Particles Coating
Mostrando 1-12 de 90 artigos, teses e dissertações.
-
1. Effect of TiC Particles Concentration on Microstructure and Properties of Ni-TiC Composite Coatings
A kind of novel anti-wear Ni-TiC composite coatings was deposited successfully on 42CrMo steel by pulsed electrodeposition method with various TiC particles concentration. The effect of TiC concentration on morphologies and properties of Ni-TiC composite coatings were investigated and the optimum concentration of TiC particle was obtained. Results demonstrat
Mat. Res.. Publicado em: 20/01/2020
-
2. β-Tricalcium phosphate shaped by replica method
Resumo Biomateriais, como o fosfato tricálcico, podem apresentar diferentes taxas de reabsorção no organismo que dependem das suas propriedades físico-químicas sendo que a condição superficial, tais como morfologia, tamanho de partículas e porosidade, é de fundamental importância. Assim, neste trabalho, estudou-se o recobrimento da matriz Luffa cyl
Cerâmica. Publicado em: 14/11/2019
-
3. Atomization Characteristics of Droplet and Morphologies of Arc Sprayed Ni-Al Particles and Composition Coatings
Droplet atomization characteristics and its morphology in twin-wire arc sprayed (TWAS) Ni-Al were explored in depth. Both numerical model and theoretical method were built for calculating the process of the droplet deformation and breakup in air flow, which based on the standard k-ε model and the volume of fluid (VOF) dual-phase flow model. The atomization
Mat. Res.. Publicado em: 23/09/2019
-
4. Statistical analysis of mechanical properties of mortars with fly ash and waste tire rubber
Resumo Este artigo tem como objetivo efetuar a análise estatística dos efeitos da inclusão da borracha de pneus inservíveis e cinza volante oriunda de usinas termelétricas como componentes da argamassa para revestimento de edificações. Foram produzidas argamassas de referência e argamassas contendo borracha com dimensão máxima dos grãos de 0,71 mm
Rev. IBRACON Estrut. Mater.. Publicado em: 23/09/2019
-
5. Nanostructured polymeric system based of cashew gum for oral admnistration of insulin
ABSTRACT The subcutaneous administration of insulin has been the treatment of millions of diabetics in the world. However, for such via insulin is invasive and not mimics the physiological action causing side effects. The oral route would be the most physiological and comfortable option, but the oral bioavailability of insulin is low by proteolytic activity
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Influence of Zirconia-Coated Bioactive Glass on Gingival Fibroblast Behavior
Resumo O objetivo deste estudo foi o desenvolvimento de um recobrimento de vidro bioativo sobre a zircônia (Zr) para modular o fenótipo de fibroblastos gengivais. Para este propósito, partículas de Biosilicato® (6 mg/mL) em um veículo a base de água/álcool isopropílico (1:1) foram aplicadas sobre discos de zircônia seguido por tratamento térmico a
Braz. Dent. J.. Publicado em: 22/07/2019
-
7. A brief review on hydroxyapatite production and use in biomedicine
Resumo A hidroxiapatita (HAp) é uma biocerâmica amplamente estudada devido à sua similaridade química com o componente mineral dos ossos. Além disso, é biocompatível, bioativa e termodinamicamente estável no fluido corporal, o que a coloca como um material atraente para uma ampla gama de aplicações no campo biomédico. Diversos esforços têm sido
Cerâmica. Publicado em: 06/06/2019
-
8. DEVELOPMENT OF AN AUTOMATED METHOD TO PERFORM A QUANTITATIVE STUDY OF PARTICLE SIZE DISTRIBUTION AND THE EFFECT OF A CONDUCTIVE LAYER IN SCANNING ELECTRON MICROSCOPY
The determination of particle size distribution is an important parameter for controlling industrial processes, particularly in the field of pharmaceuticals. It is also an important parameter for characterizing nanoparticles. The best technique for determining particle size distribution is scanning electron microscopy. The process of counting particles is ty
Quím. Nova. Publicado em: 27/05/2019
-
9. Self-assembly modification of polyamide membrane by coating titanium dioxide nanoparticles for water treatment applications
Resumo O principal objetivo do presente estudo foi modificar a superfície de uma membrana de poliamida comercial com a deposição de nanopartículas de TiO2 pelo método self-assembly sob pressão com alta permeabilidade e atividade fotocatalítica. Mudanças nas características da membrana e seu desempenho nas propriedades fotocatalíticas foram avaliado
Rev. Ambient. Água. Publicado em: 20/05/2019
-
10. Investigation on the Wear Properties of Ti/TiC/TiN Composite Coatings Prepared by Powder Cored Wires Through TIG Method at Nitrogen Atmosphere on Titanium Substrate
In this present study, Tungsten Inert Gas (TIG) welding and powder filled cored wires with nitrogen shielding gas were utilized to produce TiC and TiN surface composite coatings on the titanium (Ti) sheet substrate. The TIG procedure was done at same welding parameters for all of prepared samples. Phase analysis and microstructures were done by X-ray Diffrac
Mat. Res.. Publicado em: 15/04/2019
-
11. Effect of Experimental Parameters on Wear Response of Thermally Sprayed Carbide Based Coatings
Friction and abrasive wear response of WC-12 Co and Cr3C2-25 NiCr coatings was studied. Abrasive wear experiments were conducted with SiC abrasive particles with varying load and sliding speeds. The results were analyzed using SEM, XRD and XPS observations of worn surfaces, wear debris and worn out abrasive paper. Friction coefficient diminished with rise in
Mat. Res.. Publicado em: 08/11/2018
-
12. Effect of the Incorporation of Micro and Nanocellulose Particles on the Anticorrosive Properties of Epoxy Coatings Applied on Carbon Steel
Polymeric coatings may act as a physical barrier between the aggressive ions and the metal substrate. However, prolonged exposure may cause damage to the polymer coating, leading to a continuous reduction of the barrier effect and consequently loss of the corrosion protection. The objective of this study is to determine the effect of aminopropyltriethoxysila
Mat. Res.. Publicado em: 22/10/2018