowledge of their microstructure and thermal properties such as melting temperature, latent heat of melting, supercooling tendency, therm
Mat. Res.. Publicado em: 11/10/2018
-
5. Phase Diagram Study for the PbO-ZnO-CaO-SiO2-"Fe2O3" System in Air with CaO/SiO2 in 1.1 and PbO/(CaO+SiO2) in 2.4 Weight Ratios
An experimental study on the phase equilibrium and the liquidus isotherms for the PbO-ZnO-CaO-SiO2-"Fe2O3" system with CaO/SiO2 in 1.1 and PbO/(CaO+SiO2) in 2.4 weight ratios, respectively, was carried out in the temperature range 1100-1300ºC (1373-1573 K). High temperature phases were determined by the equilibrium-quenching method. Results are presented in
Mat. Res.. Publicado em: 05/06/2017
-
6. Analytic Approach to Alloys Thermodynamics: Ternary Cu-Ga-Ni system
In this paper are presented the results of the calculation of thermodynamic properties in liquid state for ternary Cu-Ga-Ni alloys using the newest version of general solution model. Calculation was carried out in temperature interval 1473-2073 K, along 3 cross sections from corner of each metal, with ratios between two other metals 1:3, 1:1 and 3:1. Partial
Mat. Res.. Publicado em: 18/08/2016
-
7. Study on Magnetic Behavior of Nd8Fe84Ti2B6 Nanocomposite by FORC Diagram
Systematic investigation was made on the magnetic property of a series of Nd2Fe14B/α-Fe nanocomposites prepared by crystallization of amorphous Nd8Fe84Ti2B6 ribbon at annealing temperatures in the range of 800-860 °C. Both remanence and energy product increase with increasing annealing temperature, reaching the maximum values at 850 °C. Coercivity remains
Mat. Res.. Publicado em: 04/12/2015
-
8. Effect of phase transformations on hardness in Zn-Al-Cu Alloys
Sixteen Zn-Al-Cu alloy compositions were prepared by melting pure elements. The as-cast alloys were homogenized at 350 °C for 180 h. Both the as-cast and homogenized alloys were analyzed with X-ray diffractometer and EDX-scanning electron microscope. The Rockwell “B” hardness of both the as-cast and homogenized alloys was determined using the standard p
Mat. Res.. Publicado em: 22/09/2014
-
9. Modelos lineares mistos em dados longitudionais com o uso do pacote ASReml-R / Linear Mixed Models with longitudinal data using ASReml-R package
Currently, most part of the experiments installed is designed to be carried out observations over time or at different depths. These experiments usually have a longitudinal factor. One way of analyzing this data set is by using mixed models through means of inclusion of random effect factors, and it is possible to estimate the variance components associated
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/04/2012
-
10. CARACTERIZACÃO DAS PROPRIEDADES ESTRUTURAIS E MAGNÉTICAS DA SÉRIE SmFe1xMnxO3. / CHARACTERIZATION OF THE PROPERTIES STRUCTURAL MAGNETIC AND SERIES SmFe1 xMnxO3.
In this work we synthesized sample of the series SmFe1xMnxO3 , in which 1 x 0 whit variation of x = 0:1. Our main objective was the structural and magnetic characterization of the compounds. First, to the best of our knowledge, these samples were obtained by the combustion reaction method, with which we achieve success in obtaining unique polycrystalline pha
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/02/2012
-
11. Microstructural characterization of as-cast hf-b alloys
An accurate knowledge of several metal-boron phase diagrams is important to evaluation of higher order systems such as metal-silicon-boron ternaries. The refinement and reassessment of phase diagram data is a continuous work, thus the reevaluation of metal-boron systems provides the possibility to confirm previous data from an investigation using higher puri
Materials Research. Publicado em: 14/02/2012
-
12. Proposta de um modelo para projetos lógicos gráficos para BDOR com implementação no ArgoUML. / Proposal of a model for logical graphic projects for ORDB with implementation in the ArgoUML.
A Logical Graphic Model was proposed to support the Logical Design phase in ORDB. The Logical Graphic Model proposed is an extension of the UML Class Diagram. The extension was obtained by the elaboration of a UML Profile, which was released in XMI to be used in CASE tools from different manufacturers. Two modules were developed for ArgoUML CASE tool. These
Publicado em: 2011