Paper Coating
Mostrando 1-12 de 59 artigos, teses e dissertações.
-
1. Mesh reinforcement in masonry mortar coatings: a systematic literature review
Abstract Mortar coatings have a major influence on a building’s aesthetics, valorization, and habitability, with significant effects on the mechanical behavior of masonry walls. Multiple types of meshes can be embedded in plaster to enhance both masonry and coating’s mechanical behavior, restrain crack formation, enhance the bonding between layers, and i
Cerâmica. Publicado em: 2023
-
2. High-barrier and antibacterial films based on PET/SiOx for food packaging applications
Abstract High-barrier and antibacterial materials have potential applications in the field of preservative packaging for fresh meat products. In this paper, UV irradiation and silane coupling agent (KH550) were used to modify the surface of SiOx coating on polyester (PET)/SiOx film to prepare the PET/SiOx/chitosan and PET/SiOx/chitosan-nano-ZnO composite fil
Food Sci. Technol. Publicado em: 2021-09
-
3. Comparison of subcutaneous inflammatory response to commercial and engineered zinc hydroxyapatite implants in rabbits
RESUMO A hidroxiapatita (HA) é amplamente utilizada como biomaterial para reparo ósseo e revestimento de próteses metálicas. As principais limitações dos atuais compostos comerciais de hidroxiapatita sintética incluem alto custo e menor disponibilidade, especialmente para fins de medicina veterinária. Além disso, acredita-se que a biocompatibilidade
Arq. Bras. Med. Vet. Zootec.. Publicado em: 13/12/2019
-
4. RE-ESTERIFICATION OF MACAUBA ACID OIL USING GLYCEROL FOR ACIDITY REDUCTION AND BIODIESEL PRODUCTION
Abstract Biodiesel production using acid oils is an important alternative for biofuel cost reduction. However, it is a huge challenge for homogeneous transesterification, the main industrial route commonly used. This paper presents macauba oil with high acidity, 43.90 w/w%, as a potential raw material for biodiesel production. The acidity was reduced to 0.8
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
5. Detecção de corrosão em concreto armado com termografia infravermelha e ultrassom
Resumo A corrosão do aço é uma das principais manifestações patológicas em concreto armado. Sua detecção precoce pode evitar tanto custosos reparos quanto danos aos usuários. Este artigo propõe o uso da termografia infravermelha e do ultrassom para a detecção de corrosão em concreto armado. A metodologia consistiu na elaboração de 6 corpos de
Ambient. constr.. Publicado em: 10/06/2019
-
6. Corrosion and Micro-abrasive Wear Behaviour of 2524-T3 Aluminium Alloy with PAni-NPs/PSS LbL Coating
In this paper, we present an alternative method to obtain thin films for coating protection on the surface of the AA2524-T3 Al-alloy by using the Layer-by-Layer (LbL) technique. The LbL films were fabricated by alternated immersion of the Al-alloy into a poly(styrene sulfonate) (PSS) and polyaniline nanoparticles (PAni-NPs) solutions, obtaining a PAni-NPs/PS
Mat. Res.. Publicado em: 06/06/2019
-
7. An Investigation on Surface Roughness and Tool Wear in Turning Operation of Inconel 718
ABSTRACT: This paper investigates the influences of three different input parameters, such as feed rate, insert nose radius, and insert coating methods, in the turning operation of Inconel 718. The coating methods were selected as medium temperature chemical vapor deposition (MT-CVD) and physical vapor deposition (PVD) and in addition to coating methods, the
J. Aerosp. Technol. Manag.. Publicado em: 25/02/2019
-
8. Multiobjective and Multicase Optimization of a Spacecraft Radiator
ABSTRACT Optimization is now an established tool for obtaining better solutions in engineering design. Nevertheless, the multiplicity of possible applications and the continuing search for better computational performance has motivated researchers in continuing to propose new methods, as well as improvements on existing ones. Not only optimization has allowe
J. Aerosp. Technol. Manag.. Publicado em: 07/01/2019
-
9. Effect of Experimental Parameters on Wear Response of Thermally Sprayed Carbide Based Coatings
Friction and abrasive wear response of WC-12 Co and Cr3C2-25 NiCr coatings was studied. Abrasive wear experiments were conducted with SiC abrasive particles with varying load and sliding speeds. The results were analyzed using SEM, XRD and XPS observations of worn surfaces, wear debris and worn out abrasive paper. Friction coefficient diminished with rise in
Mat. Res.. Publicado em: 08/11/2018
-
10. Early fragmentation of polyester urethane sheet neither causes persistent oxidative stress nor alters the outcome of normal tissue healing in rat skin
Abstract Silicone breast implant is associated with complications inherent to the surgical procedure. Prosthesis coating with polyurethane, however, commonly reduces the incidence of such complications. In this paper, the authors evaluated the inflammatory histomorphometric profile and oxidative damage associated to the implant of polyester urethane sheets.
An. Acad. Bras. Ciênc.. Publicado em: 26/07/2018
-
11. Extensión de durabilidad de pistones de bombas de fractura hidráulica mediante el empleo de tecnología de nitruración por plasma y PVD
ABSTRACT Hydraulic stimulation technique consists of "fracturing" the formation (rock reservoirs) through pumping a fracturing fluid downhole. This operation is performed by using hydraulic fracturing pumps. The pistons of these pumps are mechanical components performing the intake and compressing fracture fluid by reciprocating action. During this alternati
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Caracterización del comportamiento frente a la corrosión en soldaduras de recargue de aceros inoxidables superdúplex
ABSTRACT Superduplex stainless steels have a dual structure constituted approximately by 50% of ferrite and 50 % of austenite. This fact produces a good combination of mechanical properties and corrosion resistance. Thanks to these features their use is growing, mainly in the industries of paper, chemical, gas and oil. Surfacing welding is used for the manuf
Matéria (Rio J.). Publicado em: 19/07/2018