Paper Based Devices
Mostrando 1-12 de 62 artigos, teses e dissertações.
-
1. Single-Layered Paper-Based Microfluidic Devices Made by Paint-Spraying Technique with Great Barrier Resistance for Colorimetric Assays
The single-layered paint-spraying paper based microfluidic devices (sp-μPADs) have been for the first time integrated with the colorimetric assay. The polymethyl methacrylate (PMMA) board was applied as the mask instead of the iron mask, reducing the power requirement of the cutting machine. The paint was sprayed into the paper, which blocked the pores of t
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
2. Characterization of Otto Chips by Particle Swarm Optimization
Abstract Recently a surface plasmon resonance (SPR) optical sensor, based on the Otto configuration — the Otto chip — has been developed. One essential step in the quality control of the fabrication process is characterization of the active region of several devices in a batch. Characterization is done by measuring the angular spectrum of the optical re
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
3. Descolonizar o pensamento museológico: reintegrando a matéria para re-pensar os museus
RESUMO O artigo apresenta uma reflexão com bases teóricas sobre as estruturas coloniais dos museus, considerando historicamente o desenvolvimento dessas instituições no Brasil desde a criação do Museu Nacional do Rio de Janeiro, em 1818. Propõe a descolonização do pensamento museológico por meio do reconhecimento crítico de suas bases no Iluminism
An. mus. paul.. Publicado em: 17/01/2020
-
4. RFID na edificação: proposta de modelo de sistema para organização das informações de manutenção
Resumo A indústria da construção civil é vista como uma indústria baseada no conhecimento. Ao longo do processo de projeto de uma edificação várias informações são geradas e compõem uma série de documentos que, após a conclusão da obra, devem ser entregues aos proprietários e gestores das edificações para a devida manutenção do imóvel. E
Ambient. constr.. Publicado em: 03/10/2019
-
5. Application of an alternative mesh morphing method on the numerical modeling of oscillating wave surge converters
RESUMO Uma das tecnologias capazes de explorar a energia das ondas, baseada na captação das componentes horizontais do movimento destas, aliada a um sistema placa-pistão, vem experimentando um notável desenvolvimento ao longo dos últimos anos, tal dispositivo é conhecido como conversor oscilante por translação de ondas. Este possui um grande potencia
RBRH. Publicado em: 29/07/2019
-
6. Mathematical Modeling and Parameter Estimation of Battery Lifetime using a Combined Electrical Model and a Genetic Algorithm
RESUMO Neste artigo é proposta uma metodologia baseada na meta-heurística Algoritmo Genético para estimar os parâmetros no modelo Chen e Rincón-Mora, sendo este aplicado na modelagem matemática do tempo de vida de baterias de Lítio-íon Polímero. O modelo também é parametrizado a partir da metodologia convencional, que necessita de dados obtidos po
TEMA (São Carlos). Publicado em: 06/06/2019
-
7. Development and Characterization of PbI2 Nanoparticles for all Solid-State Flexible Supercapacitor Purposes
The development and utilization of new energy sources has been extensively studied in the world. Here, we report the development of flexible self-supported metal-free electrodes based on non-oxidized graphene multilayer (MLG) paper containing the lead iodide nanoparticles (PbI2-NPs). The PbI2-NPs was obtained and characterized by X-ray diffraction (XDR) and
Mat. Res.. Publicado em: 20/05/2019
-
8. An Amorphous Silicon Photo TFT with Si3N4/Al2O3 or HfO2 Double Layered Insulator for Digital Imaging Applications
Abstract This paper focuses on amorphous silicon photo thin-film transistors with double layered insulator using Si3N4/Al2O3 or HfO2 as candidates for the succession of Si3N4 as a traditional insulator in the fabrication of hydrogenated amorphous silicon thin-film transistors. Whether for industry or for research, there is a need to investigate the use of th
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2019-03
-
9. Impact of regulations on innovation in the field of medical devices
Abstract Introduction The regulatory framework and standardized assay methods for classical biomaterials and implantable devices are harmonized at the international level, based on the risk assessment. However, innovative products need the development of more appropriate assay methods and streamline regulatory and scientific evaluation to encourage innovat
Res. Biomed. Eng.. Publicado em: 29/11/2018
-
10. Electrical and optical numerical modeling of DP-PPV based polymer light emitting diode
Abstract In this paper, an in-depth study of the electrical and optical characteristics of Polymer Light Emitting Diodes ITO/PEDOT: PSS/DP-PPV derivatives/Al(Ca) is presented. Three polymer materials are considered; poly(2,3-diphenyl-5-(4-heptyloxy-4'-oxytrimethylenediphenyl)-phenylenevinylene) (P1), poly(2,3-diphenyl-5-[4-(4-pentylcyclohexyl)phenoxy]-propyl
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-06
-
11. Compensation technique for environmental and light source power variations applied in a polymer optical fiber curvature sensor for wearable devices
Abstract Introduction Polymer optical fibers (POF) are lightweight, present high elastic strain limits, fracture toughness, flexibility in bend, and are not influenced by electromagnetic fields. These characteristics enable the application of POF as curvature sensor and can overcome the limitations of the conventional technologies, especially for wearable a
Res. Biomed. Eng.. Publicado em: 05/03/2018
-
12. Paper-Based Microfluidics Immunoassay for Detection of Canine Distemper Virus
ABSTRACT Paper-based devices present low-cost and are versatile, making them very attractive for clinical analysis. To manufacture those devices wax patterns are printed on paper surface and upon heating the wax permeates through the entire thickness of the paper, creating hydrophobic barriers that delimit test areas. Antibodies produced in rabbits against c
Braz. arch. biol. technol.. Publicado em: 08/01/2018